=====================  Product Identification  =====================

MSDS NAME:ALLOY RENE 41
NIIN:00F006105
MSDS Number: BBTXQ
=== Responsible Party ===
Company:G & S TITANIUM, INC/WOOSTER, OH 44691
Emergency Phone Num:(216) 263-0564
CAGE:FO168
=== Contractor Identification ===
Company:G & S TITANIUM INC
Address:1550 SPRUCE ST
Box:City:WOOSTER
State:OH
ZIP:44691
Phone:(216) 263-0564
CAGE:1EW28
Company:G & S TITANIUM, INC/WOOSTER, OH 44691
CAGE:FO168

=============  Composition/Information on Ingredients  =============

Name:CHROMIUM  (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 19%
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:COBALT  (SARA III)
CAS:7440-48-4
RTECS #:GF8750000
Fraction by Wt: 11%
OSHA PEL:0.1 MG/M3;AS CO
ACGIH TLV:0.05 MG/M3;DUST 9293

Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 10%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9293

Name:NICKEL  (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 55%
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 3%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

=====================  Hazards Identification  =====================

Effects of Overexposure:NAUSEA; TIGHTNESS OF CHEST; FEVER; EYES, NOSE,
    THROAT, OR SKIN IRRIT; LOSS OF CONSCIOUSNESS/DEATH.

=======================  First Aid Measures  =======================

First Aid:SKIN: BRUSH OFF SKIN & CLOTHING. WASH W/SOAP & WATER. WOUNDS:
    REMOVE METALLIC PARTICLES & CLEANSE. INGESTION: SEEK PROMPT MEDICAL
    ATTENTION. EYES: FLUSH W/WATER. SEEK MEDICAL ATTENTION. INHALATION:
    RE MOVE TO FRESH AIR. GIVE OXYGEN IF NEEDED.

=====================  Fire Fighting Measures  =====================

Flash Point:NONFLAMMABLE.
Extinguishing Media:SAND, DOLOMITE, GRAPHITE POWDER, OR SODIUM
    CHLORIDE.
Unusual Fire/Explosion Hazard:MODERATE FIRE & EXPLOSIVE HAZARD WHEN
    EXPOSED TO HEAT, FLAME, ELECTRIC CURRENT, OR SPARK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:RESIDUE FROM CUTTING OR GRINDING SHOULD BE
    SWEPT OR VACUUMED & PLACE IN SUITABLE CONINERS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PREVENT ACCUMULATION OF DUST,
    GRINDINGS, ETC. THROUGH THE USE OF GOOD HOUSEKEEPING PRACTICES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF >TLV, USE OSHA APPROVED RESPIRATOR.	      
    _
Ventilation:PROVIDE EXHAUST VENTILATION TO KEEP