=====================  Product Identification  =====================

MSDS NAME:MDS090730,MDS090730Z,ALCOHOL PREP PADS,ISOPROPYL ALCOHOL
NIIN:01-425-0026
Status Code:A
MSDS Number: CLHQC
=== Responsible Party ===
Company:MEDLINE INDUSTRIES, INC.
Address:ONE MEDLINE PLACE
City:MUNDELEIN
State:IL
ZIP:60060-4464
Country:US
Info Phone Num:1-914-365-1700
Emergency Phone Num:1-914-365-1700
Resp. Party Other MSDS Num.:PROD CODES: MDS090730, MDS090730Z
CAGE:51699
=== Contractor Identification ===
Company:MEDLINE INDUSTRIES, INC.
Address:ONE MEDLINE PLACE
Box:City:MUNDELEIN
State:IL
ZIP:60060-4464
Country:US
Phone:1-914-365-1700
CAGE:51699

=============  Composition/Information on Ingredients  =============

Name:ISOPROPYL ALCOHOL
CAS:67-63-0
RTECS #:NT8050000
= Wt:70.
OSHA PEL:980 MG/M3;400 PPM
ACGIH TLV:983 MG/M3;400 PPM
ACGIH STEL:1230 MG/M3;500 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: IF RASH APPEARS, DISCONTINUE
    USE. EYES: WILL CAUSE EYE STING IF SPLASHED. INHALATION: NONE
    INGESTION: NOT A NORMAL ROUTE OF ENTRY.
Effects of Overexposure:SKIN: IRRITATION, RASH. EYES: WILL CAUSE EYE
    STING IF SPLASHED. INHALATION: NONE INGESTION: NOT A NORMAL ROUTE
    OF ENTRY.

=======================  First Aid Measures  =======================

First Aid:SKIN CONTACT: DISCONTINUE USE IF RASH OR IRRITATION OCCURS.
    EYE CONTACT: FLUSH WITH COLD WATER FOR 15 MINUTES. INHALATION:
    REMOVE TO FRESH AIR. INGESTION: INDUCE VOMITING. CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:=25.6C, 78.F
Lower Limits:2.0
Upper Limits:12.0
Extinguishing Media:DRY CHEMICAL OR CHEMICAL TYPE FOAM, CARBON DIOXIDE.
Fire Fighting Procedures:HANDLE AS FLAMMABLE LIQUID. USE RESPIRATORY
    PROTECTION FOR FIRE FIGHTING PERSONNEL.
Unusual Fire/Explosion Hazard:CLASS 3 FLAMMABILITY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. FLUSH
    SPILLS WITH WATER, HANDLE AS FLAMMABLE LIQUID.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FORM HEAT AND SOURCES OF
    IGNITION.
Other Precautions:DON'T ALLOW LARGE QUANTITIES OF WASTE TO ACCUMULATE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE IF PERMISSIBLE EXPOSURE LIMITED IS EXCEEDED.
Ventilation:LOCAL EXHAUST: RECOMMENDED.
Eye Protection:ONLY IS SPLASHING IS EXPECTED.
Work Hygienic Practices:GOOD HOUSEKEEPING PRACTICES SHOULD BE FOLLOWED.
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

HCC:F3
Solubility in Water:COMPLETE
Appearance and Odor:FABRIC SATURATED WITH CLEAR LIQUID WITH ALCOHOL
    ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:OXIDES OF CARBON.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:FLUSH SPILLS WITH WATER, HANDLE AS FLAMMABLE
    LIQUID. FOLLOW LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***