=====================  Product Identification  =====================

MSDS NAME:ARMOREX, 1498
NIIN:00N067017
MSDS Number: CBWLD
=== Responsible Party ===
Company:ATCO INTERNATIONAL
Address:1401 BARCLAY CIRCLE
City:MARIETTA
State:GA
ZIP:30060
Country:US
Info Phone Num:404-424-7550
Emergency Phone Num:800-535-5053
Preparer's Name:FJ SPAETH
CAGE:IO570
=== Contractor Identification ===
Company:ATCO INTERNATIONAL
Address:1401 BARCLAY CIRCLE
Box:City:MARIETTA
State:GA
ZIP:30060
Country:US
Phone:404-424-7550
CAGE:IO570
Company:ATCO MANUFACTURING CO
Address:1400 BARCLAY CIRCLE
Box:City:MARIETTA
State:GA
ZIP:30060
Country:US
Phone:404-424-7550
CAGE:3Y648

=============  Composition/Information on Ingredients  =============

Name:NON-HAZARDOUS INGREDIENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION/SKIN CONTACT/EYE
    CONTACT:ESSENTIALLY NON IRRITATING. SKIN ABSORPTION:NO EVIDENCE OF
    ADVERSE EFFECTS FROM AVAILABLE INFORMATION. INGESTION:SEEK MEDICAL
    ATTENTION FOR SILICONE INGESTION . CHRONIC:NO EVIDENCE OF ADVERSE
    EFFECTS FROM AVAILABLE INFORMATION. ADDNL TOX INFO:NO ADDNL INFO
    AVAIL.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO EVIDENCE OF ADVERSE EFFECTS FROM
    AVAILABLE INFORMATION.

=======================  First Aid Measures  =======================

First Aid:INHALATION:REMOVE TO FRESH AIR. EYE CONTACT:IN CASE OF
    CONTACT, IMMEDIATELY FLUSH EYES WITH COPIOUS AMOUNTS OF WATER FOR
    AT LEAST 15 MINUTES. SKIN CONTACT:IN CASE OF CONTACT, IMMEDIATELY
    FLUSH SKIN WI TH SOAP AND WATER. INGESTION:IF SWALLOWED, CONSULT A
    PHYSICIAN. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.

=====================  Fire Fighting Measures  =====================

Flash Point:>212F,>100C
Extinguishing Media:CARBON DIOXIDE, DRY CHEM, FOAM, & VAPORIZING LIQ
    TYPE EXTING HAVE ALL BEEN FOUND SUITABLE FOR USE ON FLAM LIQ (SUP
    DAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
    . IF WATER IS USED, FOG NOZZS ARE PREF. WATER MAY BE USED TO COOL
    CLSD CNTNRS IN ORDER TO PVNT PRESS(SUPDAT)
Unusual Fire/Explosion Hazard:NONE. HOWEVER, CONTAINERS MAY BURST
    EXPLOSIVELY IF OVER HEATED IN FIRE. COOL CONTAINERS WITH WATER
    SPRAY OR FOG.

==================  Accidental Release Measures  ==================

Spill Release Procedures:STOP SOURCE OF SPILL. ABSORB WITH INERT
    ABSORBENT MATERIAL AND DISPOSE OF IN A MANNER CONSISTANT WITH
    APPLICABLE REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. KEEP CLOSURE
    TIGHT AND CONTAINER UPRIGHT TO PREVENT LEAKAGE. STORE DRUM OUT OF
    SUNLIGHT AND AWAY FROM HEAT, SPARKS OR FLAME.
Other Precautions:STORE ONLY IN WELL-VENTILATED AREAS. FOLLOW ALL LABEL
    INSTRUCTIONS. KEEP OUT OF REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
    FOR EXPOSURE OF CONCERN . NONE REQUIRED IN EXCESS OF NORMAL
    VENTILATION.
Ventilation:LOCAL MECHANICAL EXHAUST TO PROVIDE NORMAL VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES RECOMMENDED.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
EXTING MEDIA:FIRES OF MOD SIZE. WATER SPRAY (FOG) IS PARTICULARLY
    EFTIVE ON FIRES IN FLAM LIQS & VOLAT SOLIDS HAVING FL PTS ABOVE
    100F; BUT W/LIQS HAVING FL PTS ABOVE 212F, FROTHING MAY OCCUR. FIRE
    FI GHT PROC:BUILD UP WHICH MAY RSLT IN EXPLO. WASTE DISP
    METH:APPROP REGULATORY AFFAIRS OFFICER FOR INFO ON PROPER DISP.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F,>100C
Vapor Density:>1
Spec Gravity:1.01
Evaporation Rate & Reference:<1 (BUTYL ETHER=1)
Solubility in Water:READILY
Appearance and Odor:MILKY WHITE LIQUID WITH A CHARACTERISTIC ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:NONE KNOWN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISP OF IN ACCORD W/APPLIC FED, STATE & LOC
    REGS. UNDER RESOURCE CONSERVATION & RECOVERY ACT (RCRA) REGS, IT IS
    RESPONSIBILITY OF PROD USER TO DETERM, AT TIME OF DISP, WHETHER
    MATL SHOULD BE CLASSIFIE D AS HAZ WASTE. CONSULT YOUR ATTORNEY OR
    (SUPDAT)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***