Material Safety Data Sheet
EUCO 800 - 2 GAL UNIT
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006
This is a kit that contains the following components:
EUCO 800 PART A
EUCO 800 PART B
1/13 042S 02
Material Safety Data Sheet
EUCO 800 PART A
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006
SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION
Product Information
Trade name : EUCO 800 PART A
Product code : 042S 02
Supplier : Euclid Canada
2835 Grande-All茅e
St-Hubert, QC J4T 2R4
Telephone : 1-800-667-0920
Emergency Phone: : (613) 996-6666
Preparation Information
Prepared by: : Sewnauth Raghunandan
Date: : 08/27/2006
Telephone : (416) 421-3300
SECTION 2 - HAZARDS IDENTIFICATION
Emergency Overview
Gray. Liquid solution. Vapor may irritate respiratory tract. May cause nausea, headaches, and dizziness.
Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get medical attention.
Acute Potential Health Effects/ Routes of Entry
Inhalation Vapor may irritate respiratory tract. May cause nausea, headaches, and dizziness.
:
Eyes Direct contact may cause mild irritation. May cause temporary injury.
:
Ingestion May cause gastrointestinal irritation, nausea, and vomiting.
:
Skin May cause sensitization resulting in irritation, itching and redness.
:
Aggravated Medical Conditions
Pre-existing eye, skin, liver, kidney, and respiratory disorders may be aggravated by exposure.
Chronic Health Effects
Prolonged or repeated exposure to epoxy resin can cause irritation to skin, eyes, skin sensitization, temporary
eye injury. Certain epoxy resins are reported to be mutagenic in some laboratory tests. Repeated inhalation of
nonyl phenol may cause lung damage. Repeated skin contact with nonyl phenol may cause skin irritation and
dermatitis. Fillers are encapsulated and not expected to be released from product under normal conditions of
use.
Target Organs: Skin, Eye, Ingestion, Lung
SECTION 3 : HAZARDOUS INGREDIENTS
3/13 800000050968
042S 02
Material Safety Data Sheet
EUCO 800 PART A
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006
Chemical Name CAS-No. Weight % Range
Bisphenol A Polyglycidyl Ether Resin 25068-38-6 40.0 - 70.0
4-Nonylphenol 84852-15-3 7.0 - 13.0
The ingredients listed above are hazardous as defined in the controlled products regulation. (CPR).
SECTION 4 - FIRST AID MEASURES
Get immediate medical attention for any significant overexposure.
Inhalation : Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get
medical attention.
Eye contact : Flush with water for 15 minutes. If irritation persists, get medical attention.
Skin contact : Wash area of contact thoroughly with hand cleaner followed by soap and water. If
irritation, rash or other disorders develop, get medical attention immediately.
Ingestion : Do not induce vomiting unless advised by a physician. Call nearest Poison Control
Center or Physician immediately.
SECTION 5: FIRE / EXPLOSION HAZARDS
Flash point : > 200 掳 > 93 掳
F, C
Method : Setaflash Closed Cup
Lower explosion limit : Not available.
Upper explosion limit : Not available.
Autoignition temperature : Not available.
Means of Extinction : If water fog is ineffective, use carbon dioxide, dry chemical or foam.
Hazardous combustion : Smoke, fumes.Carbon monoxide and carbon dioxide can form.
products
Protective equipment for : Water may be used to cool containers to minimize pressure build-
firefighters up.Use accepted fire fighting techniques. Wear full firefighting
protective clothing, including self-contained breathing apparatus
(SCBA).
Fire and explosion conditions : Closed container, may burst when exposed to extreme heat.Empty
containers may contain ignitable vapors.Vapor concentrations in
enclosed areas may ignite explosively.Vapors may travel to sources of
ignition and flashback.
SECTION 6 - SPILLS / LEAKS / ACCIDENTAL RELEASE MEASURES
Use appropriate protective equipment. Avoid contact with material. Remove sources of ignition immediately.
Stop flow of material if safe to do so. Contain spill and keep out of water courses. Ventilate area.
4/13 800000050968
042S 02
Material Safety Data Sheet
EUCO 800 PART A
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006
SECTION 7 - HANDLING AND STORAGE
Store under dry warehouse conditions away from heat and all ignition sources. Store in a cool, well ventilated
area. Prevent inhalation of vapor, ingestion, and contact with skin eyes and clothing. Keep container closed
when not in use. Precautions also apply to emptied containers. Do not smoke, weld, generate sparks, or use
flame near container. Change soiled work clothes frequently. Clean hands thoroughly after handling.
SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Personal protection equipment
Respiratory protection : Wear appropriate, properly fitted NIOSH/MSHA approved organic vapor or
supplied air respirator when airborne contaminant level(s) are expected to
exceed exposure limits indicated on the MSDS. Follow manufacturer's
directions for respirator use.
Hand protection : Use suitable impervious nitrile or neoprene gloves and protective apparel to
reduce exposure.
Eye protection : Chemical splash goggles.
Protective measures : Use professional judgment in the selection, care, and use.
: Use only in well ventilated areas. Provide maximum ventilation in enclosed
Engineering measures
areas.Use general ventilation and/ or local exhaust to reduce the airborne
contaminant concentration below the exposure limit listed in the MSDS
Exposure Limits
Chemical Name CAS Number Regulation Limit Form
4-Nonylphenol 84852-15-3
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State : Liquid
Form : Liquid solution
Color : Gray
Odor : Mercapto-EsterSweet
pH : Not available.
Vapour pressure : Not available.
Vapor density : Heavier than air
Melting point/range : Not available.
Freezing point : Not available.
Boiling point/range : Not available.
Water solubility : Insoluble
5/13 800000050968
042S 02
Material Safety Data Sheet
EUCO 800 PART A
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006
Evaporation Rate: : Not available.
Specific Gravity : 1.2
% Volatile Weight : 8%
SECTION 10 - REACTIVITY / STABILITY
Substances to avoid : Epoxy curing agents.Amines and oxidizing agents.
Stability : Material is stable under normal storage, handling, and use.
Hazardous polymerization : Will not occur.
SECTION 11 - TOXICOLOGICAL INFORMATION
No Data Available
SECTION 12 - ECOLOGICAL INFORMATION
No Data Available
SECTION 13 - WASTE DISPOSAL CONSIDERATIONS
Disposal Method : Waste not regulated under RCRA. Incinerate at EPA approved facility or dispose of
waste in compliance with state and local regulations.
SECTION 14 - TRANSPORTATION / SHIPPING DATA
TDG / DOT Shipping Description:
NOT REGULATED
SECTION 15 - REGULATORY INFORMATION
North American Inventories:
All components are listed or exempt from the TSCA inventory.
One or more components are listed on the NDSL.
Canadian Regulations:
WHMIS Classification : D2B
This is a "controlled product" under the Canadian Workplace Hazardous Materials Information System
(WHMIS).
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations
(CPR) and the MSDS contains all of the information required by the CPR.
Other Regulations:
6/13 800000050968
042S 02
Material Safety Data Sheet
EUCO 800 PART A
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006
When appropriately mixed with the other part, product has a VOC less water and exempt solvent of:
0.0000 g/l
SECTION 16 - OTHER INFORMATION
HMIS Rating :
Health 2 0 = Minimum
1 = Slight
Flammability 1
2 = Moderate
Reactivity 0
3 = Serious
PPE
4 = Severe
Further information:
For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the
consideration of the user, subject to their own investigation of compliance with applicable regulations, including
the safe use of the product under every foreseeable condition.
Prepared by: Sewnauth Raghunandan
Legend
ACGIH - American Conference of Governmental Hygienists OSHA - Occupational Safety and Health Administration
DOT - Department of Transportation PEL - Permissible Exposure Limit
DSL - Domestic Substance List RCRA - Resource Conservation and Recovery Act
EPA - Environmental Protection Agency STEL - Short Term Exposure Limit
HMIS - Hazardous Materials Information System TLV - Threshold Limit Value
IARC - International Agency for Research on Cancer TSCA - Toxic Substances Control Act
MSHA - Mine Safety Health Administration TWA - Time Weighted Average
NDSL - Non-Domestic Substance List V - Volume
NIOSH - National Institute for Occupational Safety and Health VOC - Volatile Organic Compound
NTP - National Toxicology Program WHMIS - Workplace Hazardous Materials Information System
7/13 800000050968
042S 02
Material Safety Data Sheet
EUCO 800 PART B
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006
SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION
Product Information
Trade name : EUCO 800 PART B
Product code : 042S 02
Supplier : Euclid Canada
2835 Grande-All茅e
St-Hubert, QC J4T 2R4
Telephone : 1-800-667-0920
Emergency Phone: : (613) 996-6666
Product use : Curative
Preparation Information
Prepared by: : Sewnauth Raghunandan
Date: : 08/27/2006
Telephone : (416) 421-3300
SECTION 2 - HAZARDS IDENTIFICATION
Emergency Overview
Gray. Liquid. May cause slight irritation to the respiratory system. Move to fresh air. If required, artificial
respiration or administration of oxygen can be performed by trained personnel. Remove to fresh air. Get
immediate medical attention.
Acute Potential Health Effects/ Routes of Entry
Inhalation May cause slight irritation to the respiratory system.
:
Eyes Vapors or liquid may cause tearing, blurred vision, severe irritation, and possible chemical
:
burns.
Ingestion May cause gastrointestinal irritation, nausea, and vomiting. May cause chemical burns to
:
stomach, mouth, nose, and throat.
Skin May cause itching, reddening, inflammation. May cause severe burns, blistering and skin
:
damage. May cause sensitization resulting in irritation, itching and redness. May cause a
rash.
Aggravated Medical Conditions
Pre-existing eye, skin and respiratory disorders may be aggravated by exposure.
Chronic Health Effects
May cause sensitization by contact. Prolonged skin contact may cause irritation, burns or dermatitis. Repeated
overexposure to vapors and/or material may injure the liver, kidneys and respiratory system unless suitable
engineering controls and/or personal protective equipment are used. May aggravate persons sensitized to
amines. Repeated inhalation of nonyl phenol may cause lung damage. Repeated skin contact with nonyl phenol
9/13 800000050969
042S 02
Material Safety Data Sheet
EUCO 800 PART B
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006
may cause skin irritation and dermatitis. Fillers are encapsulated and not expected to be released from product
under normal conditions of use.
SECTION 3 : HAZARDOUS INGREDIENTS
Chemical Name CAS-No. Weight % Range
4-Nonylphenol 84852-15-3 15.0 - 40.0
4-tert-Butylphenol 98-54-4 1.0 - 5.0
N Amino ethyl piperazine 140-31-8 0.5 - 1.5
The ingredients listed above are hazardous as defined in the controlled products regulation. (CPR).
SECTION 4 - FIRST AID MEASURES
Get immediate medical attention for any significant overexposure.
Inhalation : Move to fresh air. If required, artificial respiration or administration of oxygen can be
performed by trained personnel.Remove to fresh air. Get immediate medical
attention.
Eye contact : Flush with water for at least 15 minutes while holding eye lids apart. Get medical
attention immediately.
Skin contact : Clean area of contact thoroughly using soap and water. If irritation, rash or other
disorders develop, get medical attention immediately.
Ingestion : Do not induce vomiting unless advised by a physician. Call nearest Poison Control
Center or Physician immediately.
SECTION 5: FIRE / EXPLOSION HAZARDS
Flash point : > 200 掳 > 93 掳
F, C
Method : Setaflash Closed Cup
Lower explosion limit : Not available.
Upper explosion limit : Not available.
Autoignition temperature : Not available.
Means of Extinction : If water fog is ineffective, use carbon dioxide, dry chemical or foam.
Hazardous combustion : Carbon monoxide and carbon dioxide can form.Smoke, fumes.Nitrogen
products oxides can form.
Protective equipment for : Use accepted fire fighting techniques. Wear full firefighting protective
firefighters clothing, including self-contained breathing apparatus (SCBA).
Fire and explosion conditions : Product may ignite if heated in excess of its flash point.Vapors may
travel to sources of ignition and flashback.Vapor concentrations in
enclosed areas may ignite explosively.Empty containers may contain
ignitable vapors.
10/13 800000050969
042S 02
Material Safety Data Sheet
EUCO 800 PART B
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006
SECTION 6 - SPILLS / LEAKS / ACCIDENTAL RELEASE MEASURES
Use appropriate protective equipment. Avoid contact with material. Remove sources of ignition immediately.
Stop flow of material if safe to do so. Contain spill and keep out of water courses. Ventilate area.
SECTION 7 - HANDLING AND STORAGE
Prevent inhalation of vapor, ingestion, and contact with skin eyes and clothing. Keep container closed when
not in use. Precautions also apply to emptied containers. Do not smoke, weld, generate sparks, or use flame
near container. Do not use in confined or poorly ventilated areas. Personal protective equipment must be worn
during maintenance or repair of contaminated mixer, reactor, or other equipment. Store under dry warehouse
conditions away from heat and all ignition sources.
SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Personal protection equipment
Respiratory protection : Wear NIOSH/MSHA approved vapor respirator with appropriate cartridge
when the vapor concentration is expected to exceed exposure limits indicated
on the MSDS. Follow manufacturer's directions for respirator use.
Hand protection : Use suitable impervious nitrile or neoprene gloves and protective apparel to
reduce exposure.
Eye protection : Wear chemical safety goggles and/or face shield to prevent eye contact. Do
not wear contact lenses. Do not touch eyes with contaminated body parts or
materials. Have eye washing facilities readily available.
Skin and body protection : Prevent contact with shoes and clothing. Use rubber apron and overshoes.
Protective measures : Inspect and replace equipment at regular intervals.Use professional judgment
in the selection, care, and use.
Engineering measures : Use only in well ventilated areas. Provide maximum ventilation in enclosed
areas.Use local exhaust when the general ventilation is inadequate.
Exposure Limits
Chemical Name CAS Number Regulation Limit Form
4-Nonylphenol 84852-15-3
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State : Liquid
Form : Liquid
Color : Gray
Odor : Mercapto-EsterSweet, ethereal
pH : Not available.
11/13 800000050969
042S 02
Material Safety Data Sheet
EUCO 800 PART B
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006
Vapour pressure : Not available.
Vapor density : Heavier than air
Melting point/range : Not available.
Freezing point : Not available.
Boiling point/range : Not available.
Water solubility : Insoluble
Evaporation Rate: : Not available.
Specific Gravity : 1.2
% Volatile Weight : 21 %
SECTION 10 - REACTIVITY / STABILITY
Substances to avoid : Oxidizing agents.Epoxies.Isocyanates.Acids.
Stability : Material is stable under normal storage, handling, and use.
Hazardous polymerization : Will not occur under normal conditions.
SECTION 11 - TOXICOLOGICAL INFORMATION
No Data Available
SECTION 12 - ECOLOGICAL INFORMATION
No Data Available
SECTION 13 - WASTE DISPOSAL CONSIDERATIONS
Disposal Method : Dispose as hazardous waste according to all local, state, federal and provincial
regulations.
SECTION 14 - TRANSPORTATION / SHIPPING DATA
TDG / DOT Shipping Description:
NOT REGULATED
SECTION 15 - REGULATORY INFORMATION
North American Inventories:
All components are listed or exempt from the TSCA inventory.
One or more components are listed on the NDSL.
12/13 800000050969
042S 02
Material Safety Data Sheet
EUCO 800 PART B
Version 1.2 Print Date 07/12/2007
REVISION DATE: 08/27/2006
Canadian Regulations:
D2A, D2B, E
This is a "controlled product" under the Canadian Workplace Hazardous Materials Information System
(WHMIS).
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations
(CPR) and the MSDS contains all of the information required by the CPR.
Other Regulations:
When appropriately mixed with the other part, product has a VOC less water and exempt solvent of:
0.0000 g/l
SECTION 16 - OTHER INFORMATION
HMIS Rating :
Health 2 0 = Minimum
1 = Slight
Flammability 1
2 = Moderate
Reactivity 0
3 = Serious
PPE
4 = Severe
Further information:
For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the
consideration of the user, subject to their own investigation of compliance with applicable regulations, including
the safe use of the product under every foreseeable condition.
Prepared by: Sewnauth Raghunandan
Legend
ACGIH - American Conference of Governmental Hygienists OSHA - Occupational Safety and Health Administration
DOT - Department of Transportation PEL - Permissible Exposure Limit
DSL - Domestic Substance List RCRA - Resource Conservation and Recovery Act
EPA - Environmental Protection Agency STEL - Short Term Exposure Limit
HMIS - Hazardous Materials Information System TLV - Threshold Limit Value
IARC - International Agency for Research on Cancer TSCA - Toxic Substances Control Act
MSHA - Mine Safety Health Administration TWA - Time Weighted Average
NDSL - Non-Domestic Substance List V - Volume
NIOSH - National Institute for Occupational Safety and Health VOC - Volatile Organic Compound
NTP - National Toxicology Program WHMIS - Workplace Hazardous Materials Information System
13/13 800000050969
042S 02
|