===================== Product Identification =====================
MSDS NAME:EPOXY RESIN ER-20
NIIN:00N002058
MSDS Number: BCJCK
=== Responsible Party ===
Company:DELTA PLASTICS COMPANY, INC.
Country:US
Emergency Phone Num:209-651-2094
CAGE:DO191
=== Contractor Identification ===
Company:DELTA PLASTICS CO.
Address:280 MAIN ST. PO BOX 489
Box:489
City:PIXLEY
State:CA
ZIP:93256
Phone:209-757-2010
CAGE:DO191
============= Composition/Information on Ingredients =============
Name:DIGLYCIDYL ETHER OF BISPHENOL A
CAS:1675-54-3
RTECS #:TX3800000
===================== Hazards Identification =====================
Effects of Overexposure:EYE: IRRIT. SKIN: IRRIT & DERMATITIS
======================= First Aid Measures =======================
First Aid:EYE: FLUSH W/ WATER FOR 15 MIN, CONSULT MD IMMEDIATELY. SKIN:
WASH W/ SOAP & WATER. REMOVE & WASH CONTAMINATED CLOTHING BEFORE
REUSE
===================== Fire Fighting Measures =====================
Flash Point:415F,213C, COC
Extinguishing Media:CO*2, FOAM, DRY CHEM
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE
Unusual Fire/Explosion Hazard:AVOID HEAT, OPEN FLAMES & ELECTRICAL
SPARKS
================== Accidental Release Measures ==================
Spill Release Procedures:SOAK UP IN ABSORBENT MATERIAL & FLUSH W/
PLENTY OF WATER
====================== Handling and Storage ======================
Other Precautions:AVOID SKIN CONTACT. AVOID INHAL OF VAPORS. MAY CAUSE
IRRITATION.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPRVD AIR MASK IN CONFINED AREAS
(MFR)
Ventilation:LOCAL-PREFERRED
Protective Gloves:RECOMMENDED
Eye Protection:SFTY GLASS OR GOGGLES
Other Protective Equipment:SFTY SHOWER & EYE BATH. COVERALLS OR APRON
Supplemental Safety and Health
MFR ADDRESS: 7449 AVE 304, VISALIA, CA 93291. PART A OF A 2-PART KIT.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:>500F;260C
Vapor Density:>1
Spec Gravity:1.14
Evaporation Rate & Reference:<1 (ETHER=1)
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, AMINES, MERCAPTAINS & BASES
Conditions to Avoid Polymerization:STRONG ACIDS, AMINES, MERCAPTAN &
BASES.
==================== Disposal Considerations ====================
Waste Disposal Methods:MFR RECOMMENDS INCINERATION IN FURNACE OR
LANDFILL DISPOSAL METHOD MUST BE IAW FED, STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|