=====================  Product Identification  =====================

MSDS NAME:R8-2038
NIIN:00-935-4012
Kit Part:Y
MSDS Number: BFXNG
=== Responsible Party ===
Company:HYSOL DIV. THE DEXTER CORP.
Emergency Phone Num:716-372-6300
CAGE:KO252
=== Contractor Identification ===
Company:DEXTER CORP THE DEXTER ELECTRONIC MATERIAL DIV
Address:211 FRANKLIN ST.
Box:City:OLEAN
State:NY
ZIP:14760-1297
Country:US
Phone:716-372-6300/6309
CAGE:04347
Company:HYSOL DIV. THE DEXTER CORP.
CAGE:KO252

=============  Composition/Information on Ingredients  =============

Name:N-BUTYL GLYCIDYL ETHER (BGE)
CAS:2426-08-6
RTECS #:TX4200000
Fraction by Wt: 12%.
OSHA PEL:50 PPM
ACGIH TLV:25 PPM; 9293

Name:EPOXY RESIN

=====================  Hazards Identification  =====================

Effects of Overexposure:MFR STATES NO ACUTE SYMPTOMS EXPECTED.A
    SENSITIZER.PROLONGED/REPEATED CONTACT MAY CAUSE SKIN RSH

=======================  First Aid Measures  =======================

First Aid:EYE:IMMED FLUSH W/WATER AT LEAST 15 MIN.CALL MD.SKIN:FLUSH
    W/PLENTY OF WATER.WASH THOUOUGHLY W/SOAP & WATER.REMOVE
    CONTAMINATED CLOTHING.WASH BEFORE REUSE

=====================  Fire Fighting Measures  =====================

Flash Point:200F TOC
Lower Limits:0.4
Upper Limits:1.3
Extinguishing Media:SMALL FIRE:CO*2,DRY CHEM. LARGE FIRE:ORDINARY FOAM
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:COVER W/ABSORBENT MATERIAL,THEN SCRAPE UP AND
    TRANSFER TO METAL CONTAINER.OBSERVE FLAMMABLE CHARACTERISTICS OF
    SOLVENTS,IF USED TO WIPE UP STICKY RESIDUE.ALSO TAKE PRECAUTIONS
    AGAINST INHALATION HAZAR D

======================	Handling and Storage  ======================

Handling and Storage Precautions:WARNING:MAY CAUSE SKIN SENSITIZATION &
    OTHER ALLERGIC RESPONSES.USE ONLY W/ADEQUATE
    VENTILATION,PARTICULARLY IF HEATED OR SPRAYED
Other Precautions:AVOID CONTACT W/SKIN OR EYES.PROVIDE SAFETY SHOWER &
    EYE WASH

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD RESP PROTECTION FOR PARTICLR
    EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST -PREFERRED.MECHANICAL-ACCEPTABLE
Protective Gloves:PLASTIC OR RBBR
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:COVERALLS OR APRON -PROTECT FROM SKIN &
    CLOTHING CONTAMINATI
Supplemental Safety and Health
BP GIVE @ 95 MMHG. VAPOR DENSITY GIVEN @ 25C. PART A OF A TWO PART
    PRODUCT PART B IS HD-3490, SEE SAME NSN, P/N INDICATOR B. MIX RATIO
    (BY WT.) PART A/PART B IS 100/20.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:284F
Vapor Pres:2.
Vapor Density:3.8
Spec Gravity:1.14
Evaporation Rate & Reference:>1 BUTYL ACETATE
Solubility in Water:<1%
Appearance and Odor:AMBER LIQ,SWEET,PLEASANT ODOR,LOW VISCOSITY
Percent Volatiles by Volume:15.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS,AMINES,MERCAPTANS AND BASES
Hazardous Decomposition Products:CO,ALDEHYDES & OTHER ORGANICS
Conditions to Avoid Polymerization:EXOTHERMS WHEN CURED

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONTROLLED BURNING OR BURY IN SANITARY LANDFILL
    IN ACCORDANCE W/LOCAL ,STATE AND FEDERAL REGULATIONS

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***