=====================  Product Identification  =====================

MSDS NAME:WHITE 27875, ENAMEL SEMI-GLOSS
NIIN:00-935-3994
MSDS Number: BFXMY
=== Responsible Party ===
Company:CON-LUX COATINGS, INC
Address:226 TALMADGE RD
Box:847
City:EDISON
State:NJ
ZIP:08818-0847
Country:US
Info Phone Num:908-287-4000 / FAX 908-287-9288
Emergency Phone Num:908-287-4000
CAGE:6A064
=== Contractor Identification ===
Company:CON-LUX COATINGS, INC
Address:226 TALMADGE RD
Box:847
City:EDISON
State:NJ
ZIP:08818-0847
Country:US
Phone:908-287-4000
CAGE:6A064

=============  Composition/Information on Ingredients  =============

Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: 28.0%
OSHA PEL:100 PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:EYE & SKIN:IRRIT. INH: (VAPORS) IRRIT RESP
    TRACT & CAUSE HEADACHE OR DIZZINESS.

=======================  First Aid Measures  =======================

First Aid:SKIN & EYES:FLUSH W/PLENTY OF WATER. INHALATION:REMOVE TO
    FRESH AIR. IF IRRITATION PERSISTS, CONSULT A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:123F TCC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:CO*2, DRY CHEMICAL, OR FOAM. WATER SPRAY MAY BE
    INEFFECTIVE.
Fire Fighting Procedures:USE WATER TO COOL CLOSED CANS. KEEP CANS
    TIGHTLY CLOSED.
Unusual Fire/Explosion Hazard:ISOLATE FROM IGNITION SOURCES. EXCESSIVE
    HEAT MAY EXPLODE CLOSED CANS. DO NOT APPLY TO HOT SURFACES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE AL SURCES OF IGNITION (FLAMES, HOT
    SURFACES, & ELECTRICA, STATIC OR FRICTIONAL SPARKS.) AVOID
    BREATHING VAPORS, VENTILATE AREA REMOVE W/INERT ABSORBENT &
    NON-SPARKING TOOLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE AT ELEVATED TEMPERATURES.
    KEEP AWAY FROM OPEN FLAME & SPARKS.
Other Precautions:DO NOT TAKE INTERNALLY. GROUND CONTANERS WHEN
    POURING. AVOID PROLONGED OR REPEATED CONTACT W/SKIN. DOT:
    COMBUSTIBLE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:APPROVED CHEMICAL-MECHANICA FILTER RESPIRATOR.
Ventilation:SUFFICIENT TO KEP TLV BELOW ACCEPTABLE LIMIT.
Protective Gloves:YES
Eye Protection:YES, FOR SPLASH
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT
    W/CONTAMINATED CLOTHING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:346-403F
Vapor Pres:4
Vapor Density:5.30
Spec Gravity:1.2500
Evaporation Rate & Reference:0.05 (N-BUAC)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:MILD ALIPHATIC ODOR-WHITE LIQUID.
Percent Volatiles by Volume:48.0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO*2

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT INCINERATE CLOSED CONTANERS. DISPOSE IN
    ACCORDANCE W/FED., STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***