===================== Product Identification =====================
MSDS NAME:11404
NIIN:00N068720
MSDS Number: CBXBJ
=== Responsible Party ===
Company:WITCO
Address:1400 S HARRISON
City:OLATHE
State:KS
ZIP:66061
Country:US
Info Phone Num:913-782-5800
Emergency Phone Num:913-782-5800;800-424-9300(CHEMTREC)
Preparer's Name:RAY D LAWSON
CAGE:6Z384
=== Contractor Identification ===
Company:WITCO
Address:29111 MILFORD RD
Box:125
City:NEW HUDSON
State:MI
ZIP:48165
Country:US
Phone:313-437-8161
CAGE:6Z384
Company:WITCO
Box:UNKNOW
CAGE:LATHE
============= Composition/Information on Ingredients =============
Name:PETROLEUM HYDROCARBON PLUS ADDITIVES
OSHA PEL:N/K
ACGIH TLV:N/K
Name:SUPDAT:DEPOSITED INTO THE PALM OF HAND. WITHIN 24-48 HOURS
THE PATIENT MAY EXPERIENCE SWELLING, DISCOLORATION, (ING 3)
RTECS #:9999999ZZ
Name:ING 2:AND THROBBING PAIN IN AFFECTED AREA. IMMED TREATMENT
BY SURGICAL SPECIALIST IS RECOMMENDED.
RTECS #:9999999ZZ
Name:EYE PROT:FULL LENGTH FACESHIELD .
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:NONE LISTED BY MANUFACTURER.
CHRONIC:NONE WHEN USED WITH GOOD PERSONAL HYGIENE PRACTICES. MAY
OTHERWISE CAUSE SKIN AND EYE IRRITATION UPON PROLONGED OR REPEATED
CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
Eyes:IMMED FLUSH W/LG QTYS OF WATER FOR @ LEAST 15 MINS &
CALL PHYS. SKIN:REMOVE EXCESS W/CLOTH OR PAPER & WASH AREA THORO
W/SOAP & WATER. FOR HIGH PRESS INJECTION UNDER SKIN SEE PHYS IMMED.
INHAL:REM OVE EXPOSED PERSON TO FRESH AIR IF DISCOMFORT IS
EXPERIENCED WHILE HNDLG HOT PROD. INGEST:CONT PHYS IMMED. ADVICE TO
PHYS:HIGH VELOCITY INJECTION UNDER SKIN MAY RSLT IN SERIOUS INJURY.
IF LEFT(SUPDAT)
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:>374F,>190C
Extinguishing Media:DRY CHEM/WATER FOG/CO*2/FOAM OR SAND/EARTH. WATER
MAY CAUSE FROTHING. CLSD CNTNRS EXPOSED TO FIRE MAY BE COOLED
W/WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . DENSE SMOKE. DO NOT USE WATER EXCEPT AS FOG.
Unusual Fire/Explosion Hazard:DENSE SMOKE.
================== Accidental Release Measures ==================
Spill Release Procedures:TRANSFER BULK OF MIX INTO ANOTHER CNTNR.
ABSORB RESIDUE W/AN INERT MATL SUCH AS EARTH, SAND, OR VERMICULITE.
SWEEP UP & DISPOSE AS SOLID WASTE I/A/W LOCAL, STATE, AND FEDERAL
REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINER CLOSED UNTIL READY TO
USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE. NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGG & (ING 4)
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:UNTREATED THE AFFECTED AREA IS SUBJECT TO INFECTION,
DISFIGUREMENT, LACK OF BLOOD CIRCULATION & MAY REQUIRE AMPUTATION.
WHEN DISPENSED BY HIGH PRESSURE EQUIPMENT THIS MATERIAL CAN EASIL Y
PENETRATE SKIN AND LEAVE BLOODLESS PUNCTURE WOUND. MATERIAL
INJECTED INTO FINGER CAN BE (ING 3)
================== Physical/Chemical Properties ==================
Spec Gravity:0.978 (H*2O=1)
Solubility in Water:NEGLIGIBLE @ 25C
Appearance and Odor:SEMI-SOLID GREEN GREASE, MINERAL OIL ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS SUCH AS HYDROGEN PEROXIDE, BROMINE, AND CHROMIC ACID.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:KETONES, ALDEHYES, OXIDES OF SULFUR,
OXIDES OF NITROGEN, CARBON MONOXIDE & CARBON DIOXIDE FROM BURNING.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|