=====================  Product Identification  =====================

MSDS NAME:NICKEL BASE ALLOY 718
NIIN:00F006087
MSDS Number: BBTWS
=== Responsible Party ===
Company:G & S TITANIUM, INC/WOOSTER, OH 44691
Emergency Phone Num:(216) 263-0564
CAGE:FO168
=== Contractor Identification ===
Company:G & S TITANIUM INC
Address:1550 SPRUCE ST
Box:City:WOOSTER
State:OH
ZIP:44691
Phone:(216) 263-0564
CAGE:1EW28
Company:G & S TITANIUM, INC/WOOSTER, OH 44691
CAGE:FO168

=============  Composition/Information on Ingredients  =============

Name:CHROMIUM  (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 18%
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 3%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9293

Name:TANTALUM
CAS:7440-25-7
RTECS #:WW5505000
Fraction by Wt: 5%
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3; DUST; 9192

Name:IRON OXIDE
CAS:1309-37-1
RTECS #:NO7400000
Fraction by Wt: 19%
OSHA PEL:10 MG/M3 (FE)
ACGIH TLV:5 MG/M3(FE),B2; 9293

Name:NICKEL  (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 54%
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192

=====================  Hazards Identification  =====================

Effects of Overexposure:METALLIC TASTE/NAUSEA/TIGHTNESS OF
    CHEST/FEVER/IRRIT OF EYES, NOSE, THROAT & SKIN.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. IF VICTIM IS UNCONSCIOUS,
    ADMINISTER OXYGEN. SKIN: BRUSH OFF SKIN & CLOTHING. WASH W/SOAP &
    WATER. CLEANSE WOUNDS. EYES: FLUSH WITH WATER. SEEK MEDICAL
    ATTENTION. INGE STION: SEEK MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:NONFLAMMABLE
Extinguishing Media:SAND, DOLOMITE, GRAPHITE POWDER, OR SODIUM
    CHLORIDE.
Unusual Fire/Explosion Hazard:MODERATE FIRE & EXPLOSIVE HAZARD WHEN
    EXPOSED TO HEAT, FLAME, ELECTRIC CURRENT, OR SPARK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:RESIDUE FROM CUTTING OR GRINDING SHOULD BE
    SWEPT OR VACUUMED & PLACE IN SUITABLE CONINERS.		       
					       _		       
						  _

======================	Handling and Storage  ======================

Handling and Storage Precautions:PREVENT ACCUMULATION OF DUST,
    GRINDINGS, ETC. THROUGH THE USE OF GOOD HOUSEKEEPING PRACTICES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF TLV ARE EXCEEDED, USE OSHA APPROVED
    RESPIRATOR.
Ventilation:PROVIDE EXHAUST VENTILATION TO KEEP