K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
K&H MS POLYMER ADHESIVE SEALANT 12.03
STATEMENT OF HAZARDOUS NATURE
Non Hazardous according to criteria of Worksafe Australia
COMPANY DETAILS
Company: K & H Surface Technologies Pty Ltd.
ACN: 004 510 918
Address: 105 South Gippsland Highway, Dandenong, Victoria, and Australia 3195.
Telephone: (03) 9792 5927. Fax: (03) 9794 5633.
Emergency Telephone Number: Business hours (03) 9792 5927. After hours (03) 5974 2727 (not 24hrs).
Ask for the Technical Manager.
IDENTIFICATION
PRODUCT NAME: K&H MS POLYMER ADHESIVE SEALANT 12.03
OTHER NAMES: Not relevant
MANUFACTURER鈥橲 PRODUCT CODE: MS1203B; MS1203G; MS1203W
UN NUMBER Not allocated
HAZCHEM CODE: Not allocated
DANGEROUS GOODS CLASS/SUBSIDARY Not allocated
RISK:
POISON SCHEDULE NUMBER: Not scheduled.
USE: Sealant
PHYSICAL DESCRIPTION/PROPERTIES
APPEARANCE Coloured creamy thixotropic paste.
VAPOUR PRESSURE (Pa or mmHg @ 20掳C): Not available
1.7 g/cm3
SPECIFIC GRAVITY:
FLASH POINT (掳 C): Not available
FLAMMABILITY LIMITS (%): Not available.
SOLUBILITY IN WATER (g/L): Immiscible.
Solid content- 鈮?98%
OTHER PROPERTIES:
INGREDIENTS
CHEMICAL ENTITY CAS No. PROPORTIONS
Bis (2,2,6,6-tetramethyl-4-piperidyl) 52829-07-9 0.25 -1%
sebacate 258-207-9
Limestone 1317-65-3 >10 %
215-279-6
Stearic acid 57-11-4 >1 %
200-313-4
Ingredients determined to be non to 100%
DATE OF ISSUE: 26th May 2005
MSDS NO:00-1 PAGE 1 of 3
K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
K&H MS POLYMER ADHESIVE SEALANT 12.03
hazardous
HEALTH HAZARD INFORMATION
HEALTH EFFECTS
ACUTE
SWALLOWED Ingestion may cause irritation in mouth and stomach.
EYE May cause slight irritation if comes in contact with eyes.
SKIN Irritant, may be irritating to the skin. Can cause allergic type reactions on
sensitive people
INHALED Inhalation of vapours may be irritating to the nose. May cause
sensitisation.
CHRONIC Skin contact results in loss of natural oils and often results in a
characteristic dermatitis.
FIRST AID:
SWALLOWED If swallowed, give a glass of water. Do not induce vomiting. Lean victim
forward to reduce the risk of aspiration. Never give drink to unconscious
person. Seek medical advice. For further advice call Poisons Information
Centre.
EYE Hold eyes open & flood with water for at least 15 minutes. Seek
immediate medical advice.
SKIN Remove contaminated clothing and wash area with soap and water. Seek
medical aid if irritation occurs.
INHALED Remove person to fresh air. Lay patient down and keep warm. If
breathing is shallow, apply oxygen and seek medical aid.
FIRST AID FACILITIES Where bodily contact may occur, an eye wash station & safety shower or
supply of clean water should be readily available.
ADVICE TO DOCTOR Treat symptomatically
PRECAUTIONS FOR USE
EXPOSURE STANDARDS There is no established TLV for this product mixture.
TWA
10 mg/ m 3
Limestone
ENGINEERING CONTROLS Use only in well ventilated areas. General exhaust ventilation is adequate
under normal operating conditions.
PERSONAL PROTECTION
RESPIRATOR TYPE (AS 1716): Wear an organic vapour respirator (conforming to AS1716) if there is a
risk of exceeding exposure standards.
GLOVE TYPE: Wear PVC or Neoprene gloves.
EYE PROTECTION: Wear safety glasses.
DATE OF ISSUE: 26th May 2005
MSDS NO:00-1 PAGE 2 of 3
K&H SURFACE
TECHNOLOGIES
PTY. LTD.
Excellence in Chemical Solutions
MATERIAL SAFETY DATA SHEET
K&H MS POLYMER ADHESIVE SEALANT 12.03
CLOTHING: Overalls and safety boots are recommended.
FLAMMABILITY
FIRE HAZARDS: Fire hazard when exposed to heat or flame. Fire will produce dense
smoke
SOURCES OF IGNITION ADVICE: Avoid all sources of ignition.
SAFE HANDLING INFORMATION
STORAGE AND TRANSPORT: Store in a cool dry area away from direct sunlight, heat, sparks and open
flames Take precautionary measures against static discharges. Keep
containers securely sealed. Store away from food items. Product is
unstable on exposure to moisture.
SPILLS AND DISPOSAL: Wear personal protective clothing as recommended above. Remove all
ignition sources and ventilate area. Contain the spill with sand, earth or
inert material. Place in a suitable inert container for waste disposal.
Dispose of in accordance with relevant local regulations. Do not empty
in drains.
LIST OF DANGEROUS COMPOSITION OR Thermal decomposition products include smoke, oxides of carbon and
COMBUSTION PRODUCTS nitrogen.
FIRE FIGHTING RECOMMENDATION Fire 鈥揻ighters and others exposed to the products of combustion should
wear self-contained breathing apparatus. Prevent spillage from entering
drains and watercourses. Cool fire exposed containers with water spray.
If safe to do so, remove containers from path of fire.
TYPES OF EXTINGUISHER / FIRE Use foam, dry chemical and carbon dioxide extinguishers water spray jet
FIGHTING AGENTS: or water haze.
EXTINGUISHING MEDIA NOT SUITABLE:: Water jet.
PRECAUTION: Fire will produce dense black smoke. Exposure to decomposition
product can cause a health hazard.
OTHER INFORMATION
None available
CONTACT POINT
Title: Technical Manager
Telephone Number: (03) 9792 5927 (Business hours 8-30 am-5.00pm Mon- Fri)
Emergency Telephone After hours (03) 5974 2727 (not 24hrs)
K&H pursues a policy of ongoing research & development aimed at product improvement and therefore may change the
formulation, specification & characteristics of the product without notice. It is user鈥檚 responsibility to verify the current
formulation, specification & characteristics of the product and to ascertain that it is suitable for an intended use or application.
All information contained in this Material Safety Data Sheet and the health, safety and environmental information are considered
to be accurate to the best of our knowledge as of the issue date specified above. However, no warranty or representation,
expressed or implied, is made as to the accuracy or completeness of the data and information contained in this data sheet.
Health and safety precautions and environmental advice noted in this data sheet may not be accurate for all individuals and/or
situations. It is the user鈥檚 obligation to evaluate and use this product safely and to comply with all applicable laws and regulations.
K&H Surface Technologies Pty Ltd accepts no responsibility for any injury, loss or damage, resulting from abnormal use of the
material, from any failure to adhere to recommendations, or from any hazards inherent in the nature of the material.
DATE OF ISSUE: 26th May 2005
MSDS NO:00-1 PAGE 3 of 3
|