Mainlube Superior Maintenance Lubricants Pty Ltd
14 Underwood Ave, Botany NSW 2019
Ph 02-9700-0880. Fax 02-9700-0881.
ACN No. 001 748 876
____________________________________________________________________________________________________________
STATEMENT OF HAZARDOUS NATURE
Non Hazardous According to Criteria of Worksafe Australia
MATERIAL SAFETY DATA SHEET MAINLUBE 145
IDENTIFICATION Page 1 of 3
Aug-05
Product Name: Mainlube 145
Chemical Name: Synthetic Hi-Temperature Chain Lubricant.
Other Names: Not Applicable
Manufacturer鈥檚 Product Code: 145
UN Number: None Assigned
Dangerous Goods Class None Assigned
Subsidiary Risk[s]: None Assigned
Hazchem Code: None Assigned
EPG NO: None Assigned
Poisons Schedule Number: None Assigned
Toxic and Hazardous
Ingredients: None
Uses: Low smoke, high temperature Chain lubricant.
PHYSICAL DESCRIPTION AND PROPERTIES
Colour: Black.
Appearance: Black, Tacky Oil.
Form: Liquid
Boiling Point: Not Applicable.
Melting Point: Not Applicable
Vapour Pressure: mm Hg: <1.
Specific Gravity: kg/L @ 15.0掳C: 0.867.
Volatiles: Not Applicable
Evaporation Rate: Not Applicable
Vapour Density: Not Applicable
Odour: Oily Odour
Solubility in Water: Nil @ 20掳C
FLASH POINT
Solvent: Not Applicable
Lubricant residue: >200掳C:
Flammability Limits: No Data
Auto ignition
Temperature: Greater than 450掳C
145MSDS
MATERIAL SAFETY DATA SHEET MAINLUBE 145
INGREDIENTS Page 2 of 3
Aug-05
Chemical Name CAS Number Proportion
Proprietry Formulation
HEALTH HAZARD INFORMATION
HEALTH EFFECTS:
Acute:
Swallowed: If swallowed and person is conscious give water or milk. Ingestion or
subsequent vomiting may result in its aspiration which could cause
pneumonitis.
Skin: Prolonged or frequent contact may cause irritation or skin cracking.
Eyes: May cause moderate eye irritation.
Inhaled: Vapour or mist at concentrations exceeding ACGIH TLV may be
irritating to the respiratory tract.
Chronic:
LC 50: No Data
LD 50: No Data
FIRST AID:
Swallowed: Do not induce vomiting. Aspiration of the fluid may cause lung injury
(pneumonitis). Call a Doctor immediately.
Skin: Wash thoroughly with soap and water.
Eyes: Flush with water for 15 minutes, at least with eyelids open.
Inhaled: If respiratory irritation occurs move person to fresh air. If irritation
continues call a Doctor.
FIRST AID FACILITIES:.
ADVICE TO DOCTOR: Refer First Aid above.
PRECAUTIONS FOR USE
Exposure Standards: The ACGIH TLV for mineral oil mists is 5mg/m鲁 for a
daily 8 hours exposure.
Engineering Controls: As for oil mists.
Personal Protection: Avoid prolonged or frequently repeated contact.
Wash
skin thoroughly with soap and water after contact.
Use safety glasses and neoprene or nitrile rubber
gloves for frequent contact.
Flammability: Product is not classed flammable. Flash Point
greater than 260掳C
Product may support combustion. Do not store with
strong oxidants.
SAFE HANDLING INFORMATION
Storage and Transport: Store in steel or HDPE plastic drums. Store
away from strong oxidising agents.
Storage Temperature: Store in a cool dry place.
145MSDS
MATERIAL SAFETY DATA SHEET MAINLUBE 145
SAFE HANDLING INFORMATION CONTINUED Page 3 of 3
Aug-05
UN Class: None assigned
Packaging Group: None assigned
UN Number: None assigned
EPG Number: None assigned
Correct Shipping Name: Synthetic Hi-Temperature Chain Lubricant.
Spills and Disposals: Mop up oil with rags or cleaning equipment.
Destroy rags by burning when it is safe to do so.
Prevent entry into sewers and waterways.
Note: Product may be slippery.
Remove all ignition sources. Contain spilled liquid with
sand and earth.
Dispose of as per local regulation - do not store or mix
with strong oxidants.
DANGER OF VIOLENT REACTION OR EXPLOSION: NO
Protective Clothing; Applicable to degree of fire.
Appropriate Measures; No Data
Evacuate; Not Usually
Fire/Explosion Hazard: Not a fire hazard. Auto ignition temperature is in excess
of 450掳C. Should fire occur, however, use dry chemical,
foam or carbon dioxide to extinguish.
Decomposition Products: Incomplete high temperature thermal decomposition
may promote toxic fumes.
Hazchem Code: None assigned
Extinguishant: Dry chemical, foam or carbon dioxide.
OTHER INFORMATION:
145 Synthetic Hi-Temperature Chain Lubricant is not expected to present environmental
problems other than those associated with oil spills.
CONTACT POINT:
Mr Steve Simmonds
Mainlube Superior Maintenance Lubricants Pty Ltd.
14 Underwood Ave, Botany. NSW, 2019, Australia
Ph 02-9700-0880. Fax 02-9700-0881.
Mob 0412-644-244.
24 Hour Emergency Tel No. Above Mobile Phones
Emergency Services Dial 000
We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind,
express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
145MSDS
|