=====================  Product Identification  =====================

MSDS NAME:RP-6B ADHESIVE HARDENER
NIIN:00N068895
Kit Part:Y
MSDS Number: CBXCP
=== Responsible Party ===
Company:AMERON INC
Address:1004 AMERON RD
City:BUCKBURNETT
State:TX
ZIP:76354
Country:US
Info Phone Num:713-698-7777
Emergency Phone Num:817-569-1471
CAGE:AMERN
=== Contractor Identification ===
Company:AMERON INC
Address:1004 AMERON RD
Box:City:BUCKBURNETT
State:TX
ZIP:76354
Country:US
Phone:713-698-7777
CAGE:AMERN

=============  Composition/Information on Ingredients  =============

Name:M-PHENYLENEDIAMINE; (1,3-BENZENEDIAMINE)
CAS:108-45-2
RTECS #:SS7700000
Fraction by Wt: <10%
OSHA PEL:N/K 
ACGIH TLV:0.1 MG/M3

Name:DIETHYLENETRIAMINE
CAS:111-40-0
RTECS #:IE1225000
Fraction by Wt: <12%
OSHA PEL:1 PPM
ACGIH TLV:1 PPM, S

Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: <2%
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3

Name:AMORPHOUS SILICON DIOXIDE
CAS:61790-53-2
Fraction by Wt: <2%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:SILICON DIOXIDE CRYSTAL (SAND)
Fraction by Wt: <75%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGESTION: TOXIC IF INGESTED.
    INHALATION: PROLONGED OR REPEATED BREATHING OF VAPORS CAN CAUSE
    RESPIRATORY IRRITATION. SKIN/EYES: CAN CAUSE CHEMICAL BURNS.
    CHRONIC: SKIN ALLERGIC REACTIONS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. CALL MD.
    SKIN: WASH WITH MILD SOAP AND WATER. GET MEDICAL ATTENTION IF
    IRRITATION OCCURS. INGESTION: GIVE WATER AND INDUCE VOMITING. CALL
    MD. INHALATION : REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION
    OR OXYGEN AS REQUIRED. CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:210F,99C
Extinguishing Media:USE WATER, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCRAPE UP INTO CLOSEABLE CONTAINERS. WASH
    RESIDUE WITH DETERGENT IN WATER. AVOID DISCHARGE INTO SEWERS OR
    WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN CLOSED CONTAINERS AWAY FROM
    HEAT SOURCES.
Other Precautions:AVOID CONTACT WITH EYES, SKIN OR CLOTHING. AVOID
    BREATHING VAPORS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:GOOD VENTILATION IN ORDINATION USE
    CIRCUMSTANCES. USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST IF REQUIRED. MECHANICAL (GENERAL) VENTILATION
    ADEQUATE IN NORMAL USE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (SUP DAT)
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
    EMERGENCY EYEWASH & DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH WITH MILD SOAP AND WATER AFTER USE.
Supplemental Safety and Health
EYE PROT: & FULL LENGTH FACESHIELD .

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:403F,206C
Vapor Pres:<1
Vapor Density:3.5
Spec Gravity:1.3 (H*2O=1)
Solubility in Water:20% @ 140F
Appearance and Odor:SAND FILLED THICK BLACK PASTE, WITH AMINE ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACIDS, OXIDIZING MATERIALS.
Stability Condition to Avoid:MOIST AIR AND HEAT MAY DEGRADE PRODUCT.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
    OXIDES OF CARBON AND OXYGEN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:MAY BE INCINERATED IN COMPLIANCE WITH APPLICABLE
    REGULATIONS. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL
    REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***