=====================  Product Identification  =====================

MSDS NAME:330 COBALT OXIDE
NIIN:00F051654
MSDS Number: CCFMH
=== Responsible Party ===
Company:FERRO CORP TRANSELCO DIV
Address:RT 14 & PERRY POINT RD
City:DRESDEN
State:NY
ZIP:14441-5000
Country:US
Info Phone Num:315-536-3357
Emergency Phone Num:315-536-3357
CAGE:GO616
=== Contractor Identification ===
Company:FERRO CORP TRANSELCO DIV
Address:RT 14 & PERRY POINT RD
City:DRESDEN
State:NY
ZIP:14441-5000
Country:US
Phone:315-536-3357
CAGE:GO616

=============  Composition/Information on Ingredients  =============

Name:COBALT OXIDE  (IARC GROUP 2B CARCINOGEN) *96-3*
CAS:1308-06-1
RTECS #:GG2500000

Name:COBALT (ANIMAL CARCINOGEN BY IARC - GROUP 2B)     *96-3*
CAS:7440-48-4
RTECS #:GF8750000
Fraction by Wt: 74%
Other REC Limits:0.05 PPM
OSHA PEL:0.1 MG/CUM
ACGIH TLV:0.05 MG/CUM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:INHALATION: CAUSES TRANSIENT/PERMANENT
    RESPIRATORY DISEASE, OCCUPATIONAL ASTHMA & INTERSTITUAL FIBROSIS.
    INTERSTITUAL FIBROSIS CAN LEAD TO PERMANENT DISABILITY/DEATH.
    IRRITATION OF THE RESPIRATORY TRA CT. SKIN: CAN CAUSE
    IRRITATION/ALLERGICREACTION DUE TO COBALT SENSITIZATION.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:ASTHMA, LUNG SCARRING, IRRITATION, COUGH,
    WHEEZING, SHORTNESS OF BREATH, CHEST TIGHTNESS, WEIGHT LOSS.

=======================  First Aid Measures  =======================

First Aid:INGESTION: INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR,
    GIVE OXYGEN IF NECESSARY. EYES/SKIN: WASH THOROUGHLY W/WATER.
    OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:USE SUITABLE EXTINGUISHER FOR ENVIRONMENT.
Fire Fighting Procedures:USE SCBA TO AVOID DUST GENERATED BY FIRE
    FIGHTING EFFORTS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE METHODS WHICH CONTROL DUSTING (VACUUM, WET
    MOP). IF AIRBORNE DUST IS GENERATED THEN USE AN APPROPRIATE NIOSH
    RESPIRATOR.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE W/COMMONLY ACCEPTED INDUSTRIAL
    SAFETY PROCEDURES.
Other Precautions:AVOID INHALATION OF DUST & PROLONGED CONTACT W/SKIN.
    AVOID CLEANUP PROCEDURES WHICH GENERATE DUST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE AN APPROPRIATE NIOSH APPROVED RESPIRATOR. IF
    AIRBORNE DUST CONCENTRATIONS EXCEED PEL/TLV.
Ventilation:LOCAL EXHAUST: TO LIMIT EXPOSURE TO LESS THAN PEL/TLV.
    MECHANICAL (GENERAL): RECOMMENDED.
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:APRONS/COVERALLS.
Work Hygienic Practices:MAINTAIN GOOD HOUSEKEEPING PROCEDURES TO AVOID
    ACCUMULATION OF DUST.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:3000F
Spec Gravity:6
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK W/ODORLESS POWDER

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Conditions to Avoid Polymerization:HIGH DUSTING.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***