=====================  Product Identification  =====================

MSDS NAME:DECOCOAT, 119
NIIN:00N080180
MSDS Number: CFSCS
=== Responsible Party ===
Company:STO CORP
Address:6175 RIVERSIDE DR SW
City:ATLANTA
State:GA
ZIP:30331
Country:US
Info Phone Num:404-346-3666
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:STCRP
=== Contractor Identification ===
Company:STO CORP
Address:6176 RIVERSIDE DR SW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-346-3666
CAGE:STCRP

=============  Composition/Information on Ingredients  =============

Name:SILICA, CRYSTALLINE - QUARTZ; (SILICON DIOXIDE)
CAS:14808-60-7
RTECS #:VV7330000
Fraction by Wt: 80-100%
OSHA PEL:0.1 MG/M3 (MFR)
ACGIH TLV:0.1 MG/M3 RDUST

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT:DIRECT CONTACT WITH
    MATERIAL MAY CAUSE IRRITATION. INGESTION:MAY CAUSE SOME STOMACH
    DISTRESS. SKIN CONTACT:CONTACT MAY CAUSE REDDENING OR A SLIGHT RASH
    IN INDIVIDUALS WITH SENSITIVE SKIN.  INHALATION:PROLONGED EXPOSURE
    TO RESPIRABLE DUST MAY CAUSE DELAYED (CHRONIC) LUNG INJURY.
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ:IARC
    MONOGRAPHS, VOL 68, 1998:GRP 1. NTP 7TH ANNUAL RPT ON CARCINS,
    1994:ANTIC TO BE CARCIN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:AS W/ANY FOREIGN MATL, THEY SHOULD BE FLUSHED FOR AT LST
    15 MINS W/RUNNING WATER WHILE HOLDING EYES OPEN. THIS WILL ASSIST
    IN FLUSHING MATL FROM EYE. IF IRRIT CONTINUES, SEEK MED ATTN.
    INHAL:GO TO  FRESH AIR. FLOOD WORK AREA W/FRESH AIR& IF IRRIT
    CONTINUES, SEEK MED ATTN. SKIN:WASH W/MILD SOAP & WATER. HAND
    CREAMS SHOULD BE USED TO PVNT DRY SKIN. IF IRRIT, REDDENING/RASH
    OCCURS, SEEK (SUPDAT)

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER SPRAY, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL WILL SPLATTER ABOVE 100C/212F.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DRY STAGE:SWEEP UP & DISPOSE OF IN PROPER
    RECEPTACLE. WET STAGE:SCOOP INTO PROPER RECEPTACLE & ALLOW TO
    HARDEN.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:RESP PROT IS NOT REQD FOR NORMAL USE OF PROD. IF
    MATL IS GROUND UPON/SANDED WHEN IT IS DRY, NIOSH APPRVD RESPS FOR
    DUST SHOULD BE PROVIDED & WORN. ALL WORKERS REQD TO USE RESP PROT
    SHOULD BE TRAINED I N THEIR PROPER SELECTION, USE & CARE.
Ventilation:RECOMMENDED: LOCAL OR MECHANICAL WHEN USING PRODUCT OR
    SANDING IN DRY STATE.
Protective Gloves:PLASTIC OR RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA . PROTECTIVE CLOTHING RECOMMENDED.
Work Hygienic Practices:REMOVE & WASH CONTAM CLTHG. AS W/ALL COMMERCIAL
    & INDUSTRIAL PRODUCTS, ALWAYS WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRST AID PROC:MEDICAL ATTENTION. INGEST:CONTACT MEDICAL HELP
    IMMEDIATELY; UNTRAINED FIRST AID PERSONNEL SHOULD NOT ATTEMPT TO
    ADMINISTER FIRST AID.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Spec Gravity:>1
pH:7.5-10
Evaporation Rate & Reference:<1
Solubility in Water:MISCIBLE
Appearance and Odor:VISCOUS LIQUID; SLIGHT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CO*X, SMOKE, HYDROCARB.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE PER LOCAL, STATE & FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***