1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING
PRODUCT NAME CONCRESIVE 1380 COMPONENT A
PRODUCT NO. F000064
SUPPLIER BASF Construction Chemicals UK
Albany House
Swinton Hall Road
Swinton
Manchester
M27 4DT
0161 794 7411
NOTE : In cases of emergency
outside working hours, use
Telephone Number above. Follow
instructions from recorded message.
0161 794 8547
Irritating to eyes and skin. May cause sensitisation by skin contact. Toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
CLASSIFICATION Xi;R36/38. R43. N;R51/53.
4 FIRST-AID MEASURES
INHALATION
Move the exposed person to fresh air at once. Get medical attention if any discomfort continues.
INGESTION
DO NOT INDUCE VOMITING! NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! Rinse mouth thoroughly.
Promptly get affected person to drink large volumes of water to dilute the swallowed chemical. Obtain medical advice Provide rest, warmth
and fresh air.
SKIN CONTACT
Important to remove the substance from the skin immediately. Wash the skin immediately with soap and water. Get medical attention
promptly if symptoms occur after washing. Chemical burns must be treated by a physician.
EYE CONTACT
Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids.
Continue to rinse for at least 15 minutes and get medical attention.
5 FIRE-FIGHTING MEASURES
EXTINGUISHING MEDIA
Fire can be extinguished using: Water spray. Foam, carbon dioxide or dry powder.
6 ACCIDENTAL RELEASE MEASURES
1/ 4
CONCRESIVE 1380 COMPONENT A
ENVIRONMENTAL PRECAUTIONS
Avoid subsoil penetration. Prevent product from entering drains. Do not contaminate surface water.
SPILL CLEAN UP METHODS
Soak up with inert absorbent material. Sweep up and shovel into suitable containers for disposal. Wear necessary protective equipment.
7 HANDLING AND STORAGE
USAGE PRECAUTIONS
Provide sufficient air exchange and/or exhaust in work rooms. Handle and open container with care. Avoid formation of aerosol
STORAGE PRECAUTIONS
Keep away from food and drink. Keep container tightly closed at room temperature in the original container.
8 EXPOSURE CONTROLS/PERSONAL PROTECTION
PROTECTIVE EQUIPMENT
ENGINEERING MEASURES
Provide adequate general and local exhaust ventilation.
RESPIRATORY EQUIPMENT
In case of insufficent ventilation wear suitable respiratory equipment.
HAND PROTECTION
Use protective gloves.
EYE PROTECTION
Use approved safety goggles or face shield.
HYGIENE MEASURES
DO NOT SMOKE IN WORK AREA! Wash at the end of each work shift and before eating, smoking and using the toilet. Promptly remove
any clothing that becomes contaminated. Wash promptly if skin becomes contaminated. When using do not eat, drink or smoke.
9 PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE Liquid
COLOUR Yellowish
ODOUR Slightly Aromatic
SOLUBILITY Insoluble in water
BOILING POINT (掳C) > 200 RELATIVE DENSITY 1.17 (20)
VAPOUR PRESSURE Above 20 pH-VALUE, CONC. SOLUTION N/A
AUTO IGNITION
FLASH POINT (掳C) approx 150 DIN51794 approx 215 DIN51794
TEMPERATURE (掳C)
10 STABILITY AND REACTIVITY
STABILITY
Stable under normal temperature conditions.
CONDITIONS TO AVOID
Take necessary action to avoid static electricity discharge
MATERIALS TO AVOID
Strong acids and strong bases strong oxidizing agents.
SKIN CONTACT
May cause sensitisation by skin contact.
2/ 4
CONCRESIVE 1380 COMPONENT A
12 ECOLOGICAL INFORMATION
ECOTOXICITY
Avoid subsoil penetration. Do not let product enter drains. Do not contaminate surface water.
DEGRADABILITY
Not readily Biodegradable
13 DISPOSAL CONSIDERATIONS
DISPOSAL METHODS
Dispose of waste and residues in accordance with local authority requirements.
14 TRANSPORT INFORMATION
PROPER SHIPPING NAME ENVIROMENTALLY HAZARDOUS SUBSTANCE, LIQUID, NOS (Contains Epoxy resin)
UN NO. ROAD 3082 ADR CLASS NO. 9
Class 9: Miscellaneous
ADR CLASS ADR PACK GROUP 11 (c)
dangerous substances and
articles.
RID CLASS NO. 9 RID PACK GROUP 11 (c)
IMDG CLASS Not Regulated AIR CLASS Not Regulated
15 REGULATORY INFORMATION
LABELLING
Irritant Dangerous for the
environment
CONTAINS BUTANEDIOLDIGLYCIDYL ETHER
REACTION PRODUCT BISPHENOL A
REACTION PRODUCT BISPHENOL F
RISK PHRASES
R36/38 Irritating to eyes and skin.
R43 May cause sensitisation by skin contact.
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
R51/53
environment.
SAFETY PHRASES
S24/25 Avoid contact with skin and eyes.
In case of contact with eyes, rinse immediately with plenty of water and seek medical
S26
advice.
S37 Wear suitable gloves.
S57 Use appropriate containment to avoid environmental contamination.
S60 This material and its container must be disposed of as hazardous waste.
S61 Avoid release to the environment. Refer to special instructions/safety data sheets.
P5 Contains epoxy constituents. See information supplied by the manufacturer.
GUIDANCE NOTES
Workplace Exposure Limits EH40. Introduction to Local Exhaust Ventilation HS(G)37. CHIP for everyone HSG(108).
16 OTHER INFORMATION
3/ 4
CONCRESIVE 1380 COMPONENT A
ISSUED BY
EHSQ Department
REV. NO./REPL. SDS GENERATED Issue 2
SDS NO. SDS0180
DATE Sept 2006
RISK PHRASES IN FULL
R20/21 Harmful by inhalation and in contact with skin.
R36/38 Irritating to eyes and skin.
R43 May cause sensitisation by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
DISCLAIMER
This information relates only to the specific material designated and may not be valid for such material used in combination with
any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate and
reliable as of the date indicated. However, no warranty guarantee or representation is made to its accuracy, reliability or
completeness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.
4/ 4
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP