===================== Product Identification =====================
MSDS NAME:F-150, NEUTRAL, COMP B, TYPE I, 850C0903
NIIN:00N017699
MSDS Number: CBVRK
=== Responsible Party ===
Company:DEVOE COATINGS CO
Address:4000 DUPONT CIRCLE
City:LOUISVILLE
State:KY
ZIP:40207
Country:US
Info Phone Num:502-897-9861
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:1HK86
=== Contractor Identification ===
Company:DEVOE COATINGS CO
Address:4000 DUPONT CIRCLE
Box:7600
City:LOUISVILLE
State:KY
ZIP:40207-4802
Country:US
Phone:502-897-9861
CAGE:1HK86
============= Composition/Information on Ingredients =============
Name:VENT: HLTH STDS IN MIXING, APPLICATION & CURING AREAS & TO
REMOVE SANDING DUSTS OF DRIED COATINGS & DECOMP (ING 17)
RTECS #:9999999ZZ
Name:ING 16: PRODS DURING WELDING & FLAME CUTTING ON SURF COATED
W/THIS PROD. VAPS MAY SPREAD LONG DIST. PREVENT (ING 18)
RTECS #:9999999ZZ
Name:ING 17: BUILD-UP BY REMOVING HEAVY SOLVENT VAPORS FROM
LOWER LEVELS OF THE WORK AREA. ELIMINATE ALL IGNITION SOURCES.
RTECS #:9999999ZZ
Name:DIATOMACEOUS EARTH, FLUX-CALCINED; (CRYSTALLINE SILICA
(PC))
CAS:68855-54-9
Fraction by Wt: 15%
OSHA PEL:0.1 MG/M3 (MFR)
ACGIH TLV:0.1 MG/M3 (MFR)
Name:BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (EPOXY RESIN) LD50
(ORAL RAT): > 5000 MG/KG
CAS:25068-38-6
RTECS #:SL6475000
Fraction by Wt: 50%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (HIGH FLASH
AROMATIC NAPHTHA) VP: 2.7
CAS:64742-95-6
RTECS #:WF3400000
Fraction by Wt: 25%
OSHA PEL:N/K
ACGIH TLV:100 PPM (MFR)
Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM
SILICATE)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 10%
OSHA PEL:20 MPPCF Z-3
ACGIH TLV:2 MG/M3 RDUST
Name:VOLATILE ORGANIC CONTENT: 316.62 G/L
RTECS #:9999999VO
OSHA PEL:N/K
ACGIH TLV:N/K
Name:SUP DAT: APPARENT. OBTAIN MEDICAL ATTENTION.
RTECS #:9999999ZZ
Name:FIRST AID PROC: INGEST: CONSULT MD IMMED. DO NOT INDUCE
VOMIT. ASPIR OF VOMITUS CAN CAUSE CHEM PNEUMIT WHICH CAN (ING 8)
RTECS #:9999999ZZ
Name:ING 7: BE FATAL. NOTICE: INTENTIONAL MISUSE BY DELIBERATELY
CONC & INHALING CONTENTS MAY BE HARMFUL/FATAL.
RTECS #:9999999ZZ
Name:SPILL PROC: ABSORBENT AND NON-SPARKING TOOLS. STORE IN
CLOSED CONTAINER UNTIL PROPERLY DISPOSED OF.
RTECS #:9999999ZZ
Name:OTHER PREC: IS PART OF A 2 COMPONENT PROD, THEN MIXTURE OF
BASE & CONVERTER PORTIONS WILL HAVE HAZARDS OF BOTH (ING 11)
RTECS #:9999999ZZ
Name:ING 10: COMPONENTS. OBSERVE ALL APPLIC PREC. WARNING: THIS
PRODUCT MAY CONTAIN A CHEMICAL KNOWN TO THE STATE (ING 12)
RTECS #:9999999ZZ
Name:ING 11: OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, OR
OTHER REPRODUCTIVE HARM (CALIFORNIA PROPOSITION 65).
RTECS #:9999999ZZ
Name:RESP PROT: WHEN USED IN RESTRICTED VENT AREAS, WEAR
NIOSH/MSHA APPRVD CHEM-MECH FILTER DESIGNED TO REMOVE A (ING 14)
RTECS #:9999999ZZ
Name:ING 13: COMBINATION OF PARTICULATES & VAP. WHEN USED IN
CONFINED AREAS, WEAR NIOSH/MSHA APPRVD AIR SUPPLY RESPS (ING 15)
RTECS #:9999999ZZ
Name:ING 14: OR USE HOODS. USE NIOSH/MSHA APPRVD RESP WHEN FLAME
CUTTING, WELDING, BRAZING & SANDING MATL COATED W/THIS PROD.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:SEE INGREDIENT 2.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: IRRIT OF RESP TRACT;
HDCH, NAUS, DIZZ, WEAK & FATG. EXTREME EXPOS CAN RSLT IN UNCON &
EVEN RESP ARREST. SKIN/EYES: IRRIT. MAY BE HARMFUL IF ABSORBED THRU
SKIN. INGEST: CAN CAUSE STOM &/I NTESTINAL IRRIT, NAUS, VOMIT &
DIARR. CHRONIC: RPTS HAVE ASSOC RPTD & PRLNG OCCUP OVEREXP TO
SOLVENTS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: W/PERM BRAIN & NERV SYS DMG.
PRLNG/RPTD BRTHG OF SPRAY MIST &/SANDING DUST OVER A PERIOD OF
YEARS MAY CAUSE DUST DISEASE OF THE LUNGS. SILICA IS LISTED W/IARC
AS A CLASS 2A CARCIN. CONTAINS CRYSTALLINE SILICA WHICH CAN CAUSE
LUNGDAMAGE AND CANCER. RISK DEPENDS ON DURATION & LEVEL OF
EXPOSURE.
Medical Cond Aggravated by Exposure:NONE, WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION.
======================= First Aid Measures =======================
First Aid:INHAL: IF YOU EXPERIENCE DFCLTY IN BRTHG, LEAVE AREA TO
OBTAIN FRESH AIR. IF CONTINUED DFCLTY IS EXPERIENCED, SUMMON MED
ASSIST IMMED. IF BRTHG CEASES, RESTORE USING APPRVD CPR TECHNIQUES
& SUMMON MED HELP IMMED. EYES: FLUSH IMMED W/LGE AMTS OF WATER FOR
AT LEAST 15 MIN. GET MED ASSIST. SKIN: WASH AFFECTED AREAS W/SOAP &
WATER. REMOVE SOILED CLTHG. GET MED ASSIST IF IRRIT PERSISTS. (ING
7)
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:115F,46C
Lower Limits:0.5%
Extinguishing Media:USE CARBON DIOXIDE, DRY CHEMICAL, FOAM, OR OTHER
NFPA APPROVED METHOD FOR TREATING A CLASS B FIRE.
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
SUMMON PROFESSIONAL FIREFIGHTERS. WATER SPRAY MAY BE INEFFECTIVE.
IF WATER IS USED, FOG NOZZ PREF. (SUP DAT)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS & FLAME. DUE TO PRESS BUILD-UP, CLSD
CONTRS EXPOSED TO EXTREME HEAT MAY EXPLODE. NEVER (SUP DAT)
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT (FLAMES, HOT SURF,
& ELEC, STATIC/FRICTIONAL SPARKS). PVNT BRTHG OF VAPS. VENT AREA.
BEFORE ATTEMPTING CLEAN-UP, REFER TO HAZ CAUTION INFO IN OTHER
SECTIONS OF THIS MSDS. C ONTAIN SPILLED MATL & REMOVE W/INERT (ING
9)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & FLAMES.
DO NOT SMOKE. PVNT BUILD-UP OF VAPS BY MAINTAINING CONTINUOUS FLOW
OF FRESH AIR.
Other Precautions:DO NOT STORE ABOVE 120F/NEAR FIRE/OPEN FLAME. STORE
LGE QTYS IN BLDGS TO COMPLY W/OSHA 1910.106. KEEP CONTRS CLSD WHEN
NOT IN USE. DO NOT TRANSFER CONTENTS TO BOTTLES/OTHER UNLABELLED
CONTRS. DO NOT R EUSE EMPTY CONTRS. IF THIS MATL (ING 10)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:DO NOT BREATHE VAPS, SPRAY MIST/SANDING DUST.
WHEN SPRAY APPLIED IN OUTDOOR/OPEN AREAS, & CURING SANDING/GRINDING
OPERATIONS, USE NIOSH/MSHA APPRVD MECH FILTER RESP TO REMOVE SOLID
AIRBORNE PARTICLES OF OVERSPRAY & SANDING DUST. (ING 13)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP AIR CONTAMINANT CONC BELOW CURRENT APPLIC SFTY & (ING 16)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
SOLV IMPERMEABLE CLTHG & BOOTS TO PREVENT SKIN CONT ARE
RECOMMENDED.
Work Hygienic Practices:DO NOT GET ON SKIN/IN EYES. REMOVE & WASH
SOILED CLTHG BEFORE REUSE. WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: IF EXPOSED TO FIRE/EXTREME HEAT, WATER SHOULD BE USED
TO COOL CLSD CONTRS & PVNT PRESS BUILD UP/POSS AUTO-IGNIT. EXPLO
HAZ: USE WELDING/CUTTING TORCH ON/NEAR CONTR (EVEN EMPTY) AS PRO
D/ITS RESIDUE MAY IGNITE. DURING EMER CNDTNS OVEREXP TO DECOMP
PRODS MAY CAUSE HLTH HAZ. SYMPS MAY NOT BE IMMED (ING 6)
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:313F,156C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER
Percent Volatiles by Volume:36.31
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE TOXIC FUMES WHEN HEATED TO
DECOMPOSITION. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON DIOXIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|