=====================  Product Identification  =====================

MSDS NAME:LACQUER ACRYLIC N/C CAM GRN 34079 ID792406
NIIN:00-900-0737
MSDS Number: BHMXH
=== Responsible Party ===
Company:PRATT & LAMBERT, INC.
Address:16116 E 13TH ST
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Preparer's Name:W.A. ELLISON
CAGE:FO127
=== Contractor Identification ===
Company:PRATT & LAMBERT, INC/BUFFALO, NY 14240
Box:22
CAGE:FO127
Company:PRATT AND LAMBERT INC
Address:Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196

=============  Composition/Information on Ingredients  =============

Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 22%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:DI-SEC-OCTYL PHTHALATE (DI-2-ETHYLHEXYL-PHTHALATE)	(SARA
    III)
CAS:117-81-7
RTECS #:TI0350000
OSHA PEL:5 MG/M3/10 STEL
ACGIH TLV:5 MG/M3; 9192
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 33%
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

Name:NITROCELLULOSE
CAS:9004-70-0
RTECS #:QW0970000
OSHA PEL:NONE ESTABLISHED
ACGIH TLV:NONE ESTABLISHED

Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192

Name:SILICA, AMORPHOUS, DUST
CAS:112945-52-5
RTECS #:VV7310000
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3; 8990

Name:ISOBUTYL ACETATE  (SARA III)
CAS:110-19-0
RTECS #:AI4025000
OSHA PEL:150 PPM
ACGIH TLV:150 PPM; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:ISOBUTYL ALCOHOL  (SARA III)
CAS:78-83-1
RTECS #:NP9625000
Fraction by Wt: 10%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 70%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:VOC. ORGANIC CMPD 5.2 LB/GAL LESS WATER & NPRS* 624 G/L    
    LESS WATER VOC. 19.2 LB/GAL SOLIDS 2304 G/L SOLIDS CALCU
RTECS #:9999999VO

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:REPEATED OVEREXPOSURE TO TULUENE MAY
    CAUSE LIVER DAMAGE. ASPIRATION OF MATL INTOLUNG MAY CAUSE CHEMICAL
    PNEUMONITIS WHICH CAN BE FATAL. HIGH CONCENT. MAY CAUSE ACUTE CNTRL
    NERVOUS SYSTEM DEPRESS. REPE ATED OVREXPOSURE TO SOLVENTS
    W/PERMANENTBRAIN DAMAGE. INTENTIONAL MISUSE MAY BE HARMFUL OR
    FATAL.
Explanation of Carcinogenicity:DI(2-ETHYLHEXYL) PHTHALATE IS LISTED AS
    POTENTIAL CARCINOGEN
Effects of Overexposure:EYE: IRRITATION 			       
				    SKIN: IRRITATION AND DEFATTING OF
    SKIN					  INHAL: NOSE,THROAT
    IRRITATION, HEADACHES , DIZZINESS, NAUSEA, AND CONFUSIONINGST:
    GASTROINTESTINAL IRRITATION, NAUSEA, AND VOMITING.
Medical Cond Aggravated by Exposure:REPEATED OVEREXPOSURE TO TOLUENE
    MAY CAUSE LIVER  DAMAGE.

=======================  First Aid Measures  =======================

First Aid:INGST: DO NOT INDUCE VOMITING, CALL A PHYSICIAN IMMEDIATELY  
		      INHAL: REMOVE TO FRESH AIR IMMEDIATELY,GIVE
    ARTIFICIAL RESP. IF NECESSARY,KEEP	WARM/QUIET, GET MEDICAL ATTN
    IMMEDIATELY .SKIN: REMOVE CONTAMINATED CLOTHING. WASH AFFECTED AREA
    W/SOAP & WATER,GET MEDICLATTN.; EYE: FLUSH W/LG AMNTS OF WTR FOR 15
    MINS. LIFTING EYELIDS,GET MED. ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point:24F/-4.44C
Extinguishing Media:USE NFPA CLASS B EXTINGUISHER. POLYMER FOAM IS
    PREFERRED FORLARGE FIRES.
Fire Fighting Procedures:WEAR SCBA. WATER MAY BE INEFFECTIVE, BUT MAY
    BE USED TO COOL CONTNRS TO PREVENT PRESSURE BUILD-UP & POSS.
    IGNITION.IF WATER IS USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:OVEREXPOSURE TO DECOMPOSITION PRODUCTS
    MAY CAUSE HEALTH HAZARD.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION . DIKE &
    CONTAINSPILL W/INERT MATERIAL. USE ONLY NON SPARKING TOOLPLACE
    ABSORBENT DIKING MATL IN COVERED METAL  CONTAINERS FOR DISPOSAL.
    PREVENT CONTAMINATION OF SEW- ERS,STREAM,GRNDWATER W/SPILLED MATL
    OR USED ABSORB

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 95F. STORE IN LG
    QTYS IN COMPLIANCE WITH OSHA 29CFR1910.106. CLOSE CONTNRS AFTER
    EACH USE. NEVER USE PRESSURE TO EMPTY.
Other Precautions:DO NOT TAKE INTERNALLY. EMPTY CONTAINERS MUST NOT BE
    WASHED AND REUSED FOR ANY  PURPOSE. CONTAINERS SHOULD BE GROUNDED &
    BONDED TO THE RECEIVING CONTAINER. DO  NOT WELD, CUT, BRAZE ON
    EMPTY CONTAINER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:RESTRICTED AREAS USE A NIOSH APPROVED CHEMICAL
    CARTRIDGE RESPIRATOR.	     SPRAYING USE A MECHANICAL
    PREFILTER.						  CONFINED
    AREAS USE A NIOSH/MSHA APPROVED  AIR SUPPLIED RESPIRATOR..
Ventilation:GENERAL DILUTION AND LOCAL EXHAUST
Protective Gloves:IMPERMEABLE GLOVES
Eye Protection:WEAR SAFTEY SPECTACLES
Other Protective Equipment:NOT LIKELY NEEDED
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:175F-246F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THEN ETHER
Percent Volatiles by Volume:72

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS
Stability Condition to Avoid:AVOID EXCESSIVE HEAT AND SOURCES OF
    IGNITION.
Hazardous Decomposition Products:BURNING,INCLUDING WHEN HEATED BY
    WELDING OR CUTTING, WILL PRODUCE SMOKE, CARBON MONOXIDE AND CARBON
    DIOXIDE.
Conditions to Avoid Polymerization:KEEP AWAY FROM HEAT SPARKS AND FLAME

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/FEDERAL, STATE AND LOCAL
     REGULATIONS. INCINERATE ONLY IN EPA PERMITTED FACILITY. DO NOT
    INCINERATE CLOSED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***