=====================  Product Identification  =====================

MSDS NAME:WHITE #27875 (PAINT)
NIIN:00-935-3995
MSDS Number: BFXNF
=== Responsible Party ===
Company:ATLAS PANT AND VARNISH CO
Emergency Phone Num:(201)373-3300
CAGE:LO661
=== Contractor Identification ===
Company:ATLAS PAINT AND VARNISH CO
CAGE:84239
Company:ATLAS PANT AND VARNISH COMPANY
CAGE:LO661

=============  Composition/Information on Ingredients  =============

Name:ALKYD RESIN
Fraction by Wt: 40%

Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: 24%
OSHA PEL:100 PPM

Name:COBALT CHLORIDE DRIER
ACGIH TLV:500 PPM-MFG

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Name:YELLOW OXIDE:TITANIUM DIOXIDE AND YELLOW OXIDE COMPRISE 35%
    OF PRODUCT,MFG TLV 15 MG/CUM

=====================  Hazards Identification  =====================

Effects of Overexposure:ANESTHESIA, HEADACHE, NAUSEA, DIZZINESS, ETC.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE VICTIM TO FRESH AIR & RESTORE BREATHING IF REQ.
    CALL MD SKIN: FLUSH AFFECTED PARTS W/MILD SOAP & WATER.
    EYES:IMMEDIATELY FLUSH W/WATER.

=====================  Fire Fighting Measures  =====================

Flash Point:123F TCC
Lower Limits:1
Upper Limits:6.0
Extinguishing Media:CO*2, FOAM, DRY CHEMICALS, WATER FOG
Fire Fighting Procedures:DO NOT USE WATER. CONSULT FIRE MARSHALL.
Unusual Fire/Explosion Hazard:VAPOR FILM FORMS EXPLOSIVE MIX W/AIR
    BETWEEN UPPER & LOWER EXPLOSION LIMITS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP IMMEDIATELY & DISCARD ABSORBANTS
    SAFELY. REMOVE OPEN IGNITION. DIKE LARGE SPILLS AND PUMP TO WASTE
    TANK. KEEP VETILATED AND AVOID PROLONGED BREATHING OF VAPORS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID OPEN SURCES OF IGNITION,
    EXCESSIVE HEAT, VENTILATE AREA.
Other Precautions:READ LABEL REGARDING TOXICITY AND APPLICATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APP. RESP. PROT. FOR THE PARTICULAR
    EXP. OFCONCERN.
Ventilation:LOCAL IS MOST DESIRABLE
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:CONVENTIONAL CLOTHING FOR PAINTING.
Supplemental Safety and Health
VAPOR PRESSURE IS GIVE AT 100F MFG SUGGESTS TLV OF 400 PPM.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:346 TO 403F
Vapor Pres:1
Vapor Density:5.3
Spec Gravity:1.18
Evaporation Rate & Reference:0J.05 N-BUTYL AC
Solubility in Water:NEGLIGIBLE
Appearance and Odor:THIN OFF WHITE PAINT-VIRTUALLY NO ODOR.
Percent Volatiles by Volume:45

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAME
Hazardous Decomposition Products:CO, CO*2 WHEN COMBUSTED

====================  Disposal Considerations  ====================

Waste Disposal Methods:SPECIAL HAZARDOUS WASTE CARRIER EPA REGULATED.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***