=====================  Product Identification  =====================

MSDS NAME:CLEAR COAT 4-2-1, EPOXY RESIN
NIIN:00N066964
Kit Part:Y
MSDS Number: CBWKG
=== Responsible Party ===
Company:CLEAR COAT CORP
Address:2424 22ND ST NO
City:ST PETERSBURG
State:FL
ZIP:33713
Country:US
Info Phone Num:813-822-4677
Emergency Phone Num:813-822-4677
CAGE:CLCOA
=== Contractor Identification ===
Company:CLEAR COAT CORP
Address:2424 22ND STREET NO
Box:City:ST PETERSBURG
State:FL
ZIP:33713
Country:US
Phone:813-822-4677
CAGE:CLCOA
Company:CLEAR COTE CORP
Address:4242 31ST STREET NORTH
Box:City:ST PETERSBURG
State:FL
ZIP:33174
Country:US
Phone:813-823-6230
CAGE:0WTR8

=============  Composition/Information on Ingredients  =============

Name:BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (BISPHENOL A
    DIGLYCIDYL ETHER RESIN)
CAS:25068-38-6
RTECS #:SL6475000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:SUPDAT:EARTH, FLOOR ABSORBENT, OR OTHER ABSORBENT MATERIAL
    AND SHOVELED INTO CONTAINERS.
RTECS #:9999999ZZ

Name:RESP PROT:PERMIT OTHER NIOSH/MSHA APPRVD RESPIRATORS UNDER
    SPECIFIED CNDTNS. (SEE YOUR SFTY EQUIP SUPPLIER).
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN:PROLONGED OR REPEATED
    CONTACT CAN CAUSE MODERATE IRRITATION, DEFATTING, DERMATITIS.
    INHALATION:EXCESSIVE INHALATION OF VAPORS CAN CAUSE NASAL AND
    RESPIRATORY IRRITATION, DIZZINESS, WEAKNESS , FATIGUE, NAUSEA,
    HEADACHE, POSSIBLE UNCONSCIOUSNESS, AND EVEN ASPHYXIATION.
    INGESTION:CAN CAUSE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:GASTROINTESTINAL IRRITATION, NAUSEA,
    VOMITING, AND DIARRHEA. CHRONIC:NOTICE:REPORTS HAVE ASSOCIATED
    REPEATED & PROLONGED OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN
    & NERVOUS SYSTEM DAMAGE.  INTENTIONAL MISUSE BY DELIBERATELY
    CONCENTRATING & INHALING THE CONTENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN:THORO WASH EXPOS AREA W/SOAP & WATER. REMOVE CONTAMD
    CLTHG. LAUNDER CONTAMD CLTHG BEFORE REUSE. EYES:FLUSH W/LG AMTS OF
    WATER FOR @ LEAST 15 MINS, LIFTING UPPER & LOWER LIDS OCCASNLY, GET
    MED ATT N. INGEST:DO NOT INDUCE VOMIT. CALL PHYS/TRANSPORT TO AN
    EMER FACILITY. INHAL:IF AFFECTED, REMOVE INDIVIDUAL TO FRESH AIR.
    IF BRTHG IS DFCLT, ADMIN OXYG. IF BRTHG HAS STOPPED GIVE ARTF RESP.
    (SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:490F,254C
Extinguishing Media:WATER FOG OR CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:VAP ARE HVR/AIR & MAY TRAVEL ALONG
    GROUND/MAY BE MOVED BY VENT & IGNITED BY PILOT LIGHTS, OTHER
    FLAMES, SPKS, HEATERS, SMKNG, ELEC MOTORS/OTHER IGNIT (SUPDAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIM ALL IGNIT SOURCES (FLARES, FLAMES INCLDG
    PILOT LIGHTS, ELEC SPKS). PERSONS NOT WEARING PROT EQUIP SHOULD BE
    EXCLUDED FROM AREA OF SPILL UNTIL CLEAN-UP HAS BEEN COMPLETED. STOP
    SPILL AT SOURCE, DI KE AREA OF SPILL TO PVNT SPREADING, PUMP
    (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:CONTAINERS OF THIS MATERIAL MAY BE
    HAZARDOUS WHEN EMPTIED.
Other Precautions:SINCE EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES
    (VAPOR, LIQUID, AND/OR SOLID), ALL HAZARD PRECAUTIONS GIVEN IN THIS
    MSDS MUST BE OBSERVED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD RESP APPROP FOR EXPOS OF
    CONCERN . IF TLV OF PROD/ANY COMPONENT IS EXCEEDED, NIOSH/MSHA
    JOINTLY APPRVD SCBA W/FULL FACE PIECE OPERATED IN PRESS
    DEMAND/OTHER POS PRESS MODE IS A DVISED: HOWEVER, OSHA REGS ALSO
    (ING 3)
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GEN) AND/OR LOC EXHAUST VENT
    TO MAINTAIN EXPOS BELOW TLV(S).
Protective Gloves:RESISTANT IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:IMPERVIOUS CLOTHING AND BOOTS. ANSI APPRVD
    EMERGENCY EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:SOURCES @ LOCATIONS DISTANT FROM MATL HNDLG POINT. NEVER USE
    WELDING/CUTTING TORCH ON OR NEAR DRUM (EVEN EMPTY) BECAUSE PROD
    (EVEN DUST RESIDUE) CAN IGNITE EXPLOSIVELY. FIRST AID PROC:KEEP P
    ERSON WARM, QUIET & GET MED ATTN. SPILLPROC:LIQ TO SALVAGE TANK.
    REMAINING LIQ MAY BE TAKEN UP ON SAND, CLAY, (ING 2)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:392F,200C
Vapor Density:HVR/AIR
Spec Gravity:1.17 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT KNOWN
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:NIL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENT, STRONG ALKALIES, STRONG MINERAL ACIDS.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS:CARBON
    DIOXIDE AND CARBON MONOXIDE, VARIOUS HYDROCARBONS, ETC.

====================  Disposal Considerations  ====================

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
    DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE WITH
    LOCAL, STATE, AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***