STATEMENT OF HAZARDOUS NATURE
Non Hazardous According to Criteria of Work safe Australia
IDENTIFICATION
Product Name: Liquid Intelligents 252
Chemical Name: Hydraulic Oil Up-Grade Additive.
Other Names: None Assigned
Manufacturer鈥檚 Product Code: 252
UN Number: None Assigned
Dangerous Goods Class None Assigned.
Subsidiary Risk[s]: None Assigned
Hazchem Code: None Assigned
EPG NO: None Assigned
Poisons Schedule Number: None Assigned
Toxic and Hazardous
Ingredients: None
Uses: Oil and Grease Additive.
PHYSICAL DESCRIPTION AND PROPERTIES
Colour: Clear.
Appearance: Light Coloured Liquid.
Form: Liquid
Boiling Point: No Data.
Melting Point: No Data
Vapour Pressure: Not Determined
Specific Gravity: 0.88 at 15.60 Deg C
Volatiles: Unknown
Evaporation Rate: Not Determined
Vapour Density: Not Determined
Odour: Mild
Solubility in Water: Insoluble
FLASH POINT
Solvent: Not Applicable
Lubricant residue: 223 掳 (PMCC)
C
Flammability Limits: Unknown
Auto ignition
Temperature: No Data
1 of 1
Update: October 05
OTHER PROPERTIES
Hazardous Ingredients: This material is not known to contain greater than
0.1% of any carcinogen required to be listed under
the OSHA Hazard Communication Standard (29CFR
1910.1200.
Please note that the chemical identity of some or all
of the above hazardous ingredients is confidential
business information and is being withheld as
permitted by 29CFR 1910.1200 and various State
Right to Know Laws.
INGREDIENTS
Chemical Name CAS Number Proportion
Mixture Mixture
HEALTH HAZARD INFORMATION
HEALTH EFFECTS:
Acute:
Swallowed: If material is misted or if vapours are generated from heating,
exposure may cause irritation of mucous membranes and the
upper respiratory tract similar to that observed with mineral oil.
Based on data from components or similar materials. Under good
industrial hygiene practices where all exposure limits are
observed, respiratory irritation should not be a problem.
Skin: Not expected to be a primary skin irritant. Based on data from
components or similar materials. Prolonged or repeated skin
contact as from clothing wet with material may cause dermatitis.
Symptoms may include redness, edema, drying, defatting and
cracking of the skin.
Eyes: Not expected to cause eye irritation. Based on data from
components or similar materials.
Inhaled: No data available to indicate product or components may be toxic
or respiratory sensitisers.
Chronic:
LC 50: No Data
LD 50: No Data
FIRST AID:
Swallowed: Do not induce vomiting. If conscious, give two glasses of water.
Get immediate medical attention.
2 of 2
Update: October 05
Skin: Wash with soap and water. Get medical attention if irritation
develops. Launder contaminated clothing before reuse.
Eyes: Flush with water at least 15 minutes. Get medical attention if eye
irritation develops or persists.
Inhaled: Remove exposed person to fresh air if adverse effects are
observed.
ADVICE TO PHYSICIAN: Treat symptomatically.
PRECAUTIONS FOR USE
Exposure Standards: The ACGIH TLV for mineral oil mists is 5mg/m鲁 for a
daily 8 hours exposure.
Engineering Controls: As for oil mists
Personal Protection: Avoid prolonged or frequently repeated contact
Wash skin thoroughly with soap and water after
contact. Use safety glasses and neoprene or nitrile
rubber gloves for frequent contact.
Flammability: Product is not classed flammable. Flash Point
greater than 190掳C
Product may support combustion. Do not store with
strong oxidants.
SAFE HANDLING INFORMATION
Storage and Transport: Keep containers closed when not in use.
Storage Temperature: Material is normally stable at moderately elevated
temperatures and pressures.
UN Class: None Assigned
Packaging Group: None Assigned
UN Number: None Assigned
EPG Number: None Assigned
Correct Shipping Name: Industry Oil and Grease Additive.
Spills and Disposals: Personal protective equipment must be worn
Ventilate area if spilled in confined space or other
poorly ventilated areas. Prevent entry into sewers
and waterways. Pick up free liquid for recycle and/or
disposal. Residue liquid can be absorbed on inert
material. Check under Transportation and Labelling
(DOT/CERCLA) and other regulatory Information
Section (SARA) for hazardous substances to
determine regulatory reporting requirements for
spills.
3 of 3
Update: October 05
Fire/Explosion Hazard: Not Known
Decomposition Products: Smoke, carbon monoxide, aldehydes and other
products of incomplete combustion.
Hazchem Code: None Assigned
Extinguishant: CO2 dry chemical, alcohol foam. Water can be used
to cool and protect exposed material.
DANGER OF VIOLENT REACTION OR EXPLOSION: No
Protective Clothing; Refer to Personal Protection/
Appropriate Measures; No Data
Evacuate; No Data
OTHER INFORMATION:
No other health hazards known.
Unusual Fire & Explosion Hazards: Toxic fumes; gases or vapours may evolve on
burning.
CONTACT POINT:
Peter Maher
Liquid Intelligents Pty Ltd
14 Underwood Ave Botany, NSW, 2019, Australia
Ph 02-9700 0880. Fax 02-9700 0881.
Mob 0423 593 261
24 Hour Emergency Tel No. Above Mobile Phones
Emergency Services Dial 000
Disclaimer:
*************************************************************************************
Liquid Intelligents. provides the information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This document is
intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information
must exercise their independent judgment in determining its appropriateness for a particular purpose. LIQUID INTELLIGENTS, MAKES NO REPRESENTATIONS OR
WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS.
ACCORDINGLY, LIQUID INTELLIGENTS WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS
INFORMATION.
*************************************************************************************
4 of 4
Update: October 05
|