=====================  Product Identification  =====================

MSDS NAME:FUEL, ENGINE PRIMER TYPE II
NIIN:00-823-7861
MSDS Number: BHMWC
=== Responsible Party ===
Company:SPRAY PRODUCTS CORPORATION
Box:737
City:NORRISTOWN
State:PA
ZIP:19404
Country:US
Info Phone Num:(215) 277-1010
Emergency Phone Num:(800) 424-9300 CHEMTREC
CAGE:12625
=== Contractor Identification ===
Company:SPRAY PRODUCTS CORPORATION
Address:CONSHOHOCKEN RD
Box:737
City:NORRISTOWN
State:PA
ZIP:19404
Country:US
Phone:610-277-1010
CAGE:12625

=============  Composition/Information on Ingredients  =============

Name:ETHYL ETHER  (SARA III)
CAS:60-29-7
RTECS #:KI5775000
Fraction by Wt: 60%
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400PPM/500STEL; 9192
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Name:N-HEPTANE
CAS:142-82-5
RTECS #:MI7700000
Fraction by Wt: 33%
OSHA PEL:500 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9293

Name:CARBON DIOXIDE
CAS:124-38-9
RTECS #:FF6400000
Fraction by Wt: 6%
OSHA PEL:5000 PPM
ACGIH TLV:5000PPM/30000STEL;93

Name:UPPER CYLINDER LUBRICANT
Fraction by Wt: 1%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:REPEATED AND PROLONGED EXPOSURE TO
    SOLVENTS MAY CAUSE PERMANENT BRAIN AND	 NERVOUS SYSTEM DAMAGE.
Effects of Overexposure:INHALATION:  MAY CAUSE HEADACHE, DIZZINESS,
    NAUSEA, AND LOSS OF CONSCIOUSNESS.	MAY CAUSE CENTRAL NERVOUS
    SYSTEM DEPRESSION AND IRRITATE MUCOUS MEMBRANES OF THERESPIRATORY
    TRACT.  SKIN:  MAY CAUSE DEF ATTING AND DRYING OF THE SKIN.

=======================  First Aid Measures  =======================

First Aid:INHALATION:  REMOVE TO FRESH AIR.  IF BREATHING HAS STOPPED
    GIVE ARTIFICIAL	RESPIRATION.  SKIN:  WASH WITH SOAP AND WATER. 
    REMOVE CONTAMINATED CLOTHING.   EYES:  FLUSH WITH WATER FOR 15
    MINUTES,  IF IRRITATION PERSISTS, CALL PHYSICIAN.INGESTION:  DO NOT
    INDUCE VOMITING.  CALL PHYSICIAN IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:-49F/>-44.44C
Lower Limits:1.85
Upper Limits:48
Extinguishing Media:FOAM, DRY CHEMICALS, CO2
Fire Fighting Procedures:HANDLE AS EXTREMELY FLAMMABLE LIQUID, COOL
    CONTAINERS EXPOSED TO HEAT WITH WATERUSE AIR-SUPPLIED BREATHING
    EQUIPMENT FOR ENCLOSED AREAS.
Unusual Fire/Explosion Hazard:CONTENTS UNDER PRESSURE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE SOURCES OF HEAT OR IGNITION. 
    VENTILATE AREA.  APPLY ABSORBENT MATERIAL TO SPILL AREA.

======================	Handling and Storage  ======================

Handling and Storage Precautions:EXTREMELY FLAMMABLE.  STORE AND USE
    AWAY FROM ALL HEAT AND IGNITION SOURCES.  USE ADEQUATE VENTILA-
    TION, HAZARDOUS WAST NUMBER U117,D001
Other Precautions:CONTENTS UNDER PRESSURE.  DO NOT STORE ABOVE 120F. 
    DO NOT PUNCTURE OR		INCINERATE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR RESPIRATOR IF
    VENTILATION IS INADEQUATE.
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) IF REQUIRED.
Protective Gloves:NEOPRENE IF SUBJECTED TO EXPOSURE
Eye Protection:CHEMICAL GOGGLES OR SAFETY GLASSES
Other Protective Equipment:NONE
Work Hygienic Practices:AVOID BREATHING VAPOR AND EYE AND SKIN
    EXPOSURE.  KEEP OUT  OF REACH OF CHILDREN.
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

HCC:V3
Boiling Pt:B.P. Text:95F
Melt/Freeze Pt:M.P/F.P Text:-177F
Vapor Pres:537
Vapor Density:2.55
Spec Gravity:.713
Evaporation Rate & Reference:37.5
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR/ETHER SMELL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:AVOID OXIDIZERS.  KEEP AWAY FROM HEAT,
    SPARKS, OR OPEN FLAMEDO NOT STORE ABOVE 120F
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE MAY BE
    FORMED DURING	 COMBUSTION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ABSORBING MATERIAL OR DEFECTIVE CONTAINERS
    SHOULD BE DISPOSED AT A RCRA APPROVED TS & D FACILITY ANDACCORDING
    TO FEDERAL, STATE AND LOCAL LAWS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***