===================== Product Identification =====================
MSDS NAME:AKUA FLO LO-SHEEN LATEX ENAMEL, FO-341
NIIN:00F005621
MSDS Number: BBSWP
=== Responsible Party ===
Company:DEL PAINT MFG/OKLA CITY, OK 73117
Emergency Phone Num:(405) 672-1431
CAGE:FO112
=== Contractor Identification ===
Company:DEL PAINT MFG
Address:3105 EAST RENO
Box:City:OKLAHOMA CITY
State:OK
ZIP:73117
Country:US
Phone:405-672-1431
CAGE:39934
Company:DEL PAINT MFG/OKLA CITY, OK 73117
CAGE:FO112
============= Composition/Information on Ingredients =============
Name:SODIUM SALT OF POLYMENIC CARBOXYLIC ACID (VAPOR PRESSURE =
17)
Fraction by Wt: .75%
Name:ETHYLENE GLYCOL (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 1.5%
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:2,2,4-TRIMETHYL PENEDIAOL
Fraction by Wt: .97%
===================== Hazards Identification =====================
Effects of Overexposure:PRODUCT CONSIDERED TO BE NONTOXIC. _
======================= First Aid Measures =======================
First Aid:GIVE 2 GLASSES OF WATER AND INDUCE VOMITING BY PUTTING
FINGERS DOWN THE THROAT. CALL PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICALS, ALCOHOL-TYPE FOAM.
Fire Fighting Procedures:NON-COMBUSTIBLE UNTIL WATER EVAPORATES.
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:MINOR SPILLS SHOULD BE COLLECTED FOR DISPOSAL
OR FLUSHED TO THE SEWER IF LOCAL REGULION PERMIT.
====================== Handling and Storage ======================
Handling and Storage Precautions:NONE
Other Precautions:NONE
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE REQUIRED
Ventilation:LOCAL EXHAUST OR GENERAL (DILUTION) VENT IS ACCEPTABLE.
Protective Gloves:NEOPRENE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE BATH, BARRIER CREAM FOR THE HANDS MAY BE
USEFUL.
Supplemental Safety and Health
MSDS DATED: 5/1/85. WT/GAL: 10.54
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:100C
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:APPRECIATE
Percent Volatiles by Volume:55.3
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE _
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:WHEN WATER IS EVAPORATED, POLYMER CAN
BURN & PRODUCE CO/CO2.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL OF WASTE MATERIAL MUST COMPLY WITH
FEDERAL, STATE, AND LOCAL REGULATION. IF APPROVED IT MAY BE REMOVED
TO LICENSED, LAND FILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|