===================== Product Identification =====================
MSDS NAME:HARDENER FOR EPOXY RESINS, HP-8 HARDENER
NIIN:00N002058
MSDS Number: BCJCL
=== Responsible Party ===
Company:DELTA PLASTICS COMPANY, INC.
Country:US
Emergency Phone Num:209-732-4823
CAGE:DO191
=== Contractor Identification ===
Company:DELTA PLASTICS CO.
Address:280 MAIN ST. PO BOX 489
Box:489
City:PIXLEY
State:CA
ZIP:93256
Phone:209-757-2010
CAGE:DO191
============= Composition/Information on Ingredients =============
Name:ALKYLENE AMINE
===================== Hazards Identification =====================
Effects of Overexposure:INHAL: IRRIT & MAY CAUSE ASTHMA. SKIN: BURNS,
RASH, EYE: BURNS
======================= First Aid Measures =======================
First Aid:INHAL: REMOVE TO FRESH AIR. SKIN: FLUSH W/ WATER FOLLOWED BY
WASHING W/ SOAP & WATER. REMOVE CONTAMINATED CLOTHES & WASH BEFORE
REUSE. EYE: FLUSH W/ WATER FOR 15 MIN. GET MD ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point:215F,102C, COC
Extinguishing Media:CO*2, OR DRY CHEM FOR SMALL FIRES. POLYMER
FOAM-LARGE FIRES
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:DILUTION W/ LARGE VOLUMES OF WATER MAY
REDUCE INTENSITY OF FLAME
================== Accidental Release Measures ==================
Spill Release Procedures:FLUSH AWAY SPILLED MATERIAL W/ LARGE VOLUMES
OF WATER
====================== Handling and Storage ======================
Handling and Storage Precautions:DANGER! LIQUID CAUSES EYE INJURY &
SKIN BURN. BREATHING OF VAPOR MAY BE HARMFUL. USE W/ ADEQUATE
VENTILATION.
Other Precautions:AVOID CONTACT. IF CONTACT OCCURS, FLUSH WITH PLENTY
OF WATER FOR 15 MINS; FOR EYES. GET MEDICAL ATTENTION.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPRVD CHEM CARTRIDGE RESPIRATOR
(MFR)
Ventilation:LOCAL-PREFERABLE. GENERAL-ACCEPTABLE, TO MAINTAIN BELOW
TLV.
Protective Gloves:RUBBER
Eye Protection:COVERALL GOGGLES
Other Protective Equipment:FACE SHIELD, RUBBER APRON, EYE BATH & SFTY
SHOWER
Supplemental Safety and Health
PRODUCT CLASS: ALKYLENEAMINE. MFR ADDRESS: 7449 AVE 304 VISALIA, CA.
93277. PART B OF A 2-PART KIT.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:404F;207C
Vapor Density:>1
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION W/ ACIDS
Conditions to Avoid Polymerization:ACIDS &/OR LARGE QUANTITIES OF EPOXY
RESINS
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE IN A FURNACE OR BURY (RECOMND BY
MFR). DISPOSAL MUST BE IAW FED, ST & LOCAL REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|