===================== Product Identification =====================
MSDS NAME:SCOTCH-WELD(TM) DP-190 GRAY EPOXY ADHESIVE (1PA-3653),PART A
NIIN:01-431-3602
Kit Part:Y
MSDS Number: CHQPN
=== Responsible Party ===
Company:MINNESOTA MINING & MFG CO INDUSTRIAL TAPE DIVISION
Address:3M CTR
City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1110/FAX 612-736-3094PRDUCT
Emergency Phone Num:612-733-1110
CAGE:76381
=== Contractor Identification ===
Company:MINNESOTA MINING AND MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
============= Composition/Information on Ingredients =============
Name:POLYMERIC DIAMINE
CAS:68541-13-9
Fraction by Wt: 55-70%
Other REC Limits:NONE RECOMMENDED
Name:KAOLIN
CAS:1332-58-7
RTECS #:GF1670500
Fraction by Wt: 30-45%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9596
Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: <0.1%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9596
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:CHEM RELATED EYE BURNS(CHEM
CORROSIVITY).VAP FRM HEATED MATL & DUST CREATED BY
CUT/GRIND/SAND/MACHINE MAY CAUSE IRRIT.SKIN:ALLERGIC SKIN RX.MILD
SKIN IRRIT.INHAL:IRRT(UPPER RESP TRACT).VAP OF HEAT ED MATL & DUST
FROM CUT/GRIND/SAND/MACHINE MAY CAUSE IRRIT OF RESP
SYS.INGEST:IRRIT GI TISSUES.
Effects of Overexposure:EYE:CLOUDY APPEARANCE OF CORNEA,CHEM
BURNS,PAIN,TEARING,ULCERS,IMPAIRED VISION,LOSS OF
VISION.SKIN:REDNESS,SWELLING,BLISTERING,ITCHING.INHAL:SORENESS OF
NOSE/THROAT,COUGHING,SNEEZING.INGEST:PAIN,VOMIT ING,ABDOMINAL
TENDERNESS,NAUSEA,BLOOD IN VOMITUS,BLOOD IN FECES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYE:IMMED FLUSH W/LG AMTS OF WATER FOR @LEAST 15MINS.GET
IMMED MED ATTN.SKIN:IMMED WASH W/SOAP/LARGE AMTS OF WATER.REMOVE
CONTAM CLOTH.SIGNS/SYMPTOMS OCCUR CALL DR.INHAL:SIGNS/SYMPTOMS
OCCUR REMOVE PE RSON TO FRESH AIR.SIGNS/SYMPTOMS CONT CALL
DR.INGEST:DONT INDUCE VOMIT.DRINK 2GLASSES OF WATER.CALL DR.
===================== Fire Fighting Measures =====================
Flash Point:NA
Autoignition Temp:Autoignition Temp Text:ND
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTH INCLUDE
HELMET,SELF-CONTAIN +PRESSURE OR PRESSURE DEMAND BREATH
APPARATUS,BUNKER COAT/PANTS,BANDS AROUND
ARMS/WAIST/LEGS,FCMASK(SUPP)
Unusual Fire/Explosion Hazard:NONE KNOWN
================== Accidental Release Measures ==================
Spill Release Procedures:REFER TO OTHER MSDS SECS FOR INFO ON
PHY/HEALTH HAZ/RESP PROT/VENTI/PPE.COVER W/ABSORBENT MATL.COLLECT
SPILLED MATL.PLACE IN DOT APPROVED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AWAY FROM HEAT.KEEP OUT OF REACH
OF CHILDREN.KEEP CNTNR TIGHTLY CLSD.
Other Precautions:AVOID EYE/SKIN CONTACT.DONT INGEST.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:AVOID BREATH OF VAPORS.AVOID BREATH OF DUST
CREATED BY CUT/SAND/GRIND.SELECT 1 OF FOLLOWING NIOSH APPROV RESP
BASED ON AIRBORNE CONC OF CONTAM & IAW OSHA REGS:HALF-MASK DUST
RESPIRATOR.
Ventilation:PROVIDE APPRP LOC EXHU FOR GRIND/CUT/SAND CURED MATL.CURING
OVENS MUST BE EXHAU TO OUTDRS/SUITABLE EMISSION CNTRL (SUPP)
Protective Gloves:POLYETHYLENE/EHTYLENE VINYL ALCOHOL
Eye Protection:VENTED GOGGLES,SAF GLASSES W/SIDE SHEILD
Other Protective Equipment:D
Work Hygienic Practices:WASH CONTAM CLOTH BEF REUSE;DISPO OF CONTAM
SHOES.DONT EAT/DRINK/SMOKE WHEN USING PROD.WASH WELL EXPO AREA
W/SOAP/H2O.
Supplemental Safety and Health
FIREFIGHT:PROTECTIVE COVERING FOR EXPO HEAD AREAS. CONDI
AVOID:HEAT/SMOKE. VENTI:DEVICE.USE IN WELL VENTI AREA.EXHAU VENTI
NOT ADEQUTE USE APPROPRIATE RESP PROTECTION.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:ND
Decomp Temp:Decomp Text:NP
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:1.260
pH:NA
Viscosity:60000CENTIPOS
Evaporation Rate & Reference:NA
Solubility in Water:VERY SOLUBLE
Appearance and Odor:PASTE, GRAY, AMINE ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:HEAT GENERATED DURING CURE.DONT CURE MASS
LARGER THAN 50G IN CONF SPACE-PREVENT PREMATURE RX(EXO)W/PROD OF
INTENSE(SUPP)
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE,OXIDES
OF NITROGEN,AMINE COMPOUNDS,TOXIC VAPORS/GASES/OR PARTICULATES.
==================== Disposal Considerations ====================
Waste Disposal Methods:CURE PROD ACCORDING TO PROD
INSTRUCTIONS.INCINERATE UNCURED WASTE IN INDUSTRIAL OR COMMERCIAL
INCINERATOR.DISPO OF COMPLETELY CURED(OR POLYMERIZED)MATL IN
SANITARY LANDFILL.SINCE REGS VARY CONSULT APP LIC REGS/AUTHORITIES
BEF DISPO.EPA HAZ WSTE#:NONE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|