=====================  Product Identification  =====================

MSDS NAME:ZIPPER-EASE, CATALOG # ZE-2
NIIN:00-999-7548
Status Code:A
MSDS Number: CLHPR
=== Responsible Party ===
Company:AMERICAN GREASE STICK CO DBA AGS
Address:2651 HOYT ST
Box:729
City:MUSKEGON
State:MI
ZIP:49443
Country:US
Info Phone Num:231-733-2101; 800-253-0403
Emergency Phone Num:800-255-3924 CHEMTEL
Preparer's Name:CHUCK HIDDEMA
CAGE:96980
=== Contractor Identification ===
Company:AMERICAN GREASE STICK CO DBA AGS
Address:2651 HOYT ST
Box:729
City:MUSKEGON
State:MI
ZIP:49443
Country:US
Phone:231-733-2101; 800-253-0403
CAGE:96980
Company:RAYTHEON NASP
State:FL
Country:US
Phone:904-455-0673 FAX #
CAGE:UO304

=============  Composition/Information on Ingredients  =============

Name:PARAFFIN WAX
CAS:64742-51-4
RTECS #:1003607PW
Minumum % Wt:30.
Maxumum % Wt:45.
Other REC Limits:NONE SPECIFIED

Name:PETROLEUM OIL
RTECS #:1001346PO
Minumum % Wt:30.
Maxumum % Wt:45.
Other REC Limits:NONE SPECIFIED
OSHA PEL:5 MG/M3 OIL MIST
ACGIH TLV:5 MG/M3 OIL MIST

Name:NAPHTHENIC ACID, ZINC SALT
CAS:12001-85-3
RTECS #:QK9275000
Minumum % Wt:1.
Maxumum % Wt:5.
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE IRRITATION. SKIN: MAY
    CAUSE BURNS IN THE MOLTEN STATE. INGESTION: NOT KNOWN. INHALATION:
    ASPIRATION OR INHALATION OF FUMES OR MIST MAY CAUSE RESPIRATORY
    PROBLEMS. OTHER EFFECTS: NOT KN OWN.
Explanation of Carcinogenicity:NONE OF THE LISTED MATERIALS IN THIS
    PRODUCT IS LISTED AS A CARCINOGEN BY NTP, IARC, OR OSHA.
Effects of Overexposure:EYES: MAY CAUSE IRRITATION. SKIN: MAY CAUSE
    BURNS IN THE MOLTEN STATE. INGESTION: NOT KNOWN. INHALATION:
    ASPIRATION OR INHALATION OF FUMES OR MIST MAY CAUSE RESPIRATORY
    PROBLEMS. OTHER EFFECTS: NOT KN OWN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. CONSULT A
    PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. GET MEDICAL ATTENTION IF
    ADVERSE EFFECTS ARISE. INGESTION: DO NOT INDUCE VOMITING. CONSULT A
    PHYSIC IAN. INHALATION: REMOVE TO FRESH AIR. ADMINISTER OXYGEN OR
    ARTIFICIAL RESPIRATION AS NEEDED.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:=193.3C, 380.F
Autoignition Temp:Autoignition Temp Text:N/D
Lower Limits:N/D
Upper Limits:N/D
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
    CHEMICAL.
Fire Fighting Procedures:WEAR  SELF CONTAINED BREATHING APPARATUS. USE
    WATER FOG TO MINIMIZE VAPORS IN AIR.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE AREA TO CONTAIN PRODUCT SPILL. ALLOW TO
    COOL, SCRAPE MATERIAL UP AND PLACE IN CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID EXCESS HEAT AND IGNITION
    SOURCES. STORE IN COOL AREA.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:YES
Ventilation:LOCAL EXHAUST WHEN USING PRODUCT IN MOLTEN STATE.
Protective Gloves:YES
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:SAFETY SHOWER. EYE WASH IN WORK AREA.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:N/D
Melt/Freeze Pt:=72.8C, 163.F
Vapor Pres:NEGLIGIBLE
Spec Gravity:0.75 (WATER=1)
pH:N/D
Solubility in Water:INSOLUBLE
Appearance and Odor:TAN WAXY SOLID WITH BLAND PETROLEUM ODOR.
Percent Volatiles by Volume:NIL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF CARBON AND ZINC.

===================  Toxicological Information	===================

Toxicological Information:NOT PROVIDED

=====================  Ecological Information  =====================

Ecological:NOT PROVIDED

====================  Disposal Considerations  ====================

Waste Disposal Methods:REMOVAL BY AN APPROVED, LICENSED WASTE HAULER.
    EPA WASTE I.D. NO. - D001.

===================  MSDS Transport Information  ===================

Transport Information:NOT PROVIDED

=====================  Regulatory Information  =====================

Federal Regulatory Information:NOT PROVIDED
State Regulatory Information:NOT PROVIDED

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***