MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION Product Code No.
Dnadetector In Situ Hybridization And Detection Kit, Peroxidase System 60-03-00
REAGENTS THAT CONTAIN HAZARDOUS MATERIALS
Reagent Product Code No.
2X Hybridization Buffer 50-86-01
Formamide 50-86-02
DEPC Water 50-86-03
Control Probe Hybridization Cocktail 60-00-08
True Blue Substrate 71-00-64
Orcein 71-01-00
Eosin (10x) 71-02-00
See Attached Material Safety Data Sheets For Reagents Listed Above
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MATERIAL SAFETY DATA SHEET
Issue Date:20 March, 2006
Revision Date: March 12, 2003
1. IDENTIFICATION Product Code No.
2X Hybridization Buffer 50-86-01
2. COMPOSITION AND INGREDIENTS INFORMATION
Reagent Weight % CAS #
Dextran Sulfate 20% 9011-18-1
3. HAZARDS IDENTIFICATION
Inhalation irritant. Skin irritant. Mucus membrane irritant.
4. FIRST-AID PROCEDURES
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. Seek medical attention if necessary.
Eye Contact: Flush eyes with copious amounts of water.
Skin Contact: Flush the skin with copious amounts of water and soap. If irritation persists, seek medical attention.
Ingestion: If conscious, rinse mouth with water. Seek medical attention.
5. FIRE FIGHTING PROCEDURES
Extinguishing Media: Water Spray, Carbon Dioxide, Dry Chemical, or appropriate foam.
Unusual Fire and Explosion Hazards: Wear self-contained breathing apparatus and appropriate clothing to prevent contact
with skin and eyes.
6. ACCIDENTAL RELEASE MEASURES
Wear respirator, goggles and gloves. Sweep up and hold for disposal. Avoid raising dust. Ventilate area and wash spill site
after material pick-up is complete.
7. EXPOSURE CONTROL (PERSONAL PROTECTIVE EQUIPMENT)
Inhalation: NIOSH/MSHA - approved respirator
Eye Contact: Safety goggles. Eye wash station.
Skin Contact: Chemical resistant gloves and appropriate clothing. Chemical shower.
8. HANDLING AND STORAGE
Store at Room Temperature.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Colorless solution.
Solubility in Water: Soluble
10. STABILITY AND REACTIVITY INFORMATION
Stable under normal conditions.
11. TOXICOLOGICAL INFORMATION
Hazardous Decomposition Products: Toxic fumes of: Carbon Monoxide, Carbon Dioxide, Sulfur Oxides
Hazardous Polymerization: Will not occur
Target Organs: Behavioral - somnolence, ataxia; Lungs, thorax or respiration - respiratory depression; see actual entry in
RTECS for complete information.
12. ECOLOGICAL INFORMATION
Data not available.
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MSDS: 2x Hybridization Buffer 50-86-01
13. DISPOSAL GUIDELINES
Observe all Federal, State, and Local laws concerning health and pollution.
14. TRANSPORT INFORMATION
Contact the shipper for specific shipping regulations in your area.
15. REGULATORY INFORMATION AND CONSIDERATIONS
This product is a mixture that may contain one or more hazardous chemicals. The hazardous ingredients listed are only those
as required by 29 CFR 1910.1200 g 2.C1
16. OTHER
The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide.
KPL shall not be held liable for any damage resulting from handling or from contact with the above product. Users should
make their own investigations to determine the suitability of the information for their particular purposes.
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MATERIAL SAFETY DATA SHEET
Issue Date:20 March, 2006
Revision Date: March 12, 2003
1. IDENTIFICATION Product Code No.
Formamide 50-86-02
2. COMPOSITION AND INGREDIENTS INFORMATION
Reagent Weight % CAS #
Formamide 100% 75-12-7
3. HAZARDS IDENTIFICATION
Teratogenic and Mutagenic in some laboratory animals.
Skin irritation / inflammation. Eye irritation possible (corneal ulceration, conjunctivitis). Respiratory tract irritation possible.
Gastrointestinal irritation possible. Systemic effects possible (depression of central nervous system).
Target Organs: Liver, Kidneys, Central Nervous System.
4. FIRST-AID PROCEDURES
Inhalation: Remove victim to fresh air and monitor for respiratory distress. If difficulty breathing occurs, seek medical
attention.
Eye Contact: Flush with copious amounts of water for at least 15 minutes. If irritation is present or vision is compromised,
seek medical attention.
Skin Contact: Wash the effected area with copious amounts of water, using soap. Remove and wash soiled clothing
before re-use.
Ingestion: DO NOT induce vomiting. If conscious, give plenty of water. Seek medical attention Immediately.
5. FIRE FIGHTING PROCEDURES
Extinguishing Media: Alcohol foam, carbon dioxide and dry chemical, water spray.
Unusual Fire and Explosion Hazards: Not combustible. Wear positive-pressure self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
Wear self-contained NIOSH-approved breathing apparatus with full face piece and full protective clothing.
Remove or shut off ignition sources. Soak up spill with absorbent material. Deposit materials in the appropriate container for
removal and disposal. Clean the area with water.
7. EXPOSURE CONTROL (PERSONAL PROTECTIVE EQUIPMENT)
Inhalation: Wear self-contained NIOSH-approved breathing apparatus with full face piece. Laboratory exhaust hood or local
exhaust should be used.
Eye Contact: Safety glasses should be the minimum protection worn.
Skin Contact: Rubber gloves and full protective clothing, including lab coat should be worn.
8. HANDLING AND STORAGE
Store frozen < -50C. Keep away from heat and ignition sources. Hygroscopic - protect from moisture.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear, colorless, slightly viscous liquid.
Odor: None
Solubility in Water: Soluble
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MSDS: Formamide 50-86-02
10. STABILITY AND REACTIVITY INFORMATION
Stability: Stable under ordinary conditions of use and storage.
Incompatibility Materials to Avoid: Many oxidizing agents, acids /bases, copper, brass, bronze, Iodine, Pyridine and Sulfur
trioxide.
o
Flash Point: 154.4 C
11. TOXICOLOGICAL INFORMATION
Hazardous Thermal Decomposition Products: oxides of carbon, ammonia, hydrogen cyanide
Hazardous Polymerization: Will not occur.
12. ECOLOGICAL INFORMATION
EPA Waste Number: Not listed
Environmental Fate: Degrades rapidly in water, does not bioconcentrate in aquatic species.
13. DISPOSAL GUIDELINES
Observe all Federal, State, and Local laws concerning health and pollution.
May qualify as 鈥渟pecial medical waste鈥? in Maryland.
14. TRANSPORT INFORMATION
Shipping Designation: Does not meet the definition of a 鈥渉azardous material鈥? for US DOT transportation purposes.
Hazard Class: None
Packing Group: None assigned.
15. REGULATORY INFORMATION AND CONSIDERATIONS
This product is a mixture that may contain one or more hazardous chemicals. The hazardous ingredients listed are only those
as required by 29 CFR 1910.1200 g 2.C1
16. OTHER
The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide.
KPL shall not be held liable for any damage resulting from handling or from contact with the above product. Users should
make their own investigations to determine the suitability of the information for their particular purposes.
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MATERIAL SAFETY DATA SHEET
Issue Date:20 March, 2006
Revision Date: March 12, 2003
1. IDENTIFICATION CATALOG NO.
DEPC Treated Water 50-86-03 (Formerly 600-0006)
2. COMPOSITION AND INGREDIENTS INFORMATION
Reagent Weight % CAS #
DiEthyl PyroCarbonate 0.1 1609-47-8
3. HAZARDS IDENTIFICATION
Suspected Carcinogen. Toxic. Toxic by inhalation, skin contact, and ingestion.
4. FIRST-AID PROCEDURES
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. Seek medical attention if necessary.
Eye Contact: Flush eyes with copious amounts of water.
Skin Contact: Flush the skin with copious amounts of water and soap. If irritation persists, seek medical attention.
Ingestion: If conscious, rinse mouth with water. Seek medical attention.
5. FIRE FIGHTING PROCEDURES
Extinguishing Media: Water spray, Carbon Dioxide, Dry Chemical powder or appropriate foam.
Unusual Fire and Explosion Hazards: Wear self-contained breathing apparatus, gloves and appropriate clothing to prevent
contact.
6. ACCIDENTAL RELEASE MEASURES
Wear self-contained breathing apparatus, gloves and appropriate clothing to prevent contact. Absorb on sand or vermiculite
and place in closed containers for disposal. Ventilate area after pick-up is complete.
7. EXPOSURE CONTROL (PERSONAL PROTECTIVE EQUIPMENT)
Inhalation: NIOSH/MSHA - approved respirator
Eye Contact: Safety goggles. Eye wash station.
Skin Contact: Chemical resistant gloves and appropriate clothing. Chemical shower.
8. HANDLING AND STORAGE
Keep tightly closed. Keep away from heat and open flame. Moisture sensitive. May develop pressure.
0
Store 4 C
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Colorless liquid
Solubility in Water: Soluble
Flash Point: 鈮?69掳C
10. STABILITY AND REACTIVITY INFORMATION
Incompatibility Materials to Avoid: Strong oxidizing agents, strong acids, strong bases, strong reducing agents, ammonia.
11. TOXICOLOGICAL INFORMATION
Hazardous Decomposition Products: May decompose on exposure to moist air or water. Toxic fumes of: Carbon Monoxide
and Carbon Dioxide. DEPC may react with ammonia to form Urethane. Urethane may be a carcinogen as suggested by
animal studies.
Target Organs: Lungs, thorax (respiration), see RTECS for complete toxicological information.
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MSDS: DEPC water 50-86-03 (Formerly Catalog No. 600-0006)
12. ECOLOGICAL INFORMATION
Data not available.
13. DISPOSAL GUIDELINES
Observe all Federal, State, and Local laws concerning health and pollution.
14. TRANSPORT INFORMATION
Contact your shipper for transportation information.
15. REGULATORY INFORMATION AND CONSIDERATIONS
This product is a mixture that may contain one or more hazardous chemicals. The hazardous ingredients listed are only those
as required by 29 CFR 1910.1200 g 2.C1
16. OTHER
The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide.
KPL shall not be held liable for any damage resulting from handling or from contact with the above product. Users should
make their own investigations to determine the suitability of the information for their particular purposes.
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MATERIAL SAFETY DATA SHEET
Issue Date:21 March, 2006
Revision Date: March 12, 2003
1. IDENTIFICATION Product Code No.
Control Probe Hybridization Cocktail 60-00-08
2. COMPOSITION AND INGREDIENTS INFORMATION
Reagent Weight % CAS #
Formamide 50 75-12-7
3. HAZARDS IDENTIFICATION
Teratogenic and Mutagenic in some laboratory animals.
Skin irritation / inflammation. Eye irritation possible (corneal ulceration, conjunctivitis). Respiratory tract irritation possible.
Gastrointestinal irritation possible. Systemic effects possible (depression of central nervous system).
Target Organs: Liver, Kidneys, Central Nervous System.
4. FIRST-AID PROCEDURES
Inhalation: Remove victim to fresh air and monitor for respiratory distress. If difficulty breathing occurs, seek medical
attention.
Eye Contact: Flush with copious amounts of water for at least 15 minutes. If irritation is present or vision is compromised,
seek medical attention.
Skin Contact: Wash the effected area with copious amounts of water, using soap. Remove and wash soiled clothing before
re-use.
Ingestion: DO NOT induce vomiting. If conscious, give plenty of water. Seek medical attention immediately.
5. FIRE FIGHTING PROCEDURES
Extinguishing Media: Alcohol foam, carbon dioxide and dry chemical, water spray.
Unusual Fire and Explosion Hazards: Not combustible. Wear positive-pressure self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
Wear self-contained NIOSH-approved breathing apparatus with full face piece and full protective clothing.
Remove or shut off ignition sources. Soak up spill with absorbent material. Deposit materials in the appropriate container for
removal and disposal. Clean the area with water.
7. EXPOSURE CONTROL (PERSONAL PROTECTIVE EQUIPMENT)
Inhalation: Wear self-contained NIOSH-approved breathing apparatus with full face piece. Laboratory exhaust hood or local
exhaust should be used.
Eye Contact: Safety glasses should be the minimum protection worn.
Skin Contact: Rubber gloves and full protective clothing, including lab coat should be worn.
8. HANDLING AND STORAGE
Store frozen < -50C. Keep away from heat and ignition sources. Hydroscopic - protect from moisture.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear, colorless, slightly viscous liquid.
Odor: None
Solubility in Water: Soluble
10. STABILITY AND REACTIVITY INFORMATION
Stability: Stable under ordinary conditions of use and storage.
Incompatibility Materials to Avoid: Many oxidizing agents, acids /bases, copper, brass, bronze, Iodine, Pyridine and Sulfur
trioxide.
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MSDS: Control Probe Hybridization Cocktail 60-00-08
11. TOXICOLOGICAL INFORMATION
Hazardous Thermal Decomposition Products: oxides of carbon, ammonia, hydrogen cyanide
Hazardous Polymerization: Will not occur.
12. ECOLOGICAL INFORMATION
EPA Waste Number: Not listed
Environmental Fate: Degrades rapidly in water, does not bioconcentrate in aquatic species.
13. DISPOSAL GUIDELINES
Observe all Federal, State, and Local laws concerning health and pollution.
May qualify as 鈥渟pecial medical waste鈥? in Maryland.
14. TRANSPORT INFORMATION
Shipping Designation: Does not meet the definition of a 鈥渉azardous material鈥? for US DOT transportation purposes.
Hazard Class: None
Packing Group: None assigned
15. REGULATORY INFORMATION AND CONSIDERATIONS
This product is a mixture that may contain one or more hazardous chemicals. The hazardous ingredients listed are only those
as required by 29 CFR 1910.1200 g 2.C1
16. OTHER
The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide.
KPL shall not be held liable for any damage resulting from handling or from contact with the above product. Users should
make their own investigations to determine the suitability of the information for their particular purposes.
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION Catalog No.
TrueBlue Peroxidase Substrate or Kit 50-78-02/71-00-64/71-00-65/71-00-66/71-00-67/71-00-68
2. COMPOSITION AND INGREDIENTS INFORMATION
Reagent Weight % CAS #
鈮? 1.0%
Dimethylsulfoxide 67-68-5
鈮? 1.0%
1,2,6-Hexanetriol 106-69-4
3. HAZARDS IDENTIFICATION
Irritant
4. FIRST-AID PROCEDURES
Inhalation: Remove subject to fresh air. Seek medical attention if necessary.
Eye and Skin Contact: Flush eyes or skin with copious amounts of water. Wash contaminated clothing before reuse. Consult
a physician if irritation persists.
5. FIRE FIGHTING PROCEDURES
Extinguishing Media: Foam, Alcohol Foam, CO2, Dry Chemical and Water/Fog
Unusual Fire and Explosion Hazards: May emit toxic fumes under fire conditions.
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
6. ACCIDENTAL RELEASE MEASURES
Contain spill and then clean-up with copious amounts of water. Avoid contact with skin and clothing.
7. EXPOSURE CONTROL (PERSONAL PROTECTIVE EQUIPMENT)
Inhalation: May be harmful if inhaled in very large quantities.
Eye Contact: Direct contact with product may result in eye irritation.
Skin Contact: Prolonged and repeated contact with product may cause skin irritation.
Respiratory Protection: None required if good ventilation is maintained. Otherwise wear MSHA/NIOSH approved respirator
suitable for vapor or mist concentrations encountered.
8. HANDLING AND STORAGE
Store at room temperature (22 鈥? 28掳C).
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: May appear clear, light blue to light yellow/orange.
Melting or Freezing Point: <0掳C/32掳F (water)
Boiling Point: > 100掳C/212掳F (water)
Solubility in Water: Dilutable
10. STABILITY AND REACTIVITY INFORMATION
Stable.
11. TOXICOLOGICAL INFORMATION
Hazardous Decomposition Products: Upon evaporation of water may emit carbon monoxide, carbon dioxide, SOX
Hazardous Polymerization: Will not occur.
Incompatibility Materials to Avoid: Other strong oxidizing agents, acid chlorides, acid anhydrides.
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MSDS: TrueBlue Peroxidase Substrate or Kit 50-78-02/71-00-64/71-00-65/71-00-66/71-00-67/71-00-68
12. ECOLOGICAL INFORMATION
N/A
13. DISPOSAL GUIDELINES
Observe all Federal, State and Local laws concerning health and pollution.
14. TRANSPORT INFORMATION
N/A
15. REGULATORY INFORMATION AND CONSIDERATIONS
This product is a mixture that may contain one or more hazardous chemicals. The hazardous ingredients listed are only
those as required by 29 CFR 1910.1200 g 2.C1.
16. OTHER
The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide.
KPL shall not be held liable for any damage resulting from handling or from contact with the above product. Users should
make their own investigations to determine the suitability of the information for their particular purposes.
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MATERIAL SAFETY DATA SHEET
Issue Date:22 March, 2006
Revision Date: March 12, 2003
1. IDENTIFICATION CATALOG NO.
Orcein Counterstain 71-01-01
Reagents That Contain Hazardous Material Catalog No.
Orcein 71-01-00
2. COMPOSITION AND INGREDIENTS INFORMATION
Reagent Weight % CAS #
Acetic Acid Glacial 4.0 64-197
3. HAZARDS IDENTIFICATION
Corrosive. Harmful if inhaled. Skin irritant.
4. FIRST-AID PROCEDURES
Inhalation: Remove subject to fresh air. Seek medical attention if necessary.
Eye and Skin Contact: Flush eyes and skin with copious amounts of water. Seek medical attention if necessary.
5. FIRE FIGHTING PROCEDURES
Extinguishing Media: Water may be used to flush spills away from exposures and to dilute spills to non-flammable levels. Dry
chemical, foam or carbon dioxide.
Unusual Fire and Explosion Hazards: Vapors can flow along surfaces to distant ignition sources and flash back. Water diluted
acid can react with metals to form hydrogen gas. Wear self-contained NIOSH-approved breathing apparatus with full
facepiece and full protective clothing.
6. ACCIDENTAL RELEASE MEASURES
Contain the spill, then copious amounts of water. Wear protective equipment.
7. EXPOSURE CONTROL (PERSONAL PROTECTIVE EQUIPMENT)
Inhalation: May cause irritation of the lining of the nose, throat, and lungs. Avoid direct inhalation.
Eye Contact: Could cause eye irritation with direct contact. Wear safety eyewear.
Skin Contact: May cause skin irritation with contact. Wear protective gloves when using the solution.
Respiratory Protection: None required if proper ventilation is maintained.
8. HANDLING AND STORAGE
Store at room temperature.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Deep red solution.
Solubility in Water: Infinite in water.
10. STABILITY AND REACTIVITY INFORMATION
Stable under ordinary conditions.
11. TOXICOLOGICAL INFORMATION
Hazardous Decomposition Products: When heated to decomposition, may emit toxic gasses and vapors such as carbon
monoxide.
Hazardous Polymerization: Will not occur.
Incompatibility Materials to Avoid: Oxidizers, chromic acid, sodium peroxide, nitric acid, strong caustics, heat and flame.
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MSDS: Orcein Counterstain 71-01-00, 71-01-01
12. ECOLOGICAL INFORMATION
N/A
13. DISPOSAL GUIDELINES
Observe all Federal, State and Local laws concerning health and pollution.
14. TRANSPORT INFORMATION
N/A
15. REGULATORY INFORMATION AND CONSIDERATIONS
This product is a mixture that may contain one or more hazardous chemicals. The hazardous ingredients listed are only those
as required by 29 CFR 1910.1200 g 2.C1.
16. OTHER
The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide.
KPL shall not be held liable for any damage resulting from handling or from contact with the above product. Users should
make their own investigations to determine the suitability of the information for their particular purposes.
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MATERIAL SAFETY DATA SHEET
Issue Date:22 March, 2006
Revision Date: March 12, 2003
1. IDENTIFICATION CATALOG NO.
Eosin 71-02-00/71-02-01
2. COMPOSITION AND INGREDIENTS INFORMATION
Reagent Weight % CAS #
鈮? 5%
Eosin 17372-87-1
3. HAZARDS IDENTIFICATION
Inhalation irritant. Skin irritant. Mucus membrane irritant.
4. FIRST-AID PROCEDURES
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. Seek medical attention if necessary.
Eye Contact: Flush eyes with copious amounts of water.
Skin Contact: Flush the skin with copious amounts of water and soap. If irritation persists, seek medical attention.
Ingestion: If conscious, rinse mouth with water. Seek medical attention.
5. FIRE FIGHTING PROCEDURES
Extinguishing Media: Water Spray, Carbon Dioxide, Dry Chemical or appropriate foam.
Unusual Fire and Explosion Hazards: Wear self-contained breathing apparatus and appropriate clothing to prevent contact
with skin and eyes.
6. ACCIDENTAL RELEASE MEASURES
Wear respirator, goggles and gloves. Sweep up and hold for disposal. Avoid raising dust. Ventilate area and wash spill site
after material pick-up is complete.
7. EXPOSURE CONTROL (PERSONAL PROTECTIVE EQUIPMENT)
Inhalation: NIOSH/MSHA - approved respirator
Eye Contact: Safety goggles. Eye wash station.
Skin Contact: Chemical resistant gloves and appropriate clothing. Chemical shower.
8. HANDLING AND STORAGE
Store at room temperature.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Rust colored solution.
Solubility in Water: Soluble.
10. STABILITY AND REACTIVITY INFORMATION
Stable under normal conditions.
11. TOXICOLOGICAL INFORMATION
Hazardous Decomposition Products: Toxic fumes of Carbon Monoxide, Carbon Dioxide, Hydrogen Bromide gas
Hazardous Polymerization: Will not occur.
Incompatibility Materials to Avoid: Strong Oxidizing Agents
12. ECOLOGICAL INFORMATION
Data not available.
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
MSDS: EOSIN 71-02-00/71-02-01
13. DISPOSAL GUIDELINES
Observe all Federal, State and Local laws concerning health and pollution.
14. TRANSPORT INFORMATION
Contact the shipper for specific shipping regulations in your area.
15. REGULATORY INFORMATION AND CONSIDERATIONS
This product is a mixture that may contain one or more hazardous chemicals. The hazardous ingredients listed are only
those as required by 29 CFR 1910.1200 g 2.C1.
16. OTHER
The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide.
KPL shall not be held liable for any damage resulting from handling or from contact with the above product. Users should
make their own investigations to determine the suitability of the information for their particular purposes.
910 Clopper Road
Gaithersburg, Maryland 20878 鈥? USA
301-948-7755 鈥? 800-638-3167 鈥? FAX 301-948-0169
www.kpl.com
|