=====================  Product Identification  =====================

MSDS NAME:HMP 85-1/SPLICING AND POTTING COMPOUND PART A, 31752
NIIN:00N067112
Kit Part:Y
MSDS Number: CBWMV
=== Responsible Party ===
Company:FLUID POLYMERS INC
Address:3950 WEST PONDEROSA, BLDG 3
City:LAS VEGAS
State:NV
ZIP:89118
Country:US
Info Phone Num:702-896-6165
Emergency Phone Num:702-795-0660
CAGE:31752
=== Contractor Identification ===
Company:FLUID POLYMERS INC
Address:3950 WEST PONDEROSA, BLDG 3
Box:City:LOS VEGAS
State:NV
ZIP:89118
Country:US
Phone:702-896-6165
CAGE:31752

=============  Composition/Information on Ingredients  =============

Name:PARAFFIN WAXES AND HYDROCARBON WAXES, CHLORINATED;
    (CHLORINATED PARAFFIN)
CAS:63449-39-8
RTECS #:RV0450000
Fraction by Wt: 1.5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:IRON SALTS; (IRON, POTASSIUM OCTOATE)
CAS:3645-16-7
Fraction by Wt: 2.0%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:POLYETHER POLYOLS
CAS:85763-67-5
Fraction by Wt: 74.5%
OSHA PEL:34.6G PPM (MFR)
ACGIH TLV:N/K 

Name:STODDARD SOLVENT; (ALIPHATIC OXIRANE)
CAS:8052-41-3
RTECS #:WJ8925000
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Name:TRIMETHYLENE GLYCOL DI-PARA-AMINOBENZOATE; (TRIMETHYLENE
    GLYCOL DI-P-AMINOBENZOATE) LD50:5000 MG/KG
CAS:57609-64-0
Fraction by Wt: 17.6%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:THERE IS NO SPECIFIC ANTIDOTE.
    TREATMENT OF OVEREXPOSURE SHOULD BE DIRECTED AT THE CONTROL OF
    SYMPTOMS AND THE CLINICAL CONDITION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGESTION:CALL MD IMMEDIATELY . SKIN:WASH WITH SOAP AND
    WATER. EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
    INHALATION:REMOVE TO FRESH AIR.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:465F,241C
Extinguishing Media:ALCOHOL-TYPE/ALL PURPOSE-TYPE FOAMS APPLIED BY
    MFRS' RECD TECHNIQUES FOR LARGER FIRES. CARBON DIOXIDE/DRY CHEM
    (SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
    . DO NOT SPRAY SOLID SPRAY OF WATER/FOAM DIRECTLY INTO POOL OF HOT,
    BURNING LIQ, THIS MAY CAUSE FROTHING.
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL SPILLS CAN BE FLUSHED WITH LARGE AMOUNTS
    OF WATER. LARGER SPILLS SHOULD BE COLLECTED FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NORMAL PRECAUTIONS COMMON TO GOOD
    MANUFACTURING PRACTICE SHOULD BE FOLLOWED IN HANDLING AND STORAGE.
Other Precautions:THIS PRODUCT IS NOT CONSIDERED HAZARDOUS UNDER 29 CFR
    1910.1200.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
    FOR EXPOSURE OF CONCERN . NONE REQURED FOR USE AT LOW TEMPERATURES.
Ventilation:GEN (MECH) ROOM VENT IS SATISFACTORY FOR USE @ LOW TEMPS.
    IF USED @ HIGH TEMPS, SPECIAL LOC VENT IS REC @ POINTS(SUPDAT)
Protective Gloves:PVC-COATED.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA:FOR SMALL FIRES. MATLS TO AVOID:HYDROXYL COMPOUNDS.
    VENT:WHERE VAPORS CAN BE EXPECTED TO ESCAPE TO THE WORKPLACE AIR.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:<400F,<204C
Spec Gravity:1.04
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:<1

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NORMAL UNREACTIVE; HOWEVER, AVOID STRONG BASES @ HIGH TEMPS, STRONG
    ACIDS & OXIDIZING AGENTS & MATLS REACTIVE W/(SUPDAT)
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:BURNING CAN PRODUCE CARBON MONOXIDE
    AND/OR CARBON DIOXIDE. ALSO, SEE HEALTH HAZARDS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN A FURNACE WHERE PERMITTED UNDER
    APPROPRIATE FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***