=====================  Product Identification  =====================

MSDS NAME:M12-D103 LIGHT GRAY
NIIN:00N068833
MSDS Number: CBXCD
=== Responsible Party ===
Company:PLASTIC FLAMECOAT SYSTEMS INC
Address:3400 WEST 7TH
City:BIG SPRING
State:TX
ZIP:79720
Country:US
Info Phone Num:800-753-5263;915-263-5263
Emergency Phone Num:800-753-5263;915-263-5263
CAGE:FLASY
=== Contractor Identification ===
Company:PLASTIC FLAMECOAT SYSTEMS, INC.
Address:1613 HIGHWAY 3
City:LEAGUE CITY
State:TX
ZIP:77573
Country:US
Phone:713-332-8180
CAGE:FLASY
Company:PLASTIC FLAMECOAT(R) SYSTEMS, INC.
Address:3400 WEST 7TH
Box:City:BIG SPRING
State:TX
ZIP:79720
Country:US
Phone:800-753-5263
CAGE:03FB0

=============  Composition/Information on Ingredients  =============

Name:ETHYLENE METHACRYLIC ACID COPOLYMER (WITH PARTIAL METAL
    SALT)
Fraction by Wt: 0-100%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:METHACRYLIC ACID; (RESIDUAL METHACRYLIC ACID). % (WT):0.05
    MAX.
CAS:79-41-4
RTECS #:OZ2975000
Fraction by Wt: SEE ING
OSHA PEL:S, 20 PPM
ACGIH TLV:20 PPM

Name:SAFETY YELLOW PIGMENT; (LIGHT GRAY PIGMENT)
Fraction by Wt: 0-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:BIS(1-2,2,5,6-PENTAMETHYL-4-PIPERDINYL) SEBACATE; (LIGHT
    STABILIZER)
CAS:52829-07-9
Fraction by Wt: 0-1%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:BENZENEPROPANOIC ACID,
    3,5-BIS(1,1-DIMETHYLETHYL)-4-HYDROXY-,
    2,2-BIS((3-(3,5-BIS(1,1-DIMETHYLETHYL)-4- (ING 6)
CAS:6683-19-8
RTECS #:DA8340900
Fraction by Wt: 0-1%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:ING 5:HYDROXYPHENYL)-1-OXOPROPOXY)METHYL)-1,3- PROPANEDILY
    ESTER; (ANTIOXIDANT/STABILIZER)
RTECS #:9999999ZZ

Name:SILICA, AMORPHOUS (FUMED)
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: <1%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Name:SUPDAT:PROC NEC FOR THEIR REMOVAL". WE SUGGEST PEL (OSHA)
    EXPOS LIMS OF 15 MG/M3, 8 HR, TWA, TOTAL DUST; 5 MG/M3 (ING 9)
RTECS #:9999999ZZ

Name:ING 8:8 HR TWA RESPIRABLE DUST.
RTECS #:9999999ZZ

Name:FIRST AID PROC:SURF OF EYE & EYELIDS. SEEK MED ATTN IF
    IRRIT OCCURS. SKIN:FLUSH ALL AFFECTED AREAS W/PLENTY OF (ING 11)
RTECS #:9999999ZZ

Name:ING 10:WATER FOR SEVERAL MINS. REMOVE & CLEAN ANY CONTAMD
    CLTHG & SHOES. SEEK MED ATTN IF IRRIT OCCURS. INHAL: (ING 12)
RTECS #:9999999ZZ

Name:ING 11:REMOVE TO FRESH AIR. SEEK MED ATTN IF RESP IRRIT
    OCCURS OF IF BRTHG BECOMES DFCLT.
RTECS #:9999999ZZ

Name:WASTE DISP METH:FEDERAL, STATE, PROVINCIAL AND LOCAL
    REGULATIONS.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:MAY CAUSE IRRIT TO
    UPPER RESP TRACT. SKIN:MAY CAUSE IRRIT & ALLERGIC RXN. INGEST:MAY
    CAUSE IRRIT TO GI TRACT. EYE:MAY CAUSE IRRIT. LIGHT GRAY PIGMENT
    SHOULD BE TREATED AS NUISANCE DUS T, PRODUCING NO EVID OF
    PATHOLOGICAL/RESTRICTIVE CHANGES IN LUNG ARCHITECTURE/FUNC.
    NUISANCE DUSTS (EFTS OF OVREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:ARE NOT EXPECTED TO CAUSE SIGNIFICANT
    ORG DISEASE/TOX EFTS WHEN EXPOS ARE CONTROLLED TO LIMS STATED
    BELOW, THE (ACGIH) SUGGEST THAT EXCESS CONC OF NUISANCE
    PARTICULATES IN WORKPLACE "MAY SERI OUSLY REDUCE VISIBILITY, MAY
    CAUSE UNPLEASANT DEPOSITS IN EYES & NASAL PASSAGES/CAUSE INJURY TO
    SKIN/MUC MEMB (SUPDAT)
Medical Cond Aggravated by Exposure:NO MEDICAL CONDITIONS ARE GENERALLY
    KNOWN TO BE AGGRAVATED BY EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:IF ADVERSE RXN OCCURS AFTER EXPOS, PROMPTLY START REC PROC
    BELOW SEEK MED ATTN IF FURTHER TREATMENT IS REQD. INGEST:IF LG AMTS
    OF MATL IS SWALLOWED, GIVE SEVERAL GLASSES OF WATER. CONT MED PERS
    FOR FU RTHER ASSISTANCE. IF UNCON/CONVULSING, DO NOT GIVE ANYTHING
    BY MOUTH. EYES:FLUSH W/PLENTY OF RUNNING WATER FOR @ LEAST 15 MINS.
    HOLD EYELIDS APART DURING FLUSHING TO ENSURE RINSING OF ENTIRE (ING
    10)

=====================  Fire Fighting Measures  =====================

Lower Limits:30 G/M3
Extinguishing Media:WATER, FOAM, CARBON DIOXIDE, DRY CHEMICALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . PRODS OF COMBUST BY BE TOX; AVOID BRTHG FUMES. COOL
    FIRE-EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:DUST CAN FORM EXPLO MIXT W/AIR.
    ELIMINATION OF SOURCES OF IGNIT IS ESSNTL. MATLS ARE NORMALLY
    STABLE & DECOMPOSE ONLY IN EXTREME CASES SUCH AS FIRE, (SUPDAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:SAFEGUARDS(PERS)-NOTE:REVIEW FIREFIGHTING
    MEASURES & HNDLG (PERSONAL) SECTIONS BEFORE PROCEEDING W/CLEANUP.
    USE APPROP PERSONAL PROT EQUIP DURING CLEANUP. ACCIDENTAL RELEASE
    MEASURES-SWEEP UP TO AVOID	SLIPPING HAZARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY PLACE. KEEP
    CONTAINERS CLOSED TO PREVENT CONTAMINATION AND ACCUMULATION OF
    MOISTURE.
Other Precautions:SEE FIRST AID MEASURES AND EXPOSURE CONTROL AND
    PERSONAL PROTECTION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE A NIOSH/MSHA APPROVED RESPIRATOR EQUIPPED
    WITH THE APPROPRIATE FILTER FOR PARTICULATE DUST EXPOSURE.
Ventilation:LOCAL VENTILATION SHOULD BE USED OVER PROCESSING EQUIPMENT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:LONG SLEEVE COTTON SHIRT & LONG PANTS. ANSI
    APPRVD EMER EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:OXIDES OF NITROGEN & CARBON ARE EXPECTED PRODS OF COMBUST IN
    PRESENCE OF LG AMTS OF AIR. PRODS OF POORLY VENTILATED COMBUST ARE
    UNCHARACT MIX OF ORG CMPDS. THIS MIX WILL BE HAZ AS NORM FIRE 
    GASES ASSOC W/POORLY VENTILATED COMBUST. EFTS OF OVEREXP:BY
    CHEM/MECH ACTION PER SE OR BY RIGOROUS SKIN CLEANSING(ING 7)

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:>176F,>80C
Spec Gravity:>0.93
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT GRAY, FINELY DIVIDED POWDER-MILD METHACRYLIC
    ACID ODOR.
Percent Volatiles by Volume:NEGLIG

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:TEMPERATURES ABOVE 325C (617F).
Hazardous Decomposition Products:CARBON MONOXIDE AND HYDROCARBON
    OXIDATION PRODUCTS INCLUDING ORGANIC ACIDS, ALDEHYDES AND ALCOHOLS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PREF OPTIONS FOR DISP ARE (1)RECYCLING, (2)INCIN
    W/ENERGY RECOVERY, & (3)LANDFILL. HIGH FUEL VALUE OF THIS PROD
    MAKES OPTION 2 VERY DESIREABLE FOR MATL THAT CANNOT BE RECYCLED.
    TREATMENT, STOR, TRANSP ORTATION & DISP MUST BE I/A/W APPLIC (ING
    13)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***