=====================  Product Identification  =====================

MSDS NAME:300102/300150 TWO CYCLE TC-W3 OUTBOARD MOTOR OIL
NIIN:01-398-6103
MSDS Number: CHQPH
=== Responsible Party ===
Company:PITT PENN OIL CO
Address:426 FREEPORT RD
Box:296
City:CREIGHTON
State:PA
ZIP:15030
Country:US
Info Phone Num:724-226-2712
Emergency Phone Num:800-255-3924
CAGE:0A1G5
=== Contractor Identification ===
Company:PITT PENN OIL CO
Address:426 FREEPORT RD
Box:296
City:CREIGHTON
State:PA
ZIP:15030-0296
Country:US
Phone:724-226-2712
CAGE:0A1G5

=============  Composition/Information on Ingredients  =============

Name:SWEETENED MIDDLE DISTILLATES
CAS:64741-86-2
Minumum % Wt:20.
Maxumum % Wt:30.
Other REC Limits:NONE RECOMMENDED

Name:ADDITIVES
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:PROLONGED SKIN CONTACT MAY CAUSE
    DERMATITIS OR IRRITATION.VOMITING MAY CAUSE ASPIRATION INTO LUNGS
    RESULTING IN CHEMICAL PNEUMONIA.CHRONIC EFFECTS OF OVEREXPO:PROL
    SKIN CONTACT MAY CAUSE DERMATITIS OR  SKIN IRRIT.ACUTE TOXICLOGICAL
    PROPERTIES:NO DATA AVAILABLE.
Effects of Overexposure:DERMATITIS, SKIN IRRIT, CHEMICAL PNEUMONIA.
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE,SKIN, &
    RESPIRAOTRY DISORDERS. TARGET ORGANS:RESPIRATORY SYSTEM, CENTRAL
    NERVOUS SYSTEM, SKIN AND EYES.

=======================  First Aid Measures  =======================

First Aid:EYE:IMMED FLUSH W/LG QUANT OF WATER FOR @LEAST 15MINS.CALL
    PHYSICIAN.SKIN:REMOVE EXCESS W/CLOTH/PAPER.WASH THOROUGHLY
    W/SOAP/WATER.PROL SKIN CONTACT MAY CAUSE DERM OR IRRIT.INHAL:REMOVE
    VICTIM TO FRES H AIR.CALL PHYSICIAN.INGEST:CONTACT PHYSICIAN
    IMMED.DO NOT INDUCE VOMIT.(VOMIT MAY CAUSE ASPIRATION INTO LUNGS
    RESULTING IN CHEMICAL PNEUMONIA.)

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:<65.C, 149.F
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:DRY CHEMICAL OR WATER FOG OR CO2 OR FOAM.EXPOSED
    MATERIAL MAY BE COOLED WITH WATER.
Fire Fighting Procedures:DO NOT USE WATER, EXCEPT AS FOG.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID ALL IGN SOURCES-FLAMES,SPARKS.INSURE
    GOOD VENTILATION.IF VOLUME SIGNIFICANT,TRANSF INTO CNTNRS FOR
    DISPO.SEAL CNTNRS TIGHTLY.ABSORB ON INERT INGREDS SUCH AS
    EARTH/SAND/VERMICULITE.SWEEPUP/DISPO  REMAINING MATL IAW
    LOC/STATE/FED REGS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT HANDLE OR STORE AT TEMPERATURES
    OVER 38C/100F.MAX STORAGE TEMPS:38C/100F.
Other Precautions:NEW/USED MOTOR OILS HAVE BEEN TESTED FOR POT CARC IN
    LAB MICE.ONLY USED MOTOR OILS WERE SHOWN TO CAUSE SKIN CANC WHEN
    REP APPLIED TO MICE W/O ANY EFFORT TO REMOVE MATL BETWEEN
    APPLICATIONS.STRICT COMP LIANCE TO OCCUPATIONAL CONTROL (SUPPLE)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE, UNLESS OIL MIST EXCEEDS 5MG/M3.
Ventilation:NONE, UNLESS OIL MIST EXCEEDS 5MG/M3.
Protective Gloves:NEOPRENE OR NITRATE RUBBER
Eye Protection:CHEM SAFETY GOGG W/SIDE SHIELD/FCSHIELD
Other Protective Equipment:LAUNDER SOILED CLOTHES BEFORE REUSE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PRECAUT:PROCEDURES OUTLINED IN DATA SHEET IS BELIEVED TO BE
    ADEQUATE PROTECTION FROM SUCH HAZARDS.

==================  Physical/Chemical Properties  ==================

HCC:V4
Boiling Pt:>180.C, 356.F
Melt/Freeze Pt:=-33.7C, -29.F
Decomp Temp:Decomp Text:NP
Vapor Pres:0.2
Vapor Density:NA
Spec Gravity:0.865-0.87
pH:NA
Viscosity:>=100SUS@100F
Evaporation Rate & Reference:NOT DETERMINED
Solubility in Water:0% @20C, INSOLUBLE
Appearance and Odor:LIQUID, SOLVENT ODOR, GREEN COLOR
Percent Volatiles by Volume:N/DETR
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS SUCH AS HYDROGEN PEROXIDE, BROMINDE, AND CHROMIC ACID.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE
    FROM BURNING.OXIDES OF PHOSPHOROUS.OXIDES OF SULFUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
    LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***