=====================  Product Identification  =====================

MSDS NAME:LEAD SHOT
NIIN:00-312-6640
MSDS Number: CBRYX
=== Responsible Party ===
Company:BELMONT METALS INC
Address:330 BELMONT AVENUE
City:BROOKLYN
State:NY
ZIP:11207
Country:US
Info Phone Num:718-342-4900
Emergency Phone Num:718-342-4900
CAGE:70774
=== Contractor Identification ===
Company:BELMONT METALS INC
Address:330 BELMONT AVE
Box:City:BROOKLYN
State:NY
ZIP:11207
Phone:718-342-4900
CAGE:70774

=============  Composition/Information on Ingredients  =============

Name:LEAD (SARA 313) (CERCLA)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 99% %
Other REC Limits:NONE RECOMMENDED
OSHA PEL:SEE 1910.1025
ACGIH TLV:0.05MG/M3, A3; 9596
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NOT GIVEN FOR PRODUCT AS A WHOLE
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:LEAD INTOXICATION MAY RESULT FROM
    CHRONIC HIGH LEAD EXPOSURES WITH SYMPTOMS OF ANEMIA, INSOMNIA,
    WEAKNESS, CONSTIPATION AND GASTROINTESTINAL DISORDERS. INGESTION OF
    LEAD MAY LEAD TO INTOXICATION WITH	ACCOMPANYING SYMPTOMS OF NAUSEA
    AND ABDOMINAL PAIN. MAY CAUSE EYE IRRITATION/SKIN IRRITATION.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
    CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
    CARCINOGENS.
Effects of Overexposure:EYE IRRITATION, SKIN IRRITATION, ANEMIA,
    INSOMNIA, WEAKNESS, CONSTIPATION, GI DISTURBANCES, NAUSEA,
    ABDOMINAL PAIN, DISEASES OF THE BLOOD AND BLOOD FORMING ORGANS,
    KIDNEYS, NERVOUS AND POSSIBLY REPROD UCTIVE SYSTEMS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
    OPEN. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
    WASH WITH SOAP AND WATER. IF IRRITATION PERSIST, GET MEDICAL
    ATTENTION. INH ALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. GET
    MEDICAL ATTENTION. INGESTION: GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:DRY CHEMICAL OR CARBON DIOXIDE SHOULD BE USED ON
    SURROUNDING FIRE. DO NOT USE WATER ON FIRES WHERE MOLTEN METAL IS.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF CONTAINED
    BREATHING APPARATUS AND FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:MOLTEN METALS PRODUCE FUME, VAPOR AND/OR
    DUST THAT MAY BE TOXIC AND/OR RESPIRATORY IRRITANTS. WILL REACT
    WITH STRONG OXIDIZERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DUST MATERIAL SHOULD BE VACUUMED OR WET SWEPT
    WHERE VACUUMING IS NOT FEASIBLE. PARTICULATE MATTER SHOULD BE
    STORED IN DRY CONTAINERS FOR LATER DISPOSAL. DO NOT USE COMPRESSED
    AIR OR DRY SWEEPING AS A  MEANS OF CLEANING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF EXPOSURE MAY OR DOES EXCEED OCCUPATION
    EXPOSURE LIMITS USE A NIOSH-APPROVED RESPIRATOR TO PREVENT
    OVEREXPOSURE. IN ACCORD WITH 29 CFR 1910.134 USE EITHER AN
    ATMOSPHERE-SUPPLYING RESPIRATOR OR AN AI R-PURIFYING RESPIRATOR.
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) VENTILATION AS
    REQUIRED TO MAINTAIN EXPOSURE LEVELS.
Protective Gloves:RECOMMENDED
Eye Protection:FACE SHIELD OR VENTED GOGGLES
Other Protective Equipment:CHEMICAL RESISTANT CLOTHING AS NECESSARY TO
    PREVENT SKIN CONTACT. AN EMERGENCY EYEWASH AND SHOWER SHOULD BE
    AVAILABLE.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
    BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
LAUNDER CLOTHING AFTER USE.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:621F,327C
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:11.34
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVERY GRAY METALLIC SOLID, NO ODOR
Percent Volatiles by Volume:NIL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HYDROGEN GAS, HEAVY METAL FUME, VAPOR
    AND/OR DUST.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
    ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
    LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***