Search   
MSDS  
:
 KEMTRONIC, KO41
CAS  
:
 8008-20-6
75-09-2
NAME  
:
 kerosene; (coal oil)
mineral seal oil
methylene chloride (sara iii)
=====================  Product Identification  =====================

MSDS NAME:KEMTRONIC, KO41
NIIN:00F006096
MSDS Number: BBTXD
=== Responsible Party ===
Company:KEM MFG CORP/TUCKER, GA 30085
Emergency Phone Num:(212) 438-4144
CAGE:FO170
=== Contractor Identification ===
Company:KEM MANUFACTURING CORPORATION
CAGE:58399
Company:KEM MFG CORP/TUCKER, GA 30085
CAGE:FO170

=============  Composition/Information on Ingredients  =============

Name:KEROSENE; (COAL OIL)
CAS:8008-20-6
RTECS #:OA5500000
ACGIH TLV:100 MG/CUM

Name:MINERAL SEAL OIL
ACGIH TLV:5 MG/CUM

Name:METHYLENE CHLORIDE	(SARA III)
CAS:75-09-2
RTECS #:PA8050000
OSHA PEL:500 PPM/C,1000; Z2
ACGIH TLV:50 PPM, A2; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:CNS DEPRESSION, HEADACHE, DIZZINESS, NAUSEA,
    IRRITATION OF SKIN & MUCOSA.

=======================  First Aid Measures  =======================

First Aid:INHALATION: MOVE TO FRESH AIR. KEEP WARM. ARTIFICIAL
    RESPIRATION OR OXYGEN IF NEEDED. INGESTION: DON'T INDUCE VOMITING.
    KEEP WARM & QUIET. GET MED ATTN. SKIN/EYES: FLUSH W/WATER FOR 15
    MIN. IF IRRITAT ION PERSISTS, GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:212F (TCC)
Extinguishing Media:DRY CHEMICAL, CO2, WATER SPRAY
Fire Fighting Procedures:BOOTS, SUITS, GLOVES, HARDHAT, FACESHIELD,
    SCBA.
Unusual Fire/Explosion Hazard:WATER COOL TO AVOID STEAM GENERATION.
    STEAM COULD HAVE EXPLOSION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION & ELIMINATE
    IGNITION SOURCES. WEAR PERSONAL PROTECTION. KE AREA & PUMP INTO
    METAL CONTAINER. REMAINDER ABSORB W/SAWDUST & PLACE  METAL
    CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE INDOORS BETWEEN 35F & 125F. BEST
    KEPT <75F IN COOL, DRY PLACE. KEEP AWAY FROM CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:RESPIRATOR MAY BE WORN BY SENSITIVE PEOPLES
Ventilation:LOCAL EXHAUST
Protective Gloves:RUBBER/VINYL
Eye Protection:GOGGLES
Other Protective Equipment:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
    _
Supplemental Safety and Health
MSDS DATED: 08/28/87

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:400F
Spec Gravity:1.144
Evaporation Rate & Reference:(N BU AC = 1): 1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OPAQUE AMBER, SWEET ODOR.
Percent Volatiles by Volume:92%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:HCL, CHLORINE, PHOSGENE

====================  Disposal Considerations  ====================

Waste Disposal Methods:RECLAIM OR DISPOSE OF IAW FEDERAL, STATE, &
    LOCAL AUTHORITIES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
PRY CLEANER 144-62-7
TT-P-86 TYPE RED LEAD PRIMER 1314-41-6
8030-30-6
61789-51-3
NOX RUST X-485
RP 3253 HARDENER 111-40-0
RP 3253 RESIN 1317-65-3
7439-89-6
25068-38-6
2426-08-6
PETRO AS SPECIAL POWDER, AO102001
102 0643 ETHYL ORANGE
SODIUM TETRAPHENYLBORON
CERIC AMMONIUM NITRATE, REAGENT
LOW ODOR 410 RESATURANT (ASBESTOS-FREE) 8030-30-6
ALUMINA BRICK 1332-58-7
14808-60-7
DESMODUR N-100, D-113 822-06-0
DESMODUR N-3300, DA-17 822-06-0
PR-851, PART A 9016-87-9
101-68-8
PR-851, PART B 75-69-4
TITANIUM MOLYBDENUM NICKEL ALLOY, 450 7439-98-7
7440-02-0
7440-32-6
TITANIUM MANGANESE ALLOY, 481 7439-96-5
7440-32-6
R.P. X-RAY DEV/REPL-PART C 7732-18-5
111-30-8
7681-57-4
COLD PARTS CLEANER, SS&C D1044 BLEND 1330-20-7
75-09-2
1319-77-3
67-56-1
NICKEL BASE ALLOY 718 7440-47-3
7439-98-7
7440-25-7
1309-37-1
7440-02-0
NON-DETERGENT SAE 40 & 0918
AISI/SAE GRADES 10-93, CARBON/ALLOY/STEELS 1309-37-1
7440-47-3
7440-50-8
7439-98-7
TURCO 5351 75-09-2
108-95-2
7775-11-3
INCONEL FILLER METAL 69 7429-90-5
7440-02-0
13463-67-7
7440-47-3
1309-37-1
COATED ABRASIVES-SILICON CARBIDE
RP-6004 PART A 101-68-8
RP-6004 PART B
KEMTRONIC, KO41 8008-20-6
75-09-2
LIQUITEX ACRYLIC COLORS
EPOXY RESURFACER, CEX-252 2426-08-6
RP-6007 (PART A) 101-68-8
RP-6007 (PART B) 7439-97-6
EPK-KAOLIN 1332-58-7
14808-60-7
XX4,32,203,503,504,600,601; ACTOX-14,214 1314-13-2
7439-92-1
7440-43-9
5W039 PACKAGING ADHESIVE, 45317 74-98-6
110-54-3
75-09-2
75-28-5
ALLOY RENE 41 7440-47-3
7440-48-4
7439-98-7
7440-02-0
13463-67-7
ALLOY U520 7440-47-3
7440-48-4
7439-98-7
7440-02-0
13463-67-7
WASPALOY 7440-47-3
7440-48-4
7439-98-7
7440-02-0
13463-67-7
ALLOY X-750 7440-47-3
1309-37-1
7440-02-0
13463-67-7
ALLOY 901 7439-98-7
7440-02-0
13463-67-7
1309-37-1
ALLOY HB 1309-37-1
7439-98-7
7440-02-0
ALLOY HB2 1309-37-1
7439-98-7
7440-02-0
ALLOY C276 7440-47-3
1309-37-1
7439-98-7
7440-02-0
7440-33-7
ALLOY HG, HG3 7440-47-3
7440-48-4
1309-37-1
7439-98-7
7440-02-0
ALLOY HW 7440-02-0
7440-47-3
1309-37-1
7439-98-7
ALLOY HX 7440-47-3
7440-50-8
1309-37-1
7439-98-7
7440-02-0
ALLOY C263 7440-47-3
7440-48-4
7439-98-7
7440-02-0
13463-67-7
ALLOY 600 7440-47-3
1309-37-1
7440-02-0
ALLOY 625 7440-47-3
7439-98-7
7440-02-0
7440-25-7
ALLOY 400 1309-37-1
7439-96-5
7440-02-0
7440-50-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net