Mainlube Superior Maintenance Lubricants Pty Ltd
14 Underwood Ave, Botany NSW, 2017
Ph 02-9700-0880. Fax 02-9700-0881.
ACN No. 001 748 876
____________________________________________________________________________________________________________
STATEMENT OF HAZARDOUS NATURE
Non Hazardous According to Criteria of Worksafe Australia
MATERIAL SAFETY DATA SHEET MAINLUBE 140
IDENTIFICATION Page 1 of 3
Aug-05
Product Name: Mainlube 140
Chemical Name: Textile Industry Lubricant.
Other Names: Not Applicable
Manufacturer鈥檚 Product Code: 140
UN Number: None Assigned
Dangerous Goods Class None Assigned
Subsidiary Risk[s]: None Assigned
Hazchem Code: None Assigned
EPG NO: None Assigned
Poisons Schedule Number: None Assigned
Toxic and Hazardous
Ingredients: None
Uses: Emulsifiable Textile Lubricant.
PHYSICAL DESCRIPTION AND PROPERTIES
Colour: Clear Water White.
Appearance: Clear Oil.
Form: Liquid
Boiling Point: No Data.
Melting Point: Not Applicable
Vapour Pressure: mm Hg: <1.
Specific Gravity: kg/L @ 15.0掳C: 0.88.
Volatiles: Not Applicable
Evaporation Rate: Not Applicable
Vapour Density: Not Applicable
Odour: Slight oil odour
Solubility in Water: 100% @ 15掳C
FLASH POINT
Solvent: Not Applicable
Lubricant residue: >200掳C
Flammability Limits : Not Applicable
Auto ignition
Temperature: No Data
140MSDS
MATERIAL SAFETY DATA SHEET MAINLUBE 140
Page 2 of 3
INGREDIENTS Aug-05
Chemical Name CAS Number Proportion
Medicinal Paraffin Oil 8042-47-5 >60
Non-Ionic Emulsifiers 68920-66-1 <30%
Bactericide 9016-45-9 <0.3%
HEALTH HAZARD INFORMATION
HEALTH EFFECTS:
Acute:
Swallowed: If swallowed and person is conscious give water or milk. Ingestion or
subsequent vomiting may result in its aspiration which could cause
pneumonitis.
Skin: Prolonged or frequent contact may cause irritation or skin cracking.
Eyes: May cause moderate eye irritation.
Inhaled: Vapour or mist at concentrations exceeding ACGIH TLV may be
irritating to the respiratory tract.
Chronic:
LC 50: No Data
LD 50: No Data
FIRST AID:
Swallowed: Do not induce vomiting. Aspiration of the fluid may cause lung injury
(pneumonitis). Call a Doctor immediately.
Skin: Wash thoroughly with soap and water.
Eyes: Flush with water for 15 minutes, at least with eyelids open.
Inhaled: If respiratory irritation occurs move person to fresh air. If irritation
continues call a Doctor.
FIRST AID FACILITIES:.
ADVICE TO DOCTOR:
Refer First Aid above.
PRECAUTIONS FOR USE
Exposure Standards: The ACGIH TLV for mineral oil mists is 5mg/m鲁 for a
daily 8 hours exposure.
Engineering Controls: As for oil mists.
Personal Protection: Avoid prolonged or frequently repeated contact.
Wash
skin thoroughly with soap and water after contact.
Use safety glasses and neoprene or nitrile rubber
gloves for frequent contact.
Flammability: Product is not classed flammable. Flash Point
greater than 190掳C
Product may support combustion. Do not store with
strong oxidants.
140MSDS
MATERIAL SAFETY DATA SHEET MAINLUBE 140
SAFE HANDLING INFORMATION Page 3 of 3
Aug-05
Storage and Transport: Store in steel or HDPE plastic drums.
Store away from strong oxidising agents.
Storage Temperature: Store in a cool dry place.
UN Class: No Data
Packaging Group: None Assigned
UN Number: None Assigned
EPG Number: None Assigned
Correct Shipping Name: Textile Industry Lubricant.
Spills and Disposals: Absorbents such as cat litter, clays and rags to clean
up spills. Dispose of absorbent in approved disposal
containers.
Fire/Explosion Hazard: The product is combustionable - refer to Flash Point.
Should fire occur use dry chemical, foam or carbon
dioxide to extinguish.
Decomposition Products: High temperature thermal decomposition may promote
formation Oxides of carbon, Nitrogen,
Sulfur and Phosphorus.
Hazchem Code: None Assigned
Extinguishant: Dry chemical, foam or carbon dioxide.
DANGER OF VIOLENT REACTION OR EXPLOSION: NO
Protective Clothing; Applicable to degree of fire.
Appropriate Measures; No Data
Evacuate; Not Usually
OTHER INFORMATION:
140 Is not expected to present environmental problems other than those associated with
oil spills.
High temperature thermal decomposition may promote formation Oxides of carbon,
Nitrogen, Sulfur and Phosphorus.
CONTACT POINT:
Mr Steve Simmonds
Mainlube Superior Maintenance Lubricants Pty Ltd.
14 Underwood Ave, Botany. NSW, 2019, Australia
Ph 02-9700-0880. Fax 02-9700-0881.
Mob 0412-644-244.
24 Hour Emergency Tel No. Above Mobile Phones
Emergency Services Dial 000
We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind,
express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
140MSDS
|