=====================  Product Identification  =====================

MSDS NAME:HALON 1301,FREON FE 1301
NIIN:01-543-6623
MSDS Number: CHQQF
=== Responsible Party ===
Company:ANSUL FIRE PROTECTION, WORMALD U.S.INC.
Address:ONE STANTON STREET
City:MARINETTE
State:WI
ZIP:54143-2542
Country:US
Info Phone Num:715-735-7411
Emergency Phone Num:715-735-7411/800-424-9300(CHEMTREC)
CAGE:03670
=== Contractor Identification ===
Company:ANSUL INC
Address:ONE STANTON STREET
Box:City:MARINETTE
State:WI
ZIP:54143-2542
Country:US
Phone:715-735-7411
CAGE:03670

=============  Composition/Information on Ingredients  =============

Name:TRIFLUOROBROMOMETHANE (HALON 1301) (SARA III)
CAS:75-63-8
RTECS #:PA5425000
Fraction by Wt: >99%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM; 9192
Ozone Depleting Chemical:1

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LC50=416 GM/CUM (RAT)
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES- THE LIQUID FORM OF THIS MATERIAL
    CAN PRODUCE CHILLING SENSATIONS AND DISCOMFORT. SKIN- EVAPORATION
    OF LIQUID FROM THE SKIN CAN PRODUCE CHILLING SENSATIONS. FROSTBITE
    CAN OCCUR. INHALATION- VAPOR  IS HEAVIER THAN AIR AND CAN CAUSE
    SUFFOCATION BY REDUCING OXYGEN AVAILABLE FOR BREATHING. MAY LEAD TO
    NARCOSIS, DEATH.
Effects of Overexposure:ACUTE: DIZZINESS, IMPAIRED COORDINATION,
    REDUCED MENTAL ACUITY, AND CARDIAC EFFECTS CAN OCCUR.
    UNCONSCIOUSNESS OR EVEN DEATH IN HIGH CONCENTRATIONS WITH LONGER
    EXPOSURES. CHRONIC: NONE KNOWN WHEN OCCU PATIONAL EXPOSURE ARE
    BELOW THE TLV.
Medical Cond Aggravated by Exposure:CARDIAC PROBLEMS. ALSO, PRODUCT IS
    AN ASPHYXIANT & CAN INDUCE CARDIAC MUSCLE SENSITIZATION TO
    CIRCULATING EPINEPHRINE-LIKE COMPOUNDS.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH PLENTY OF WATER FOR 15MIN WHILE HOLDING LIDS
    OPEN. SKIN: WASH WITH COPIOUS AMOUNTS OF SOAP & WATER FOR AT LEAST
    15MIN, IF REDNESS, ITCHING OCCURS, GET MEDICAL ATTN, TREAT
    FROSTBITE IF  NECESSARY. INHALATION: REMOVE TO FRESH AIR, IF COUGH
    OR OTHER RESPIRATORY SYMPTOMS OCCUR, CONSULT MEDICAL PERSONNEL.
    INGESTION: NOT LIKELY TO OCCUR.

=====================  Fire Fighting Measures  =====================

Flash Point:NONFLAMMABLE
Extinguishing Media:THIS IS A FIRE EXTINGUISHING AGENT.
Fire Fighting Procedures:USE WATER TO COOL FIRE-EXPOSED CYLINDERS OR
    OTHER CONTAINERS. SELF-CONTAINED BREATHING APPARATUS WITH FULL
    FACEPIECE AND PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:CONTAINERS ARE EQUIPPED WITH PRESSURE AND
    TEMPERATURE RELIEF DEVICES, BUT RUPTURE MAY OCCUR UNDER FIRE
    CONDITIONS AND TOXIC DECOMPOSITION BY-PRODUCTS CAN FORM.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE AREA, VENTILATE TO OUTSIDE
    ATMOSPHERE. COOL OR REMOVE HOT, METAL SURFACES OR SOURCE OF
    NON-EXTINGUISHED FLAMES.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AS A LIQUEFIED COMPRESSED GAS IN
    DOT APPROVED PRESSURE VESSELS AWAY FROM HIGH TEMPERATURE.
Other Precautions:IF CYLINDER IS NOT CONNECTED TO A SYSTEM,IT MUST BE
    SAFETY CAPPED TO PROTECT AGAINST ACTUATION OF VALVE & RELEASE OF
    AGENT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY NECESSARY IF CONTROLS ARE ADEQUATE.
    FOR HIGH CONCENTRATIONS EXCEEDING 10%,OR IF EXPOSURE IS
    PROLONGED,USE POSITIVE PRESSURE AIR-SUPPLIED RESPIRATOR.
Ventilation:MECHANICAL & LOCAL EXHAUST.
Protective Gloves:PLASTIC
Eye Protection:CHEMICAL GOGGLES/FACE SHIELD
Other Protective Equipment:SAFETY SHOWER & EYE WASH ARE GOOD SAFETY
    PRACTICE IN WORK AREAS WHEN WORKING WITH LIQUEFIED PRODUCT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

HCC:G3
Boiling Pt:B.P. Text:-72F,-58C
Melt/Freeze Pt:M.P/F.P Text:-270F,-168C
Vapor Pres:199 PSI
Vapor Density:5.2
Spec Gravity:1.57
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SWEET ODOR, COLORLESS GAS.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACTIVE METALS, FIRES OF METAL HYDRIDES, STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREMELY HIGH TEMPERATURES
Hazardous Decomposition Products:CO, CO2,OXIDES OF BROMIDE & FLORIDE,
    HYDROGEN BROMIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN COMPLIANCE WITL LOCAL, STATE AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***