=====================  Product Identification  =====================

MSDS NAME:RDX IN ACETONITRILE
NIIN:00N092023
Status Code:A
MSDS Number: CJLZW
=== Responsible Party ===
Company:RADIAN INTERNATIONAL
Box:201088
City:AUSTIN
State:TX
ZIP:78720-1088
Country:US
Info Phone Num:512-238-9974
Emergency Phone Num:512-238-9974
CAGE:29913
=== Contractor Identification ===
Company:RADIAN INTL LLC
Address:8501 N MOPAC BLVD
Box:201088
City:AUSTIN
State:TX
ZIP:78720-1088
Country:US
Phone:512-419-5224
CAGE:29913

=============  Composition/Information on Ingredients  =============

Name:RDX. FL PT: EXPLODES (PURE RDX). MP: 205-206C. SOL IN H*2O:
    PRACTICALLY INSOLUBLE. SPEC GRAV: 1.82 (WATER =1). APPEAR/ODOR:
    WHITE CRYSTALLINE POWDER.
CAS:121-82-4
RTECS #:XY9450000
= Wt:.1
OSHA PEL:1.5 MG/M3
ACGIH TLV:1.5 MG/M3

Name:ACETONITRILE. BP: 179.6F,82C. MP:< -45C. VP: 100 @ 27C. VAP
    DENS: 1.42. SPEC GRAV: 0.783 (H*20=1). EVAP RATE: 5.79(BUTYL
    ACETATE). SOL IN H*2O: MISCIBLE. APPEAR/ODOR: CLEAR, COLORLESS (ING
    3)
CAS:75-05-8
RTECS #:AL7700000
= Wt:99.9
OSHA PEL:70 MG/M3;40 PPM
ACGIH TLV:67 MG/M3;40 PPM
ACGIH STEL:101 MG/M3;60 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:ING 2: LIQUID, ETHEREAL ODOR. FL PT: 42F,6C. LEL: 4.4%.
    UEL: 16.0%.

=====================  Hazards Identification  =====================

Effects of Overexposure:HLTH HAZS: DROP IN BLOOD PRESSURE, RAPID PULSE,
    LASSITUDE, STUPOR, IRRITABILITY,
INCONSCIOUSNESS AND DEATH. EXPOSURE TO RDX MAY CAUSE CORROSION AND
    IRRITATION OF
SKIN, EYES AND MUCOUS MEMBRANES, HEADA CHE, DIZZINESS, NAUSEA,
    VOMITING, STUPOR AND
WEAKNESS.

=======================  First Aid Measures  =======================

Eyes: IMMEDIATELY FLUSH W/POTABLE WATER FOR AT LEAST 15
    MINUTES, SEEK ASSISTANCE
FROM MD . INGESTION: GIVE VICTIM LARGE QUANTITIES OF LIQUID AND
    TRANSPORT TO
MEDICAL FACILITY. SKIN: IN CASE OF E XTERNAL EXPOSURE, WASH AFFECTED
    AREAS WITH LARGE
AMOUNTS OF WATER AND TRANSPORT TO MEDICAL FACILITY. INHALATION: IF
    BREATHING IS
DISTURBED, GIVE ARTIFICIAL RESPIRATION WHILE TRANSPORTING TO MEDICAL FA
    CILITY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:=5.6C, 42.F
ACN. SEE ING.
Lower Limits:4.4% ACN
Upper Limits:16.0% ACN
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE OR HALON EXTINGUISHER.
Fire Fighting Procedures:NOT APPLICABLE. USE NIOSH APPROVED SCBA AND
    FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THE VAPOR IS HEAVIER THAN AIR AND MAY
    TRAVEL TO A SOURCE OF IGNITION AND FLASH BACK. PURE RDX IS A HIGH
    EXPLOSIVE AND IS SHOCK SENSITIVE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. USE ABSORBENT
    PAPER TO PICK UP ALL SPILLED MATERIAL.
IF NECESSARY, SOAK ABSORBENT PAPER IN AN APPROPRIATE SOLVENT SUCH AS
    TOLUENE OR
ALCOHOL TO PICK UP REMAINING TRACES .

======================	Handling and Storage  ======================

Handling and Storage Precautions:FREEZER. PROTECT FROM LIGHT.
Other Precautions:NOT APPLICABLE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AVOID INHALATION OF VAPORS. NIOSH APPROVED
    CARTRIDGE TYPE RESPIRATOR WITH ORGANIC VAPOR CARTRIDGES
    RECOMMENDED.
Ventilation:LOC EXHST: HNDL IN EFFICIENT FUME HOOD/GLOVE BOX. GEN MECH:
    NORMAL LABORATORY AIR EXCHANGE.
Protective Gloves:USE TWO DISSIMILAR TYPES. PVC OR NEORPRENE OVER
    LATEX.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . LAB
    COAT, APRON OR TYVEK SUIT RECOMMENDED.
Work Hygienic Practices:ONLY EXPERIENCED PERSONNEL SHOULD BE ALLOWED TO
    HANDLE THIS MATERIAL.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:SEE ING 2
Melt/Freeze Pt:M.P/F.P Text:SEE INGS 1 & 2
Vapor Pres:SEE ING 2
Vapor Density:SEE ING 2
Spec Gravity:SEE INGS 1&2
Evaporation Rate & Reference:SEE ING 2
Appearance and Odor:SEE INGREDIENTS 1 AND 2

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES, OXIDIZING AGENTS, REDUCING AGENTS, ALKALI METALS,
    NITROGEN-FLUORIDE CMPDS, OLEUM, PERCHLORATES, NITRATING AGENTS,
    INDIUM, DINITROGEN TETRAOXIDE(ACETONITRILE). MERCURY FULMINATE
    (RDX).
Stability Condition to Avoid:HEAT, SPARKS, OR OTHER SOURCES OF
    IGNITION, SHOCK.
Hazardous Decomposition Products:HIGHLY TOXIC FUMES OF CARBON MONOXIDE,
    CARBON DIOXIDE, NITROGEN OXIDES & HYDROGEN CYANIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MATERIALS SHOULD BE DISPOSED OF UNDER
    CONDITIONS WHICH MEET FEDERAL, STATE,
AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***