=====================  Product Identification  =====================

MSDS NAME:TITANIUM MOLYBDENUM NICKEL ALLOY, 450
NIIN:00F006080
MSDS Number: BBTWL
=== Responsible Party ===
Company:RMI TITANIUM CO
Address:1000 WARREN AVE
Box:269
City:NILES
State:OH
ZIP:44446-1168
Country:US
Info Phone Num:216-544-7802
Emergency Phone Num:216-544-7655
Preparer's Name:MICHAEL C MILLER
CAGE:DO815
=== Contractor Identification ===
Company:RMI TITANIUM CO
Address:1000 WARREN AVE
Box:City:NILES
State:OH
ZIP:44446
Country:US
Phone:330-544-7710; 216-544-7802 TECH#
CAGE:99403
Company:RMI TITANIUM CO
Address:1000 WARREN AVE
Box:269
City:NILES
State:OH
ZIP:44446-1168
Country:US
Phone:216-652-9951
CAGE:DO815

=============  Composition/Information on Ingredients  =============

Name:MOLYBDENUM (SOLUBLE COMPOUND), LEAD MOLYBDATE
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 0.3%
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM

Name:NICKEL (SOLUBLE) (SUSPECTED HUMAN CARCINOGEN BY NTP, IARC,
    ACGIH) INTENDED CHANGE (IC)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 0.8%
Other REC Limits:1 MG/CUM
OSHA PEL:1 MG/CUM
ACGIH TLV:0.05 MG/CUM IC

Name:TITANIUM (DRY POWDER) (TI)
CAS:7440-32-6
RTECS #:XR1700000
Fraction by Wt: 98.9%
OSHA PEL:10 MG/CUM AS TIO2
ACGIH TLV:10 MG/CUM AS TIO2

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:YES    IARC:YES
Health Hazards Acute and Chronic:MOLYBDENUM: LOW ORDER OF TOXICITY.
    NICKEL: SENSITIZATION DERMATITIS, RESPIRATORY IRRITATION, ASTHMA,
    PULMONARY FIBROSIS, EDEMA & MAY CAUSE NASAL & LUNG CANCER IN
    HUMANS. TITANIUM: PHYSICAL ABRASION TO  SKIN, PARTICULATE
    IRRITATION TO EYES.
Explanation of Carcinogenicity:SEE INGREDIENTS
Medical Cond Aggravated by Exposure:DISORDERS OF THE RESPIRATORY
    SYSTEM, SKIN PROBLEMS OR SENSITIZATIONS.

=======================  First Aid Measures  =======================

First Aid:FOR OVEREXPOSURE TO AIRBORNE FUMES & PARTICULATES GENERATED
    DURING VARIOUS MILLING OPERATIONS, REMOVE EXPOSED PERSON TO FRESH
    AIR. IF BREATHING IS DIFFICULT OR HAS STOPPED, ADMINISTER
    ARTIFICIAL RESP  OR OXYGEN AS INDICATED. SEEK MEDICAL ATTENTION
    IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:USE EXTINGUISHERS DESIGNED FOR METAL FIRES, DRY
    CHEMICAL POWDERS, SALTS OR INERT GASES.
Fire Fighting Procedures:THE APPLICATION OF WATER TO BURNING TITANIUM
    CAN CAUSE AN EXPLOSION DUE TO THE EVOLUTION OF HYDROGEN GAS.
Unusual Fire/Explosion Hazard:GRINDING/POLISHING IN THE ABSENCE OF
    OXYGEN, SUCH AS UNDER WATER, CAN RESULT IN A FINELY DIVIDED WASTE
    WHICH IS EASILY IGNITED W/A FLAME OR SPARK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SHOULD SPILLS OF THE DUST OCCUR COLLECT THE
    MATERIAL IN APPORPRIATELY LABELED CONTAINERS & DISPOSE OF PROPERLY.
    DON'T USE COMPRESSED AIR TO CLEAN SPILLS OF THE DUST. WEAR
    PROTECTIVE EQUIPMENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP WORK AREAS FREE OF THE WASTE.
    STORE WET . KEEP AWAY FROM HEAT, OPEN FLAME. MAINTAIN HUMIDITY
    ABOVE 50% TO PREVENT AN ELECTROSTATIC BUILD UP.
Other Precautions:NO SMOKING IN AREA. USE NON-SPARKING METAL EQUIPMENT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:RESPIRATOR RECOMMENDED FOR ALL GRINDING,
    CUTTING, ETC. CONSULT LOCAL SUPPLIER FOR SELECTION OF APPROPRIATE
    NIOSH/MSHA APPROVED RESPIRATOR BASED ON MAGNITUDE & DURATION OF
    EXPOSURE.
Ventilation:ADEQUATE GENERAL &/OR LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:PROTECTIVE CLOTHING
Supplemental Safety and Health
PRODUCTS UNDER NORMAL CONDITIONS DON'T PRESENT AN INHALATION/INGESTION
    OR CONTACT HEALTH HAZARD. HOWEVER,
    BURNING/WELDING/SAWING/BRAZING/GRINDING/POSSIBLY MACHINING, WHICH
    RESULT IN ELEVATING THE TEMP  AT OR ABOVE ITS MELTING POINT OR
    RESULTS IN THE GENERATION OF AIRBORNE PARTICULATES, MAY PRESENT
    HEALTH HAZARDS.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:1560-1840C
Appearance and Odor:GRAY METALLIC SOLID; NO ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
RED FUMING NITRIC ACID
Hazardous Decomposition Products:OXIDE BY PRODUCTS OF THE LISTED
    HAZARDOUS INGREDIENTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***