=====================  Product Identification  =====================

MSDS NAME:SOLVENT FREE FLOOR RESTORE PART B
NIIN:01-397-0161
Status Code:A
MSDS Number: CLNXD
=== Responsible Party ===
Company:KEY POLYMER CORPORATION
Address:JACOBS WAY LAWRENCE INDUTRIAL PARK
City:LAWRENCE
State:MA
ZIP:01842
Country:US
Info Phone Num:508-683-9411
Emergency Phone Num:800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:4B315
=== Contractor Identification ===
Company:KEY POLYMER CORPORATION
Address:JACOBS WAY LAWRENCE INDUTRIAL PARK
Box:City:LAWRENCE
State:MA
ZIP:01842
Country:US
Phone:508-683-9411
CAGE:4B315

=============  Composition/Information on Ingredients  =============

Name:PROPRIETARY MIXTURE OF AMINES
Minumum % Wt:50.
Maxumum % Wt:85.

Name:PROPRIETARY MIXTURE OF AMINES
Minumum % Wt:15.
Maxumum % Wt:50.

Name:MODIFIED POLYSULFIDE POLYMER
CAS:117527-71-6
Minumum % Wt:15.
Maxumum % Wt:50.

=====================  Hazards Identification  =====================

Health Hazards Acute and Chronic:LIQUID CONTACT IS CORROSIVE TO THE
    SKIN OR EYES. AND CORROSIVE TO THE UPPER RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR.  EYE CONTACT: FLUSH WITH
    WATER FOR 15 MINUTES WITH LIDS OPEN.SEEK MEDICAL ATTENTION.SKIN
    CONTACT:REMOVE CONTAMINATED CLOTHING. WASH AFFECTED AREA WITH  SOAP
    AND WATER.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:=93.3C, 200.F
Extinguishing Media:FOAM, CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR POSITIVE PRESSURE SELF-CONTAINED NIOSH
    APPROVED BREATHING EQUIPMENT.
Unusual Fire/Explosion Hazard:SEALED CONTAINER MAY RUPTURE. KEEP COOL
    WITH WATER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. SPILL AREA WILL BE SLIPPERY.
    CONTAIN SPILL. RECOVER AS MUCH AS POSSIBLE FOR REUSE.SPREAD
    COMMERCIAL ABSORBENT OVER REMAINDER AND PLACE INTO SEALED
    CONTAINERS FOR DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE WITH
    ADEQUATE VENTILATION. DO NOT BREATHE VAPORS OR MISTS. DO NOT GET
    LIQUID IN EYES, ON SKIN OR ON CLOTHING.
Other Precautions:AS WITH ALL CHEMICALS, GOOD INDUSTRIAL HYGIENE AND
    PROPER WORK HABITS SHOULD BE OBSERVED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AVOID INHALING THE VAPORS IN THE HEADSPACE OF
    CONTAINERS. WHEN USING THIS PRODUCT AS INTENDED AND VIA THE TYPICAL
    APPLICATION TECHNIQUES, THE USER WILL NOT BE EXPOSED TO HAZARDOUS
    CONCENTRATIONS OF VA PORS AND WILL NOT EXPERIENCE A STRONG OR
    OBJECTIONABLE ODOR.RESPIRATORS ARE NOT REQUIRED FOR THE SAFE USE OF
    THIS PRODUCT.
Ventilation:MECHANICALLY EXHAUST VAPORS AT POINT (S) OF APPICATION.
Protective Gloves:IMPERVIOUS.
Eye Protection:SPLASH GOGGLES.
Other Protective Equipment:CHEMICALLY RESISTANT OUTER CLOTHING OR
    APRON.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING OR SMOKING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:>148.9C, 300.F
Spec Gravity:1.07
VOC Grams/Liter:8.9
Evaporation Rate & Reference:NIL
Solubility in Water:100%
Appearance and Odor:PALE YELLOW LIQUID AMINE ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS STRONG ACIDS STRONG BASES.
Stability Condition to Avoid:MIXTURE WITH OR EXPOSURE TO INCOMPATIBLE
    MATERIALS.
Hazardous Decomposition Products:CARBON MONOXIDE  CARBON DIOXIDE
    ALDEHYDES AROMATIC HYDROCARBONS.
Conditions to Avoid Polymerization:WILL NOT OCCUR

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***