| MSDS | : | TURBINE OIL GST ISO 32, CPS253026 | | CAS | : | | | NAME | : | additives
spill proc: approp tech such as sorbent matls/pumping.
ing 5:prescribed proc for reporting and responding to large
chevron turbine oil gst iso 32 containing ients 2-3
lubricating base oil may be a mixt of any of the following:
ing 2:64741-97-5, 64742-01-4, 64742-52-5, 64742-53-6,
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:TURBINE OIL GST ISO 32, CPS253026
NIIN:00N035906
MSDS Number: BQLLV
=== Responsible Party ===
Company:CHEVRON
Box:4054
City:RICHMOND
State:CA
ZIP:94804
Country:US
Info Phone Num:800-582-3835
Emergency Phone Num:800-457-2022;800-424-9300(CHEMTREC)
CAGE:5X392
=== Contractor Identification ===
Company:GARLOW PETROLEUM CO
Address:707 KAKOI STREET
Box:City:HONOLULU
State:HI
ZIP:96819
Country:US
Phone:808-836-1957
CAGE:5X392
============= Composition/Information on Ingredients =============
Name:ADDITIVES
Fraction by Wt: <1%
Name:SPILL PROC: APPROP TECH SUCH AS SORBENT MATLS/PUMPING.
WHERE FEASIBLE & APPROP, REMOVE CONTAMD SOIL. FOLLOW (ING 6)
RTECS #:9999999ZZ
Name:ING 5:PRESCRIBED PROC FOR REPORTING AND RESPONDING TO LARGE
RELEASES.
RTECS #:9999999ZZ
Name:CHEVRON TURBINE OIL GST ISO 32 CONTAINING INGREDIENTS 2-3
RTECS #:9999999ZZ
Fraction by Wt: 100%
Name:LUBRICATING BASE OIL MAY BE A MIXT OF ANY OF THE FOLLOWING:
CAS #: 64641-88-4, 64741-89-5, 64741-96-4, (ING 3)
Fraction by Wt: >99%
Name:ING 2:64741-97-5, 64742-01-4, 64742-52-5, 64742-53-6,
64742-54-7, 64742-62-7, 64642-65-0, 72623-83-7
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE/SKIN: SUBSTANCE IS NOT
EXPECTED TO CAUSE PRLNGD/SIGNIFICANT IRRIT. HAZ EVALUATION IS BASED
ON DATA FROM SIMILAR MATLS. INHAL/INGEST: SUBSTANCE IS CONSIDERED
PRACTICALLY NON-TOX TO INTERNAL ORGANS. HAZ EVALUATION IS BASED ON
DATAFROM SIMILAR MATLS. PROD CNTNS PETROLEUM BASE OILS REFINED BY
A(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: COMBINATION OF SEV HYDROCRACKING &
HYDROTREATING. POTNTL OF PARAFFINIC BASE OIL PREPARED BY THIS
PROCESS TO CAUSE CANCER HAS NOT BEEN SPECIFICALLY ADDRESSED BY OSHA
HAZ COMMUNICATION STD(29C FR1910.1200), INTL AGENCY FOR RESEARCH ON
CANCER (IARC),NOR NATL TOX PROGRAM (NTP) ANNUAL RPT. HOWEVER, THE
(SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYE: NO FIRST AID PROC ARE REQD. HOWEVER, AS A PREC FLUSH
W/FRESH WATER FOR @ LST 15 MIN. REMOVE CONT LENSES IF WORN. SKIN:
NO FIRST AID PROC ARE REQD. AS A PREC, WASH THORO W/SOAP/WATER.
REMOVE & WAS H CONTAMD CLTHG. INHAL: NO FIRST AID PROC ARE REQD.
REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE O*2/ARTF RESP) . INGEST:
GIVE WATER/MILK TO DRINK & TELEPHONE FOR MED ADVICE. CONSULT (SUPP
DATA)
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:374F,190C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM AND WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
================== Accidental Release Measures ==================
Spill Release Procedures:MATL IS NOT EXPECTED TO PRESENT ANY
ENVIRONMENTAL PROBLEMS OTHER THAN THOSE ASSOC W/OIL SPILLS. STOP
SOURCE OF LEAK/REL. CLEAN UP REL AS SOON AS POSS. CNTN LIQ TO PVNT
FURTHER CONTAM OF SOIL, SURF WAT ER/GROUNDWATER. CLEAN UP SM SPILLS
USING (ING 5)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT WELD, HEAT/DRILL CNTNR. RESIDUE
MAY IGNITE W/EXPLOSIVE VIOLENCE IF HEATED SUFFICIENTLY. DO NOT USE
PRESS TO EMPTY DRUM OR EXPLOSION MAY RESULT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NO SPECIAL RESP PROT IS NORMALLY REQD. HOWVER,
IF OPERATING CNDTNS CREATE AIRBORNE CONC WHICH EXCEED RECOMM EXPOS
STD, THE USE OF AN NIOSH/MSHA APPRVD RESPIRATOR IS REQUIRED.
Ventilation:USE ADEQ VENT TO KEEP AIRBORNE CONC OF THIS MATERIAL BELOW
THE RECOMMENDED EXPOSURE STANDARD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SKIN CONTACT CAN BE MINIMIZED BY WEARING
PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP: PROCESS CNDTNS, CHEM ANALYSES, & RSLTS OF MUTAG TESTS
ALL SUPPORT OUR OPINION THAT THIS OIL SHOULD NOT CAUSE SKIN CANCER.
FIRST AID PROC: MED PERS BEFORE INDUCE VOMIT. IF MED ADVICE C ANNOT
BE OBTAINED, THEN TAKE PERSON & PROD CNTNR TO NEAREST MED EMERGENCY
TREATMENT CENTER OR HOSPITAL.
================== Physical/Chemical Properties ==================
HCC:V6
Spec Gravity:0.87
Solubility in Water:INSOLUBLE
Appearance and Odor:YELLOW LIQUID.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING AGENTS, SUCH AS CHLORATES, NITRATES,
PEROXIDES, ETC.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL COMBUSTION FORMS CARBON DIOXIDE
AND WATER VAPOR; INCOMPLETE COMBUSTION CAN PRODUCE CARBON MONOXIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:PLACE CONTAMD MATLS IN DISPOSABLE CONTAINERS AND
DISPOSE OF IN A MANNER CONSISTENT WITH FEDERAL, STATE & LOCAL
APPLICABLE REGULATIONS. CONTACT LOCAL ENVIRONMENTAL OR HEALTH
AUTHORITIES FOR APPROVED DI SPOSAL OF THIS MATERIAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
LAPPING VEHICLES (A), DP-704
| 107-21-1
111-76-2
1330-20-7
67-56-1 |
|
LAPPING VEHICLES (A), DP-706
| 107-21-1
111-76-2
1330-20-7
67-56-1 |
|
LAPPING VEHICLES (A), DP-708
| 107-21-1
111-76-2
1330-20-7
67-56-1 |
|
DERUSTO C-H-64 BARBEQUE BLACK ENAMEL
| 1333-86-4
111-76-2
67-63-0
30136-13-1
7732-18-5 |
|
NORFOX 92% GRANULES, 1009
| |
|
KEROSENE DEODORIZED
| 64742-96-7 |
|
Q.D. ENAMEL SUPER WHITE, 290100
| 8052-41-3 |
|
POLYESTER RESIN 1070-5, 75157201
| 100-42-5 |
|
BLUE THUNDER FLOOR FINISH, 105890
| 78-51-3
111-77-3
7732-18-5 |
|
PRO TEK TOUGH COAT CATALYZED EPOXY ENAMEL (
| 64742-47-8
1330-20-7
64742-95-6
111-76-2
107-21-1
14807-96-6
13463-67-7 |
|
CAL PWB86 REV WHITE TINTABLE LATEX, CAL3
| 107-21-1
7664-41-7
64742-47-8 |
|
PAINT, 85
| 67-56-1
75-09-2
64742-94-5 |
|
SB BONDING AGENT
| 50-00-0
50-00-0 |
|
PASTE-FLAT, 110595
| 14807-96-6
14808-60-7
112926-00-8
108-65-6 |
|
TEF-LEX, 5063
| 71-55-6 |
|
ACETAL SHAPES, ACE
| |
|
SPACKLING PASTE
| 1317-65-3
7732-18-5
12001-26-2
14807-96-6
9003-20-7
1332-58-7
9004-62-0 |
|
INGERSOLL-RAND DSL-125
| |
|
NUTS N BOLTS 427
| 128-44-9
80-15-9 |
|
LEAD FREE PLUMBING SOLDER
| 7440-31-5
7440-22-4
7440-36-0
7440-50-8 |
|
OXFORD KLEEN BRAKE, 07009
| 71-55-6
124-38-9
67-63-0 |
|
OXFORD LIFT, 07502
| 111-76-2
6834-92-0
7732-18-5
7758-29-4
25155-30-0 |
|
GREEN WELDABLE PRIMER, X-6468
| 1330-20-7
108-88-3
8032-32-4
64742-89-8
100-41-4 |
|
ENPLATE PC-237, 3216
| 7732-18-5
7647-01-0 |
|
C*14-C*16 NORMAL PARAFFINS
| |
|
M.E.K. KLEAN STRIP, GME71
| 78-93-3 |
|
HEAT STOP
| 14464-46-1
1302-78-9
1344-28-1 |
|
OPTICLEAN POLYMER 60.118 (FORMERLY 60.120)
| 64-17-5
141-78-6 |
|
BONUTITE WHITE DIAMOND BODY FILLER
| 100-42-5
25464-21-5
14807-96-6
10483-67-7 |
|
CHEMOLA DRY TFE LUBE 910
| 71-55-6
74-98-6
106-97-8 |
|
SIL-X GREASE NLGI 1, CPS255779
| 112945-52-5 |
|
PR-868, PART A
| 26447-40-5
9016-87-9
61788-32-7
69102-90-5 |
|
PR-868, PART B
| 25791-96-2
8001-79-4
25190-06-1
69102-90-5 |
|
NUZ; WHITE VITRIOL; ZINC SULFATE; ZINC (SUP
| 7733-02-0 |
|
STARTING FLUID
| 60-29-7
106-97-8 |
|
BOUNCE BACK
| 111-90-0 |
|
F-20 DARK GRAY 26008, 820S2968
| 1314-13-2
63148-69-6
112945-52-5
1344-37-2
14807-96-6
8052-41-3
64742-89-8
13463-67-7 |
|
SF-730NT1 BLACK TONER
| 1333-86-4 |
|
LOW VISCOSITY MINERAL OIL, DROMUS OIL B
| |
|
TOWLINE ROCKET
| 1332-37-2
7790-98-9
7440-42-8
10022-31-8 |
|
ROCK DRILL OIL VISTAC ISO 32, CPS232500
| 63449-39-8
64742-98-6 |
|
ALKYD Q.D. MEDIUM GLOSS ENAMEL, 37
| 64742-47-8 |
|
SELECTRON RHODIUM HB SOLUTION, SPS 5805
| 7440-16-6
7664-93-9
7732-18-5 |
|
SURF-KOTE A-1625 AEROSOL
| 1317-33-5
7782-42-5
108-88-3
64-17-5
64742-14-9
75-09-2
68476-86-8 |
|
HOT PRESSED CERAMIC GRADE TBH
| 1344-28-1
1314-23-4
1314-36-9 |
|
1920 DEFOMER
| |
|
WELDWOOD FLOOR TILE CEMENT (3081)
| 64742-11-6
8052-41-3
9016-45-9 |
|
TURBINE OIL GST ISO 32, CPS253026
| |
|
SOLDER ALLOYS CONTAINING LEAD
| 7439-92-1
7440-31-5
7440-22-4
7440-69-9
7440-36-0
7440-50-8
7440-74-6 |
|
NORTHERN HYDRAULICS SAE 30 COMPRESSOR OIL,
| 64742-65-0
64742-62-7 |
|
|