MATERIAL SAFETY DATA SHEET
ARMOR-GUARD EXT. 100% ACRYLIC GLOSS Page: 1
DATE PRINTED: 04/03/2006
================================================================================
REVISION DATE: 04/03/06
PRODUCT NAME: ARMOR-GUARD EXT. 100% ACRYLIC GLOSS
PRODUCT CODE: 05-240-61
HMIS: HEALTH: 1 , FIRE: 0 , REACTIVITY: 1 , PERSONAL PROTECTION:
4 = EXTREME, 3 = HIGH, 2 = MODERATE, 1 = SLIGHT, 0 = INSIGNIFICANT, * = CHRONIC
================== SECTION I - MANUFACTURER IDENTIFICATION =================
MANUFACTURER'S NAME: Columbia Paint & Coatings
ADDRESS : N112 Haven, P.O. Box 4569
Spokane, WA 99202-4569
24 HOUR EMERGENCY PHONE NO: 800-424-9300 NAME OF PREPARER : GEO. STAVNES
INFORMATION PHONE NO : 509-535-6311
========== SECTION II - HAZARDOUS INGREDIENTS/SARA III INFORMATION =========
REPORTABLE EXPOSURE WEIGHT VAPOR PRESSURE
COMPONENTS LIMITS (TLV, PEL) CAS NUMBER PERCENT mm Hg @ TEMP (F)
--------------------------------------------------------------------------------------
---------------------------------------
* Ethylene Glycol 107-21-1 1.81 0.05 68
ACGIH: aerosol ceiling: 39.4 ppm (100 mg/m3) STEL
* Indicates toxic chemical(s) subject to the reporting requirements of section
313 of Title III of the Emergency and Community Right-to-Know Act of 1986 and of
40 CFR 372.
This product contains hazardous components which may become airborne and result
in exposure when removed by abrasive blasting, sanding, or grinding. Ventilate
and avoid breathing dust.
This product contains materials listed as hazardous air pollutants.
=============== SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS ============
BOILING RANGE (F): 212 - 471
SPECIFIC GRAVITY (H2O=1): 1.06 POUNDS PER GALLON: 8.80 lb/gl
% VOLATILE BY WT: 64.84% % VOLATILE BY VOL: 68.59%
VAPOR DENSITY: Heavier than air.
EVAPORATION RATE: Slower than n-butyl acetate.
V.O.C.(lb/gal): 1.23 lb/gl V.O.C.(g/l): 147 g/l
SOLUBILITY IN WATER: Dilutable in water.
APPEARANCE: . ODOR: Ammonia odor.
================= SECTION IV - FIRE AND EXPLOSION HAZARD DATA ==============
FLAMMABILITY CLASS:
OSHA not regulated.
FLASH POINT (F): N/A METHOD USED : N/A
FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: .62 UPPER: 4.24
EXTINGUISHING MEDIA: Foam. CO2. Dry chemical. Water fog.
MATERIAL SAFETY DATA SHEET
ARMOR-GUARD EXT. 100% ACRYLIC GLOSS Page: 2
DATE PRINTED: 04/03/2006
================================================================================
SPECIAL FIREFIGHTING PROCEDURES
Evacuate hazard area of unprotected personnel.
Full protective equipment is recommended including self contained breathing
apparatus, to protect firefighters from hazardous combustion products.
UNUSUAL FIRE AND EXPLOSION HAZARDS
Materials will not sustain combustion unless water has evaporated. Closed
containers may explode from steam pressure when exposed to extreme heat.
Vapors are heavier than air and will accumulate.
======================== SECTION V - REACTIVITY DATA =======================
STABILITY: Stable.
CONDITIONS TO AVOID
Excessive heat.
INCOMPATIBILITY (MATERIALS TO AVOID)
None reasonably foreseeable.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS
The dry paint film can burn and produce one or more of the following: Carbon
dioxide. Carbon monoxide. Oxides of nitrogen.
Acrolein.
HAZARDOUS POLYMERIZATION: Will not occur.
==================== SECTION VI - HEALTH HAZARD DATA =======================
PRIMARY ROUTES OF EXPOSURE: Dermal: X Inhalation: X Ingestion:
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Excess inhalation of vapors and/or volatilized ammonia may produce headache,
nausea, and irritation to the respiratory tract.
Excess inhalation of volatilized ethylene glycol may cause irritation of the
nose and throat with headache, nausea, and vomiting.
No chronic effects known at this time.
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Skin contact may produce irritation due to slight alkalinity.
Liquid, vapor, and mist may produce eye irritation.
Presence of volatilized ammonia may irritate the eyes.
No chronic skin effects known at this time.
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
No acute effects known at this time.
No chronic effects known at this time.
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Ingestion of ethylene glycol can be harmful or fatal. Severe kidney damage
follows the swallowing of large amounts of ethylene glycol.
No chronic effects known at this time.
MATERIAL SAFETY DATA SHEET
ARMOR-GUARD EXT. 100% ACRYLIC GLOSS Page: 3
DATE PRINTED: 04/03/2006
================================================================================
OTHER HEALTH HAZARDS (ACUTE AND CHRONIC)
No other acute effects known at this time.
No other chronic effects known at this time.
CARCINOGENICITY: CONTAINS CARCINOGENS: None known. OSHA REGULATED: Yes
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE
Ethylene glycol may aggravate existing kidney disease.
EMERGENCY AND FIRST AID PROCEDURES
If splashed into the eyes, flush eyes with clear water for 15 minutes or until
irritation subsides; consult a physician as required.
For irritation due to inhalation, remove to fresh air.
If irritation persists, consult a physician.
For skin contact, remove with soap and water.
If ingested, drink 1 to 2 glasses of water to dilute. Do NOT induce vomiting.
Consult a physician or poison control center immediately.
================== SECTION VII - SPILL OR LEAK PROCEDURES ===================
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
Wearing protective gloves, wipe up liquid with absorbent cloth.
WASTE DISPOSAL METHOD
Dispose in accordance with local, state, and federal regulations.
============== SECTION VIII - SAFE HANDLING AND USE INFORMATION ==============
RESPIRATORY PROTECTION
In restricted ventilation areas, use approved NIOSH/MSHA chemical/mechanical
filters designed to remove a combination of particulates and vapor.
Use ventilation to keep levels below exposure guidelines (see Section II.) User
should test and monitor exposure levels to insure all personnel exposure is
below guidelines. If not sure or if not able to monitor levels, use a
NIOSH/MSHA approved air purifying respirator.
VENTILATION
Provide air movement to remove excess vapors.
Ventilation and respiratory protection must be adequate to prevent the TLV's of
hazardous ingredients from being exceeded.
All application areas should be ventilated in accordance with OSHA regulations.
PROTECTIVE GLOVES
Natural rubber or latex gloves required for prolonged or repeated contact.
EYE PROTECTION
Safety glasses.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT
None reasonably foreseeable.
WORK/HYGIENIC PRACTICES
Wash hands before eating or using washroom. Smoke in smoking areas only. Wash
clothes before reuse.
===================== SECTION IX - SPECIAL PRECAUTIONS ======================
MATERIAL SAFETY DATA SHEET
ARMOR-GUARD EXT. 100% ACRYLIC GLOSS Page: 4
DATE PRINTED: 04/03/2006
================================================================================
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING
Do not store in excessive heat (above 120 deg F.) Use with adequate
ventilation.
OTHER PRECAUTIONS
Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Avoid
prolonged or repeated breathing of vapors.
WARNING! If you scrape, sand, remove old paint, you may release lead dust. LEAD
IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN
DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.
Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully
with a HEPA vacuum and a wet mop. Before you start, find out how to protect
yourself and your family by contacting the National Lead Information Hotline at
1-800-424-LEAD or log on to www.epa.gov/lead.
========================= SECTION X - DISCLAIMER ==========================
Although the information and recommendations set forth herein (hereinafter
"information") are presented in good faith and believed to be correct as of the
date of this material data sheet, Columbia Paint & Coatings makes no
representations as to the completeness and accuracy thereof. Information is
supplied upon the condition that persons receiving same will make their own
determination as to its suitability for their purposes prior to use. In no
event will Columbia Paint & Coatings be responsible for damages of any nature
whatsoever resulting from the use of, misuse or reliance upon information. No
representations, guarantees, or warranties (either expressed or implied),
merchantability, fitness for a particular purpose, or any other nature are made
hereunder with respect to information or the material to which information
refers. Regulatory requirements are subject to change and may differ from one
location to another. It is the user's sole responsibility to ensure its
activities comply with federal, state or provincial, and local laws and
regulations. This information must be included with all MSDS's that are copied
and distributed for this material.
|