=====================  Product Identification  =====================

MSDS NAME:DIMETHYL SILOXANE GREASE
NIIN:00-598-7445
MSDS Number: CBSBC
=== Responsible Party ===
Company:GENERAL ELECTRIC CO., SILICONE PRODUCT DIV.
Address:260 HUDSON RIVER ROAD
City:WATERFORD
State:NY
ZIP:12188
Country:US
Info Phone Num:518-237-3330
Emergency Phone Num:518-237-3330
Preparer's Name:DA POLSINELLI
CAGE:01139
=== Contractor Identification ===
Company:GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
Address:260 HUDSON RIVER RD
Box:City:WATERFORD
State:NY
ZIP:12188
Country:US
Phone:518-237-3330/800-332-3390
CAGE:01139

=============  Composition/Information on Ingredients  =============

Name:POLY (DIMETHYLSILOXANE)
CAS:63148-62-9
RTECS #:JJ6484500
Fraction by Wt: 80-99%
Other REC Limits:NONE RECOMMENDED

Name:SILICA GEL
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 5-10%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50 (ORAL RAT) IS UNKNOWN.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE MILD SKIN IRRITATION. AN
    INHALATION DUST HAZARD MAY BE CREATED IF, UNDER CONDITIONS OF USE
    SOLID PARTICLES ARE SEPARATED FROM THE POLYMERIC MATRIX. MAY
    IRRITATE EYES. CHRONIC EXPOSURE MAY CA USE RESPIRATORY AILMENTS
    AND/OR SILICOSIS.
Explanation of Carcinogenicity:CAN GENERATE FORMALDEHYDE AT HIGH
    TEMPERATURES WHICH IS AN IRRITANT AND POTENTIAL CANCER HAZARD.
Effects of Overexposure:THIS PRODUCT CONTAINS METHYLPOLYSILOXANES WHICH
    CAN GENERATE FORMALDEHYDE. FORMALDEHYDE IS A DKIN AND RESPIRATORY
    SENSITIZER, EYE AND THROAT IRRITANT, ACUTE TOXICANT AND POTENTIAL
    CANCER HAZARD. MAY A LSO CAUSE MILD SKIN IRRITATION, RESPIRATORY
    IRRITATION, EYE IRRITATION, SILICOSIS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
    FLUSH UNDER LIDS BY LIFTING THEM OR ROLLING EYES. SEE DOCTOR ASAP.
    SKIN: FLUSH WITH WATER. REMOVE CLOTHING AND CONTINUE FLUSHING.
    INHALATION : REMOVE TO FRESH AIR AND RESTORE BREATHING. GET MEDICAL
    HELP. INGESTION: DO NOT INDUCE VOMITING. DILUTE. GET PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>500F,>260C
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:NONFLAMMABLE. USE EXTINGUISHING MEDIA SUITABLE FOR
    SURROUNDING FIRE.
Fire Fighting Procedures:WEAR PROTECTIVE CLOTHING AND NIOSH-APPROVED
    SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN AN INERT MATERIAL
    AND PUT IN A CONTAINER FOR DISPOSAL. WASH SPILL AREA WITH DETERGENT
    AND WATER TO REDUCE SLIPPING HAZARD.
Neutralizing Agent:NOT RELEVANT

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN DRY PLACE AWAY FROM EXCESSIVE
    HEAT AND FLAMES.
Other Precautions:DO NOT RAISE DUST. AVOID CONTACT WITH EYES, SKIN OR
    CLOTHING. AVOID INHALATION OF DUST. WASH THOROUGHLY AFTER HANDLING
    MATERIAL. KEEP OUT OF REACH OF SMALL CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY REQUIRED. IF AIRBORNE
    CONCENTRATION IS HIGH, WEAR A NIOSH-APPROVED DUST RESPIRATOR OR
    DUST MASK.
Ventilation:ADEQUATE
Protective Gloves:CLOTH
Eye Protection:SAFETY GOGGLES/GLASSES
Other Protective Equipment:EYE WASH STATION, SAFETY SHOWER, PROTECTIVE
    CLOTHING AND/OR UNIFORM
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
    RECOMMENDED PROCEDURES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:V7
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Decomp Temp:Decomp Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:1.035
Viscosity:NOT RELEVANT
Evaporation Rate & Reference:<1 (N-BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:GREY SOLID - SLIGHT ODOR
Percent Volatiles by Volume:<1

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:TEMPERATURES ABOVE 300F (149C)
Hazardous Decomposition Products:SILICONE DIOXIDE, FORMALDEHYDE, CARBON
    DIOXIDE, CARBON MONOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE
    AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***