===================== Product Identification =====================
MSDS NAME:MSP001 PODOPHYLLUM RESIN
NIIN:01-145-5217
MSDS Number: BWXTJ
=== Responsible Party ===
Company:MALLINCKRODT INC
Address:PARIS BYPASS US 68
Box:800
City:PARIS
State:KY
ZIP:40362-5000
Country:US
Info Phone Num:314-539-1600/800-354-2050
Emergency Phone Num:314-539-1600/800-354-2050
CAGE:62910
=== Contractor Identification ===
Company:MALLINCKRODT SPECIALTY CHEMICALS CO
Address:222 RED SCHOOL LANE
Box:City:PHILLIPSBURG
State:NJ
ZIP:08865
Country:US
Phone:908-859-2151
CAGE:62910
============= Composition/Information on Ingredients =============
Name:PODOPHYLLIN RESIN
CAS:9000-55-9
RTECS #:TP8925000
===================== Hazards Identification =====================
LD50 LC50 Mixture:ORAL DL50(MOUSE): 68 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE FATAL IF SWALLOWED,
INHALED/ABSORBED THROUGH SKIN. INHALATION: CAUSTIC, SEVERE
IRRITATION TO THE MUCOUS MEMBRANES. INGESTION: IRREGULAR
HEARTBEAT/DEATH. SKIN: CAUSTIC, SEVERE IRRITATION/KERATIT IS,
ULCERS, ABSORPTION. EYES: SEVERE IRRITAITON, CONJUNCTIVITIS. A
FETAL TOXIN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, COUGHING, SHORTNESS OF BREATH,
BURNING, VOMITING, DIARRHEA, MENTAL CONFUSION, WEAKNESS,
INCOORDINATION, PALENESS, COLLAPSE, FALL IN BLOOD PRESSURE, COMA,
INFLAMMATION, PAIN
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. INGESTION: GIVE PLENTY OF
MILK/WATER. NEVER GIVE ANYTHING BY MOUTH IF UNCONSCIOUS. SKIN:
IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS. EYES: WASH
W/PLENTY OF WATER FOR 15 MINS. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
===================== Fire Fighting Measures =====================
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, ALCOHOL FOAM/CO2
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING & NIOSH APPROVED
SELF CONTAINED BREATHING APPARATUS W/FULL FACEPIECE OPERATED IN THE
PRESSURE DEMAND/OTHER POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:AS W/MOST ORGANIC SOLIDS, FIRE IS
POSSIBLE AT ELEVATED TEMPS/BY CONTACT W/AN IGNITION SOURCE.
================== Accidental Release Measures ==================
Spill Release Procedures:VENTILATE AREA. REMOVE ALL IGNITION SOURCES.
WEAR PROTECTIVE CLOTHING & RESPIRATORY EQUIPMENT SUITABLE FOR
TOXIC/CORROSIVE DUST. SWEEP UP & PLACE IN A BAG & HOLD FOR WASTE
DISPOSAL. AVOID RAISING DUST .
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP IN A TIGHTLY CLOSED CONTAINER.
STORE IN A COOL, DRY, VENTILATED AREA AWAY FROM SOURCES OF
HEAT/IGNITION. PROTECT AGAINST DAMAGE.
Other Precautions:ISOLATE FROM OXIDIZING MATERIALS. AVOID CONTACT
W/EYES, SKIN & CLOTHING. DON'T WEAR CONTACT LENSES WHEN WORKING
W/THIS MATERIAL.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHERE EXPOSURE TO DUST IS APPARENT, A DUST/MIST
RESPIRATOR MAY BE WORN. FOR EMERGENCIES, A SELF CONTAINED BREATHING
APPARATUS.
Ventilation:LOCAL EXHAUST TO PREVENT DISPERSION OF THE CONTAMINANT INTO
THE WORKROOM AIR.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL SAFETY GOGGLES/FULL FACE SHIELD
Other Protective Equipment:IMPERVIOUS PROTECTIVE CLOTHING; BOOTS, LAB
COAT, APRON/COVERALLS, EYE WASH FOUNTAIN & QUICK DRENCH FACILITIES.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Appearance and Odor:LIGHT BROWN TO GREENISH-YELLOW POWDER W/SLIGHT
CHARACTERISTIC ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:ELEVATED TEMPS, HEAT & OTHER IGNITION
SOURCES.
Hazardous Decomposition Products:ACRID SMOKE & FUMES WHEN HEATED TO
DECOMPOSITION.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISSOLVE/MIX MATERIAL W/A COMBUSTIBLE SOLVENT &
BURN IN A RCRA APPROVED CHEMICAL INCINERATOR EQUIPPED W/AN
AFTERBURNER & SCRUBBER/TRANSFER IN A CLOSED METAL CONTAINER & SEND
TO AN APPROVED WASTE DISPO SAL FACILITY IAW/LOCAL, STATE &
FEDERALREGULATION
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|