=====================  Product Identification  =====================

MSDS NAME:RP-6007 (PART A)
NIIN:00F006100
MSDS Number: BBTXJ
=== Responsible Party ===
Company:COMMUNICATIONS TECH CORP/LOS ANGELES, CA 90064
Emergency Phone Num:(213) 473-5024
CAGE:57412
=== Contractor Identification ===
Company:COMMUNICATIONS TECHNOLOGY CORP
Address:4100 MCEWEN DR SUITE 244
Box:City:DALLAS
State:TX
ZIP:75244
Country:US
CAGE:57412

=============  Composition/Information on Ingredients  =============

Name:METHYLENE BISPHENYL ISOCYANATE (MDI)  (SARA III)
CAS:101-68-8
RTECS #:NQ9350000
Fraction by Wt: 80%
OSHA PEL:C, 0.02 PPM
ACGIH TLV:0.005 PPM; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Effects of Overexposure:BREATHLESSNESS, CHEST DISCOMFORT, REDUCED
    PULMONARY FUNCTION, SKIN & EYE IRRITATION.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN OR ARTIFICIAL
    RESPIRATION. INGESTION: GIVE PLENTY OF WATER. INDUCE VOMITING. CALL
    PHYS. SKIN: WASH W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING.
    EYES: FLUS H W/WATER FOR AT LEAST 15 MINS. CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:345F (OC)
Extinguishing Media:DRY CHEMICAL, CO2, WATER-FOG OR CHEMICAL FOAM
Fire Fighting Procedures:FIRE FIGHTERS PROTECTION SHOULD INCLUDE SCBA.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:IN SPILL, ADD WATER (PREFERABLY WITH 10%
    AMMONIA & DETERGENT) OVER SPILL. LET STAND R 30 MINS, THEN FLUSH
    W/WATER TO CHEMICAL SEWER OR ABSORB W/SWEEPING COMUND FOR DISPOSAL
    IN DRUMS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:WARNING: CAUSES IRRITATION. HARMFUL IF
    INHALED. AVOID BREATHING VAPORS. AVOID CONTACT W/EYES, IN &
    CLOTHING. USE W/ADEQUATE VENTILATION.
Other Precautions:WASH THOROUGHLY AFTER HANDLING. STORE IN ORIGINAL
    SEALED CONTAINERS. KEEP CONTAINER CLOSED. STORE AT 75F TO 85F IN A
    DRY PLA. WATER CONTAMINATION MAY RESULT IN DANGEROUS PRESSURE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED ORGANIC CARTRIDGE RESPIRATOR.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:IMPERVIOUS SYNTHETIC GLOVES
Supplemental Safety and Health
MSDS UNDATED.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text: 325F
Vapor Pres:<.1
Vapor Density:>1.0
Spec Gravity:1.18
Evaporation Rate & Reference:NONE
Solubility in Water:REACTS
Appearance and Odor:LIGHT YELLOW, SLIGHT ODOR.
Percent Volatiles by Volume:0%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING & LEWIS ACIDS/METAL-ORGANIC CPDS, WATER, ALCOHOL.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT FOR LONG PERIODS OF
    TIME.
Hazardous Decomposition Products:>500F CO, BENZENE, TOLUENE, NOX, HCN.
Conditions to Avoid Polymerization:MOISTURE CONTAMINATION MAY FORM CO2
    GAS PRESSURE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONSULT LOCAL OR CORPORATE PERSONNEL FOR METHOD
    WHICH WILL COMPLY WITH LOCAL, STATE AND FEDERAL HEALTH
    ENVIRONMENTAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***