MSDS   : CELANEX 3300 NATURAL EE-2001 CAS   : 14808-60-7 NAME   : polybutylene terephthlate silica, crystalline - quartz
===================== Product Identification =====================
MSDS NAME:CELANEX 3300 NATURAL EE-2001
NIIN:00N002821
MSDS Number: BCJFM
=== Responsible Party ===
Company:CELANESE PLASTIC & SPECIALTIES COMPANY
Emergency Phone Num:201-635-2600
CAGE:90614
=== Contractor Identification ===
Company:CELANESE PLASTIC & SPECIALTIES COMPANY
CAGE:90614
============= Composition/Information on Ingredients =============
Name:POLYBUTYLENE TEREPHTHLATE
Name:SILICA, CRYSTALLINE - QUARTZ
CAS:14808-60-7
RTECS #:VV7330000
Fraction by Wt: 30%
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293
===================== Hazards Identification =====================
Effects of Overexposure:UNKNOWN WITH MANUFACTURED FORM.
======================= First Aid Measures =======================
First Aid:SKIN: IF MOLTEN POLYMER SHOULD COME IN CONTACT WITH SKIN.
COOL RAPIDLY WITH COLD WATER AND OBTAIN MEDICAL ATTENTION FOR
THERMAL BURN.
===================== Fire Fighting Measures =====================
Extinguishing Media:DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:SPILLED PELLETS SHOULD BE SWEPT UP AND
DISPOSED OF TO AVOID LOSS OF FOOTING.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL DRY PLACE
============= Exposure Controls/Personal Protection =============
Respiratory Protection:MFR REQUIRED NONE DURING NORMAL PROCESSING.
Ventilation:LOCAL EXHAUST REQUIRED. MECHANICAL ACCEPTABLE, TO KEEP TLV.
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Supplemental Safety and Health
MELTING POINT: 442F,228C.
================== Physical/Chemical Properties ==================
Spec Gravity:1.52
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CYLINDRICAL WHITE PELLETS; ODORLESS
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES AND OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT HEAT ABOVE 550F AND AVOID PROLONGED
EXPOSURE >520F.
Hazardous Decomposition Products:BUTADIENE
==================== Disposal Considerations ====================
Waste Disposal Methods:MFR RECOMMENDS LANDFILL. WASTE DISPOSAL METHOD
MUST BE IAW FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD ***
ALL PAGES On Chemical Property IN THIS GROUP