=====================  Product Identification  =====================

MSDS NAME:RP-6B ADHESIVE RESIN (ALL KIT SIZES)
NIIN:00N068895
Kit Part:Y
MSDS Number: CBXCN
=== Responsible Party ===
Company:AMERON INC
Address:1004 AMERON RD
City:BUCKBURNETT
State:TX
ZIP:76354
Country:US
Info Phone Num:713-698-7777
Emergency Phone Num:817-569-1471
CAGE:AMERN
=== Contractor Identification ===
Company:AMERON INC
Address:1004 AMERON RD
Box:City:BUCKBURNETT
State:TX
ZIP:76354
Country:US
Phone:713-698-7777
CAGE:AMERN

=============  Composition/Information on Ingredients  =============

Name:BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (BISPHENOL A EPOXY)
    LD50 (ORAL RAT): 10 G/KG
CAS:25068-38-6
RTECS #:SL6475000
Fraction by Wt: <88%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:POLYETHYLENE
CAS:9002-88-4
RTECS #:TQ3325000
Fraction by Wt: <10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:FIBERGLASS (FIBROUS GLASS)
CAS:65997-17-3
Fraction by Wt: <6%
OSHA PEL:5 MG/M3 RESP DUST
ACGIH TLV:10 MG/M3 (<7MICRONS)

Name:SILICON DIOXIDE (AMORPHOUS)
CAS:67762-90-7
Fraction by Wt: <3%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Name:RUTILE; (TITANIUM DIOXIDE)
CAS:1317-80-2
RTECS #:XR2275000
Fraction by Wt: <1%
OSHA PEL:10 MG/M3 TDUST Z1A
ACGIH TLV:10 MG/M3 8990

Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: TRACE
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE INGREDIENT 1.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGESTION: LOW ORDER OF ACUTE
    ORAL TOXICITY. INHALATION: BECAUSE OF LOW VOLATILITY, NOT A LIKELY
    INHALATION HAZARD. SKIN: MODERATELY IRRITATING TO THE SKIN. MAY
    CAUSE SKIN SENSITIZATION. EYES:  MODERATELY IRRITATING TO THE EYES.
    CHRONIC: SKIN AND EYE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN AND EYE DISORDERS
    MAY BE AGGRAVATED BY EXPOSURE.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES. GET
    MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER. IF IRRITATION
    OCCURS, GET MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING.
    GET MED ICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR. PROVIDE
    OXYGEN IF BREATHING IS DIFFICULT. GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:490F,254C
Extinguishing Media:USE CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER
    SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
    BE TOXIC.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP ON ABSORBENT MATERIAL AND REMOVE TO
    WASTE CONTAINERS. AVOID PERSONAL CONTACT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN CLOSED CONTAINERS AWAY FROM
    HEAT SOURCES.
Other Precautions:AVOID CONTACT WITH EYES, SKIN OR CLOTHING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:GOOD GENERAL VENTILATION ADEQUATE IN NORMAL USE
    CONDITIONS. USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST IF REQUIRED. MECHANICAL (GENERAL) VENTILATION
    ADEQUATE IN NORMAL USE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
    EMERGENCY EYEWASH & DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:AFTER USE, WASH WITH MILD SOAP AND WATER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:392F,200C
Vapor Pres:1
Spec Gravity:1.20 (H*2O=1)
Solubility in Water:NIL
Appearance and Odor:THICK GREY PASTE, NO ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:ON COMBUSTION, CARBON MONOXIDE, CARBON
    DIOXIDE, ALDEHYDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN ACCORDANCE WITH APPLICABLE
    REGULATIONS. RESIN REACTED WITH HARDENER TO SOLID IS NON-TOXIC
    WASTE. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL
    REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***