Part Number(s):
MATERIAL SAFETY DATA SHEET 59-900-01,59-900-02,59-900-
Form WI04-11A Rev. 1
03,59-900-04
Product Name: TWIN-TIES
Release Date: November 17,
2005
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
Twin -Ties Refer to part number
Chemical Name Manufacture / Distributor
Polyurethane polyester elastomer GAC International Inc.
C.A.S. Number Address
26375-23-5 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
NA 1-631-419-1700
2. Composition of Ingredients
Hazardous Components C.A.S. Number Exposure Limits %
Polyurethane from 4,4鈥? methylenediphenyl 26375-23-5 NA 99
No hazardous ingredients
3. Hazard Identification
Emergency Overview
Caution: Contact with hot material will cause thermal burns; Toxic gases/fumes are given off during burning or decomposition and may cause
allergic skin and respiratory reaction; Melted product is flammable and produces intense heat and dense smoke during burning.
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
NA NA NA Acute eye contact: Mechanical NA
Eye
irritation. Chronic eye contact:
None
NA NA NA NA NA
Skin
NA NA NA Acute inhalation: No significant NA
Inhalation
health hazard. Chronic inhalation:
None
NA NA NA NA NA
Ingestion
NA NA NA NA NA
Other
Medical Conditions Aggravated by Exposure
None
Carcinogenicity (IARC, NTP)
None
Potential Environmental Effects
NA
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
Flush eyes with water Get medical attention if NA
Eye
irritation persists
Wash exposed skin with soap and NA NA
Skin
water
Remove to uncontaminated area NA NA
Inhalation
No adverse effects anticipated by NA NA
Ingestion
this route of exposure incidental to
prop industrial handling
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 59-900-01,59-900-02,59-900-
Form WI04-11A Rev. 1
03,59-900-04
Product Name: TWIN-TIES
Release Date: November 17,
2005
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
掳C / 掳F N/A LEL: N/A UEL: N/A NA
NA
Properties Contributing to Flammability Classification
Flame Propagation or Burning
Fire Intensity Health-, Flammability-, Reactivity-NA
NA
NA
Extinguishing Media Extinguishing Media to Avoid
Foam, carbon dioxide, water, fog, dry chemical NA
Protection and Procedures for Firefighters
None
Unusual Fire and Explosion Hazards
None
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
Contain and remove by mechanical means
Evacuation Procedures
NA
Special Instructions
NA
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
Shelf life: 2 years
Storage Practices and Warnings
(掳C / 掳F). Ambient. Store in sealed containers. Protect from atmospheric mixture
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
Adequate ventilation practice NA
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Eye/Face Safety goggles NA
Skin None required NA
Inhalation None NA
General Hygiene Considerations and Work Practices
NA
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
None
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 59-900-01,59-900-02,59-900-
Form WI04-11A Rev. 1
03,59-900-04
Product Name: TWIN-TIES
Release Date: November 17,
2005
9. Physical and Chemical Characteristics
Appearance Odor
Various F.D.A. allowable colors Odorless
Boiling Point 掳C / 掳F N/A
Normal Physical State:
Liquid Gas
Melting Point 掳C /390-440 掳F
Solid (Other) Freezing Point 掳C / 掳F
Specific Gravity or Density (H20=1) Solubility in Water pH
1.2 g/cm3 Insoluble NA
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
N/A NA NA
Other
Bulk density: Approx. 10.01 lbs/cm3
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
None known
Hazardous Products Produced During Decomposition
By fire; carbon monoxide, carbon dioxide, traces of HCN and MDI
Hazardous Polymerization? Conditions to Avoid
掳C / 掳F NA
May Occur May Not Occur
Stability? Conditions to Avoid
Stable Unstable 掳C / 掳F NA
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
Toxicity tests have not been conducted on this product
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
None
13. Disposal Considerations
Regulations
Waste disposal method: In accordance to federal, sate or local regulations
Properties (Physical/Chemical) Affecting Disposal
NA
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
Twin ties N/A
Yes No
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
Non-hazardous Not hazardous by
Yes No
D.O.T regulations
Other
NA
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 59-900-01,59-900-02,59-900-
Form WI04-11A Rev. 1
03,59-900-04
Product Name: TWIN-TIES
Release Date: November 17,
2005
15. Regulatory Information
Federal Regulations
SARA TITLE III: Section 302 Extremely hazardous substances: None Section 311/312 Hazard categories: None Section 313 Toxic chemicals:
None RERA Status: Non-hazardous
International Regulations
NA
Other
HMIS RATINGS: Health1 flammability 1 Reactivity 0 0=minimal 1= slight 2= moderate 3=serious 4= severe
16. Other Information
Supplier Number: 31/59 Supplier Release: January 7, 2003
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|