=====================  Product Identification  =====================

MSDS NAME:LR WHITE ACCELERATOR, 17413
NIIN:00N067086
Kit Part:Y
MSDS Number: CBWLY
=== Responsible Party ===
Company:POLYSCIENCES INC
Address:400 VALLEY RD
City:WARRINGTON
State:PA
ZIP:18976
Country:US
Info Phone Num:215-343-6484
Emergency Phone Num:215-343-6484
CAGE:9C365
=== Contractor Identification ===
Company:POLYSCIENCES INC
Address:400 VALLEY RD
Box:City:WARRINGTON
State:PA
ZIP:18976
Country:US
Phone:215-343-6484
CAGE:32939
Company:POLYSCIENCES INC
Address:PAUL VALLEY INDUSTRIAL PARK
City:WARRINGTON
State:PA
ZIP:18976
Country:US
Phone:215-313-6484
CAGE:9C365

=============  Composition/Information on Ingredients  =============

Name:POLYETHYLENE GLYCOL
CAS:25322-68-3
RTECS #:TQ3500000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:P-TOLUIDINE, N,N-DIMETHYL-; (N,N-DIMETHYL-P-TOLUIDINE)
CAS:99-97-8
RTECS #:XU5803000
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:IRRITANT. ACUTE:MAYBE HARMFUL BY
    INHALATION, INGESTION OR SKIN ABSORPTION. VAPOR OR MIST IS
    IRRITATING TO THE EYES, MUCOUS MEMBRANES AND UPPER RESPIRATORY
    TRACT. CHRONIC:NONE LISTED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST:CALL MD IMMEDIATELY . EYES/SKIN:IMMED FLUSH W/COPIOUS
    AMTS OF WATER FOR @ LEAST 15 MINS WHILE REMOVING CONTAMD CLTHG &
    SHOES. ASSURE ADEQUATE FLUSHING OF THE EYES BY SEPARATING THE
    EYELID S WITH FINGERS. INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG GIVE
    ARTF RESP. IF BRTHG IS DFCLT, GIVE OXYG. CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL, FOAMS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL IS COMBUSTIBLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB ON SAND OR VERMICULITE AND PLACE IN A
    CLOSED CONTAINER FOR DISPOSAL. EVACUATE THE AREA. VENTILATE AREA
    AND WASH SPILL SITE AFTER MATERIAL PICKUP IS COMPLETE. WEAR
    NIOSH/MSHA APPRVD SCBA, RUBBER  BOOTS, AND HEAVY RUBBER GLOVES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT BREATHE VAPOR. AVOID CONTACT
    WITH EYES, SKIN & CLTHG. AVOID PROLONGED OR REPEATED EXPOSURES.
    KEEP AWAY FROM HEAT AND OPEN FLAME.
Other Precautions:STORE IN A COOL DRY PLACE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST:FUME HOOD.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
    SHOWER .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
WASTE DISP METH:TOXIC WASTE. DISPOSAL MUST BE I/A/W FEDERAL, STATE AND
    LOCAL REGULATIONS .

==================  Physical/Chemical Properties  ==================

Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:NOT KNOWN
Appearance and Odor:LIQUID.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NOT KNOWN.
Stability Condition to Avoid:HEAT.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
    CARBON MONOXIDE, CARBON DIOXIDE, AND NITROGEN OXIDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:COMBINE THE ACCELERATOR WITH LR WHITE RESIN
    (CAT. 17411) IN WELL VENTILATED CNTNR SUCH AS A BUCKET. THE RESIN
    WILL CURE W/LITTLE FUMING. PLACE IT IN FUME HOOD/OUTSIDE UNTIL
    COMPLETE. THE COOL RESIN IS  HARMLESS & MAY BE DISPOSED OF WITH
    NON- (SUPDAT)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***