Temp Bond N.E. Accelerator
Material Safety Data Sheet for:
Kerr Italia SpA
MATERIAL SAFETY DATA SHEET
in accordance with communitary directive 2001/58/EC
Section I - Identification of Product and Company
Trade Product Name: Preparation/Revision Date:
Temp Bond N.E. Accelerator 11/03
Emergency phone:
Company Name:
(+41)-91-61.00.639
Kerr Italia S.p.A.
Information phone:
Company Address:
00-800-41-050-505
掳
Via Passanti N掳 332 - Scafati (SA) - 84018 - Italy
Section II - Composition/Information on Ingredients
HAZARDOUS INGREDIENTS % SYMBOL R CAS N. EINECS N.
2-Ethoxybenzoic Acid 15-16 Xn 20/21/22-36/37/38 134-11-2 205-130-3
n-Octanoic acid (caprylic acid) 20-23 Xn; C 20/21/22-34-41 124-07-2 204-677-5
Section III - Hazards Identification
HAZARD CLASSIFICATION Corrosive and harmful
Section IV - First Aid Measures
Treatment for Eye Contact: Flush eye with water for at least 15 minutes.
Treatment for Skin Contact: Wash immediately with soap and water.
Treatment for Inhalation (Breathing): Remove to fresh air. If breathing is difficult, contact a physician.
Treatment for Ingestion (Swallowing): Consult Physician.
Section V - Firefighting Measures
Suitable extinguishing media: Water spray
Forbidden extinguishing media: Not available
Special firefighting measures: Wear protective clothes to prevent contact skin and eyes.
Unusual fire and explosion hazards: Unknown.
Page 1 of 5
Temp Bond N.E. Accelerator
Material Safety Data Sheet for:
Special protection equipment: Not applicable.
Page 2 of 5
Temp Bond N.E. Accelerator
Material Safety Data Sheet for:
Section VI - Accidental Release Measures
Personal Precautions: Use precautions listed in Section VIII.
Environmental Precautions: None.
Reclaiming Methods: Wipe up with paper towels and dispose of in a suitable container.
Section VII - Handling and Storage
Handling Precautions: Replace cap tightly on tubes after use.
Precautions in case of Fire and Explosion: None
Storage Conditions: None
Suggested container(s): The original container provided by the manufacturer.
Indication for Combined Storage: Avoid contact with strong oxidizing agents.
Other Precautions: Use according to directions. Do not reverse caps on tubes as this will cause hardening
of material in the tubes.
Section VIII - Exposure controls/personal protection
Precautionary Ventilation
Measures Local Exhaust Ventilation: Not needed
Special Ventilation: None
Mechanical (General) Ventilation: Not needed
Other Ventilation: None.
Limits TWA: Not established; PEL: Not established
Respiratory Avoid breathing of vapors. Use in a well ventilated room.
Protection
Hands Protection Use chemical resistant gloves.
Eyes Protection Safety glasses.
Skin Protection Handle in accordance with good personal hygiene practices. Avoid unnecessary
exposure.
Other Protective A lab coat is desiderable.
Equipments:
Section IX - Physical and Chemical Properties
Melting Point: Not Applicable
Boiling Point: Not Established
Specific Gravity: >1
Vapor Pressure: Not Applicable
Evaporation Rate (n-butane=1): Not Applicable Vapor Density (air=1): Not Applicable
Solubility in Water: Insoluble
Appearance and Odor (Physical Form): Amber paste with a faint odor.
Flash Point: N/A Upper explosivity limit: N/A Lower explosivity limit: N/A
Page 3 of 5
Temp Bond N.E. Accelerator
Material Safety Data Sheet for:
Section X - Stability and Reactivity
Stability: Stable
Conditions to avoid: None known
Incompatibility ( Materials to Avoid): Strong oxidizing agents
Hazardous Decomposition Products: Toxic fumes of carbon monoxide and carbon dioxide
Hazardous Polymerization Products: Will not occur
Section XI - Toxicological Information
Carcinogenic\Teratogenic: No
Effects and Hazards of Overexposure ( Acute and Chronic)
Effects and Hazards of Skin Contact: May cause skin irritation.
Effects and Hazards of Eye Contact: May cause eye irritation.
Effects and Hazards of Inhalation (Breathing): May be harmful by inhalation.
Effects and Hazards of Ingestion (Swallowing): May be harmful by ingestion.
Effects for Prolonged Exposure: Not known.
Section XII - Ecological Information
There is no specific information on the product. Use according to good working practices, avoiding release of
the product into environment.
Section XIII - Disposal Considerations
Dispose of in accordance to the local regulations.
Section XIV - Transport Information
SEA TRANSPORTATION
IMCO Number
UN Number 3265
Substance(s) determining hazard n-Octanoic acid
AIR TRANSPORTATION
ICAO/IATA Class 8
Substance(s) determining hazard n-Octanoic acid
TRANSPORTATION BY ROAD/RAILWAY
RID/ADR 8 Item 40掳 b, c Hazard Identification 80 Substance 3265 Hazard 8
Class Number Number Identification Number Label
Page 4 of 5
Temp Bond N.E. Accelerator
Material Safety Data Sheet for:
Section XV - Regulatory Information
CLASSIFICATION IN ACCORDANCE WITH EC DIRECTIVES
HAZARD IDENTIFICATION SYMBOL C; Xn
R Sentences
20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
34 Causes burns
41 Risk of serious damage to eyes.
S Sentences
26 In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice.
27 Take off immediately all contaminated clothing.
36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
Ingredients determining the label 2-Ethoxybenzoic Acid and n-Octanoic acid (caprylic acid)
Section XVI - Other Information
n-Octanoic acid (caprylic acid) LD50 (oral rat) 10080 mg/Kg
LD50 (intravenous mouse) 600 mg/Kg
LD50 (skin rabbit) > 5000 mg/Kg
CAUTION: PRODUCT FOR PROFESSIONAL USE
The information on this Safety Sheet is based on presently available data and to our best knowledge for
the correct handling of the product under normal conditions. Any use of this product in any way not
indicated on this Sheet or the use of this product together with any other process/procedure will be
exclusively under the user鈥檚 responsibility.
Page 5 of 5
|