=====================  Product Identification  =====================

MSDS NAME:600 RESIN
NIIN:00-922-3156
MSDS Number: BHMXX
=== Responsible Party ===
Company:THERMOSET PLASTICS, INC.
Address:6101 EAST 65TH STREET
Box:20902
City:INDIANAPOLIS
State:IN
ZIP:46220-0902
Country:US
Info Phone Num:DAY 317-252-8430
Emergency Phone Num:317-259-4161, NIGHT 317-769-3259
Preparer's Name:RICHARD L. WHEELER
CAGE:IO099
=== Contractor Identification ===
Company:THERMO PLASTICS, INC.
Address:5101 EAST 65TH STREET
Box:20902
City:INDIANAPOLIS
State:IN
ZIP:46220-0902
Country:US
Phone:317-259-4161(DAY) 769-3259(NIGHT)
CAGE:22156
Company:THERMOSET PLASTICS INC
Address:5101 EAST 65TH STREET
Box:20902
City:INDIANAPOLIS
State:IN
ZIP:46220-0902
Country:US
Phone:317-252-8430
CAGE:IO099

=============  Composition/Information on Ingredients  =============

Name:DIGLYCIDYL ETHER BISPHENOL A RESIN
CAS:25068-38-6
RTECS #:KC2100000

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: CAUTION! MAY CAUSE SKIN
    IRRITATION. PREVENT PROLONGED OR FREQUENT SKIN    CONTACT. EYE:
    WARNING! CAUSES EYE IRRITATION. AVOID CONTACT WITH EYES.
Effects of Overexposure:SKIN: IRRITATION  EYES:IRRITATION  INHALATION:
    NOT LIKELY A PROBLEM.	     INGESTION:  UNKNOWN.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:SKIN:WIPE OFF EXCESS CONTAMINATION. REMOVE ANY CONTAMINATED
    CLOTHING AND WASH	WITH SOAP AND WATER. EYE: IMMEDIATELY FLUSH EYE
    WITH PLENTY OF WATER FOR AT     LEAST 15 MINUTES AND GET MEDICAL
    ATTENTI ON.  INHALATION: NOT LIKELY A PROBLEM.INGESTION: IN GENERAL
    NO TREATMENT IS NECESSARY UNLESS LARGE QUANTITIES OF      PRODUCT
    ARE INGESTED, HOWEVER, GET MEDICAL ADVICE.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:480F / 298 C
Extinguishing Media:WATER FOG, FOAM, CO2, AND DRY CHEMICALS.
Fire Fighting Procedures:NO SPECIAL PROCEDURES - AVOID BREATHING SMOKE.
    SELF-CONTAINED BREATHING	     APPARATUS AND PROTECTIVE CLOTHING
    SHOULD BE WORN WHEN FIGHTING LARGE FIRES.
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARDS KNOWN TO THERMOSET
    PLASTICS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP WITH ABSORBENT OR PAPER TOWELS AND
    DISPOSEOF PROPERLY.SHUT OFF SOURCE OF LEAK,IF SAFE.DIKE,
    CONTAIN.SOAK UP WITH ABSORBENT SUCH AS CLAY,SAND. DISPOSE OF
    PROPERLY. FLUSH AREA WITH ALCOHOL	    SOLVENT, OBSERVING FIRE
    HAZARD.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER CLOSED. AVOID EXCESSIVE
    HEAT OR    COLD.AVOID MOISTURE CONTAMINATION.

=============  Exposure Controls/Personal Protection  =============

Ventilation:ROOM EXHAUST ACCEPTABLE
Protective Gloves:RUBBER OR PLASTIC.
Eye Protection:SAFETY GLASSES W/SIDESHIELDS.CHEM GOGGLE
Other Protective Equipment:APRON IF NEEDED.SAFETY SHOWER AND EYE WASH
    STATION SHOULD   BE AVAILABLE IN THE WORK AREA.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.REMOVE AND WASH
    CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>500 F
Vapor Pres:NEGLIGIBLE
Vapor Density:NA
Spec Gravity:1.16
Evaporation Rate & Reference:NA
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:AMBER,VISCOUS LIQUID
Percent Volatiles by Volume:NEG

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND BASES.
Stability Condition to Avoid:EXCESSIVE HEAT OR MOISTURE CONTAMINATION.
Hazardous Decomposition Products:CARBON MONOXIDE, ALDEHYDES AND ACIDS
    MAY BE FORMED DURING   COMBUSTION.
Conditions to Avoid Polymerization:WILL REACT EXOTHERMICALLY WHEN MIXED
    WITH ALIPHATIC AMINES, LEWIS ACIDS AND MERCAPTAN CURING AGENTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:LANDFILL OR INCINERATE IN ACCORDANCE WITH LOCAL 
     AND FEDERAL REGULATIONS.			       NO KNOWN
    ENVIRONMENTAL HAZARDS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***