=====================  Product Identification  =====================

MSDS NAME:MAGNABOND 6004, A & B
NIIN:01-360-1583
Status Code:A
MSDS Number: CLNXG
=== Responsible Party ===
Company:MAGNOLIA PLASTICS INC
Address:5547 PEACHTREE INDUSTRIAL BLVD
City:CHAMBLEE
State:GA
ZIP:30341-2234
Country:US
Info Phone Num:(770) 451-2777/(800) 457-4280
Emergency Phone Num:800-457-4280
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:22121
=== Contractor Identification ===
Company:MAGNOLIA PLASTICS INC
Address:5547 PEACHTREE INDUSTRIAL BLVD
Box:City:CHAMBLEE
State:GA
ZIP:30341-2234
Country:US
Phone:(770) 451-2777/(800) 457-4280
CAGE:22121

=============  Composition/Information on Ingredients  =============

Name:EPOXY RESIN
Minumum % Wt:20.
Maxumum % Wt:30.

Name:DIBUTYL PHTHALATE(DBP)
Minumum % Wt:4.
Maxumum % Wt:8.
ACGIH TLV:5 MG/M3

Name:AROMATIC AMINE
Minumum % Wt:40.
Maxumum % Wt:50.

Name:AMINE
Minumum % Wt:20.
Maxumum % Wt:30.

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MODERATELY IRRITATING TO SKIN AND
    EYES. POSSIBLE SKIN SENSITIZER. VAPORS ARE IRRITATING TO SKIN AND
    EYES. PRE-EXISTING SKIN AND EYE DISORDERS MAY BE AGGRAVATED.
Effects of Overexposure:NOT LIKELY TO PRODUCE  ADVERSE EFFECTS DUE TO
    LOW VOLATILITY VAPORS ARE IRRITATING TO THE SKIN AND EYES. LOW
    ORDER OF TOXICITY. MODERATE TOXICITY; MAY CAUSE BURNS OF MOUTH AND
    THROAT. NOT LIKELY TO BE  ABSORBED THROUGH THE SKIN IN TOXIC
    AMOUNTS.REPEATED OR PROLONGED EXPOSURE MAY BE HARMFUL.MODERATELY
    IRRITATING;MAY CAUSE SKIN SENSITIZATION. MAY CAUSE CHEMICAL BURNS
    AND/OR DEVELOP ALLERGIC REACTION  MODERATELY IRRITATING. MODERATELY
    IRRITATING; PERMANENT DAMAGE POSSIBLE ON PROLONGED EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:SKIN:REMOVE CONTAMINATED CLOTHING. WASH FROM SKIN WITH SOAP
    AND WATER.LAUNDER CLOTHING PRIOR TO RE-USE.EYES: FLUSH WITH WATER
    FOR 15 MINUTES WHILE HOLDING THE EYELIDS OPEN.GET MEDICAL
    ATTENTION.INHALA TION: REMOVE VICTIM TO FRESH AIR.ADMINISTER OXYGEN
    IF NECESSARY.    INGESTION: DO NOT INDUCE VOMITING. GIVE LARGE
    DOSES OF WATER. GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:=93.3C, 200.F
Extinguishing Media:WATER SPRAY, FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:AVOID BREATHING SMOKE AND VAPORS. IN A
    CONFINED AREA, USE FULL FIRE FIGHTING EQUIPMENT INCLUDING AN
    APPROVED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
    CONTAINERS WITH WATER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID CONTACT WITH LIQUID AND VAPORS . WIPE
    WITH A CLOTH OR COLLECT ON ABSORBENT MATERIAL. FOR LARGE SPILLS,
    DIKE AND CONTAIN.PUMP OR SHOVEL INTO SALVAGE CONTAINERS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY AREA IN TIGHTLY
    CLOSED CONTAINERS.AVOID CONTACT WITH SKIN AND EYES.    USE WITH
    ADEQUATE VENTILATION. USE GOOD HYGIENE PRACTICES.
Other Precautions:NOT CONSIDERED TO BE A HAZARDOUS WASTE NOT LISTED.NOT
    REGULATED.CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S., UN 3267

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST MECHANICAL:Protective Gloves:IMPERVIOUS
    RUBBER.
Eye Protection:SPLASH PROOF CHEMICAL GOGGLES.
Other Protective Equipment:FOR PROLONGED EXPOSURE, IMPERVIOUS CLOTHING
    AND BOOTS. MAY CAUSE SKIN IRRITATION. CORROSIVE . MAY CAUSE SEVERE
    EYE BURNS.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:>107.2C, 225.F
Vapor Pres:NIL
Vapor Density:>1
Spec Gravity:2.19
Evaporation Rate & Reference:>1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:A BLACK VISCOUS LIQUID; CHARACTERISTIC ODOR B BROWN
    LIQUID; AMMONIACAL ODOR
Percent Volatiles by Volume:0%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS AND BASES.
Stability Condition to Avoid:LARGE MIXTURES IN BULK. CURING PROCESS IS
    EXOTHERMIC.
Hazardous Decomposition Products:OXIDES OF CARBON AND NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:REMOVE SALVAGE CONTAINERS TO A WASTE DISPOSAL
    SITE OPERATING IN COMPLIANCE TO FEDERAL, STATE AND LOCAL
    REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***