===================== Product Identification =====================
MSDS NAME:TT-E-509B, WHITE 27875 PAINT
NIIN:00-935-3994
MSDS Number: BFXNC
=== Responsible Party ===
Company:ATLAS PAINT & VARNISH CO
Country:US
Emergency Phone Num:201-373-3300
CAGE:KO008
=== Contractor Identification ===
Company:ATLAS PAINT & VARNISH CO.
CAGE:KO008
Company:ATLAS PAINT AND VARNISH CO
CAGE:84239
============= Composition/Information on Ingredients =============
Name:PIGMENTS, SEE SUPP DATA FOR SPECIFIC TYPES
Fraction by Wt: 35.0%
ACGIH TLV:15 MG/CUM, MFG
Name:ALKYD RESIN
Fraction by Wt: 40.0%
Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: 24.0%
OSHA PEL:100 PPM
Name:COBALT CALCIUM DRIERS
Fraction by Wt: 1.0%
ACGIH TLV:500 PPM, MFG
===================== Hazards Identification =====================
Effects of Overexposure:ANESTHESIA, HEADACHE, NAUSEA, DIZZINESS
======================= First Aid Measures =======================
First Aid:REMOVE VICTIM & RESTORE BREATHING. IF REQUIRED, CALL MD.
FLUSH AFFECTED PARTS W/MILD SOAPY WATER; FLUSH EYES W/WATER.
===================== Fire Fighting Measures =====================
Flash Point:123F TCC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:DO NOT USE WATER. CONSULT FIRE MARSHALL.
Unusual Fire/Explosion Hazard:VAPOR FROM EXPLOSIVE MIX W/AIR BETWEEN
UPPER & LOWER EXPLOSION LIMITS
================== Accidental Release Measures ==================
Spill Release Procedures:WIPE UP IMMED & DISCARD ABSORBENTS SAFELY.
REMOVE OPEN IGNITION. DIKE LG SPILLS & PUMP TO WASTE TANK. KEEP
VENTILATED & AVOID PROLONGED BREATHING OF VAPORS.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID OPEN SOURCES OF IGNITION,
EXCESSIVE HEAT. VENTILATE AREA.
Other Precautions:READ LABEL REGARDING TOXICITY & APPLICATION. DOT:
COMBUSTIBLE LIQUID.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:RECOMMENDED NIOSH APP RESP PROT FOR PART EXP OF
CONCERN
Ventilation:LOCAL EXHAUST, MOST DESIRABLE
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:CONVENTIONAL CLOTHING FOR PAINTING
Supplemental Safety and Health
PIGMENTS: TIO*2, SILICATES. MFG SUGGESTS TLV OF 400 PPM.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:346 - 403F
Vapor Pres:1
Vapor Density:5.30
Spec Gravity:1.1800
Evaporation Rate & Reference:0.05 BUAC
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VIRTUALLY NO ODOR, THIN WHITE PAINT
Percent Volatiles by Volume:45.0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAME
Hazardous Decomposition Products:CO, CO*2 WHEN COMBUSTED
==================== Disposal Considerations ====================
Waste Disposal Methods:SPECIAL HAZARDOUS WASTE CARRIER. EPA REGULATED,
STATE, FED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|