=====================  Product Identification  =====================

MSDS NAME:THERMO COTE F
NIIN:00N080140
MSDS Number: CFSBC
=== Responsible Party ===
Company:THERMO COTE INC
Address:295 VREELAND AVE
City:PATERSON
State:NJ
ZIP:07503
Country:US
Info Phone Num:201-345-6206
Emergency Phone Num:201-345-6206
CAGE:51133
=== Contractor Identification ===
Company:THERMO COTE INC
Address:295 VREELAND AVE
Box:City:PATERSON
State:NJ
ZIP:07543
Country:US
Phone:201-345-6206
CAGE:51133

=============  Composition/Information on Ingredients  =============

Name:MINERAL OIL
CAS:8012-95-1
RTECS #:PY8030000
Fraction by Wt: <65%
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3 (MIST)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IF OVERHEATED, VAPORS OF
    MINERAL OIL WILL BE GENERATED, THESE MAY RESULT IN EYE TEARING,
    COUGHING AND RESPIRATORY DISTRESS. CHRONIC: USE TEMPERATURE OF 350F
    CAN CAUSE SERIOUS THERMAL BURNS IF E XPOSED TO TISSUES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE VICTIM TO FRESH AIR. VENTILATE ENCLOSED
    SPACES. EYES: FUMES, FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
    MOLTEN MATERIAL-CALL PHYSICIAN IMMEDIATELY. SKIN: MOLTEN
    MATERIAL-TREAT AS FOR  THERMAL BURNS. INGEST: CALL MD IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:415F,213C
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . HANDLE AS BURNING OIL OR WAX.
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ALLOW TO SOLIDIFY. COLLECT AND RETURN TO
    PROCESS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:ALLOWED SPILLED MOLTEN MATERIAL TO
    SOLIDIFY. SCRAPE UP AND RETURN TO PROCESS.
Other Precautions:DO NOT HEAT MATERIAL OVER 380F.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:LOCAL.
Protective Gloves:INSULATED GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . HOT
    MILL GLOVES OR EQUAL. FACESHIELD.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Solubility in Water:0%
Appearance and Odor:SOLID RESIN, MINERAL OIL SMELL.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY FORM TOXIC PRODUCTS OF COMBUSTION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATION OR LANDFILL IN ACCORDANCE WITH
    FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***